1950680000

    Data sheet... W-Series WTR 2.5 RT Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality tinned copper for optimum conductivity. All materials comply with RoHS requirements and have been tested to current environment guidelines. General ordering data   Order No. Type Version GTIN (EAN) Qty.   1950680000 WTR 2.5 RT W-Series, Test-disconnect terminal, Screw connection 4032248672172 100 pc(s). Creation date May 23, 2013 11:57:52 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 1     Data sheet... W-Series WTR 2.5 RT   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height Net weight   60 mm 48 mm 9.29 g       Width Height of lowest version   -50 °C     Storage temperature Continuous operating temp., max. 5.1 mm 49 mm Temperatures   Operating temperature Continuous operating temp., min.   120 °C 2 clampable wires (H05V/H07V) same cross-section (rated connection)   Wire connection cross section, finely stranded, two clampable wires, min. Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.   0.5 mm²     Wire cross-section, finely stranded, two clampable wires, max. 1.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max. 1.5 mm²     Open sides Version right Screw connection, Disconnection element, for plug-in cross-connector, One end without connector       Voltage size C (CSA) Wire cross section max. (CSA)   300 V 12 AWG           Blade size Clamping range, rated connection, min. Clamping screw Tightening torque, max. Gauge to IEC 60947-1 0.6 x 3.5 mm 0.05 mm² M 2.5 0.8 Nm   Wire connection cross section, solid core max. rated connection Wire connection cross section, finely stranded, max. Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. Wire connection cross section AWG, min. 0.5 mm² Additional technical data   Explosion-tested version Type of mounting   No Snap-on CSA ratings data   Certificate No. (CSA) Current size C (CSA) Wire cross section min. (CSA)   154685-1152890 10 A 26 AWG Clampable wires (rated connection)   Type of connection Screw connection Connection direction on side Clamping range, rated connection, max. 4 mm² Tightening torque, min. 0.4 Nm Torque level with DMS electric screwdriver 1 Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 2.5 mm² Wire connection cross section AWG, max. AWG 12               A3 4 mm² 4 mm² 0.5 mm² AWG 30   Dimensions   TS 35 offset   32 mm Creation date May 23, 2013 11:57:52 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 2     Data sheet... W-Series WTR 2.5 RT   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Disconnect terminals   Tightening torque, max. Torque level with DMS electric screwdriver       Tightening torque, min.   0.4 Nm       Rated impulse withstand voltage Current at maximum wires Pollution severity 6 kV 24 A 3       Voltage size C (UR) 600 V Conductor size Factory wiring max. (UR) 12 AWG Conductor size Field wiring max. (UR) 12 AWG Wemid V-0     Colour   Red W-Series on side TS 35       Type of connection Levels cross-connected internally End cover plate required Screw connection No Yes EC000902 27-14-11-26 27-14-11-26       UNSPSC eClass 6.2   30-21-18-11 27-14-11-26 0.8 Nm 1 Rated data   Rated voltage Rated current Standards   500 V 24 A IEC 60947-7-1 UL ratings data   Certificate No. (UR) E60693VOL1SEC68 Current size C (UR) 20 A Conductor size Factory wiring min. (UR) 30 AWG   Material data   Material UL 94 flammability rating   System specifications   Product family Connection direction Mounting rail   Classifications   ETIM 3.0 eClass 5.1 eClass 7.1   Product information   Descriptive text technical data   2.5 mm² conductor with wire end ferrule plus plastic collar only with collar optimised for diameter (order No. 1333100000, 500 pcs) Approvals   Approvals ROHS   Conform Creation date May 23, 2013 11:57:52 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 3