1961750000

    Data sheet... W-Series WTR 2.5 D+ 2STB 6.9/2.3 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     The versatile and extensive range of products - from 0.05 mm² to 300 mm² - means that you have diverse options for your applications at your disposal. Hardened steel for mechanical strength and high-quality tinned copper for optimum conductivity. All materials comply with RoHS requirements and have been tested to current environment guidelines. General ordering data   Order No. Type Version GTIN (EAN) Qty.   1961750000 WTR 2.5 D+ 2STB 6.9/2.3 W-Series, Test-disconnect terminal, Rated crosssection: 2.5 mm², Screw connection 4032248642496 25 pc(s). Creation date May 23, 2013 11:56:00 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 1     Data sheet... W-Series WTR 2.5 D+ 2STB 6.9/2.3   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height Net weight   60 mm 48 mm 9.03 g       Width Height of lowest version   -50 °C     Storage temperature Continuous operating temp., max. 5.1 mm 49 mm Temperatures   Operating temperature Continuous operating temp., min.   120 °C 2 clampable wires (H05V/H07V) same cross-section (rated connection)   Wire connection cross section, finely stranded, two clampable wires, min. Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, min.   0.5 mm²     Wire cross-section, finely stranded, two clampable wires, max. 1.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, 2 clampable wires, max. 1.5 mm²       Explosion-tested version Open sides Version No right Screw connection, Disconnection element, with diode, with sockets, One end without connector       Voltage size C (CSA) Wire cross section max. (CSA)   300 V 12 AWG             Stripping length 10 mm Connection direction on side Clamping range, rated connection, min. 0.13 mm² Clamping screw M3 Tightening torque, max. 0.6 Nm Wire connection cross section, solid core, max. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 1.5 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 2.5 mm² Wire connection cross section AWG, max. AWG 12 0.5 mm² Additional technical data   Electronic component Number of similar terminals Type of mounting   Diode 1 Snap-on CSA ratings data   Certificate No. (CSA) Current size C (CSA) Wire cross section min. (CSA)   200039-1152890 10 A 26 AWG Clampable wires (rated connection)   Type of connection Blade size Number of connections Clamping range, rated connection, max. Tightening torque, min. Gauge to IEC 60947-1 Wire connection cross section, solid core max. rated connection Wire connection cross section, finely stranded, max. Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. Wire connection cross section AWG, min.   Screw connection 0.6 x 3.5 mm 2 4 mm² 0.5 Nm A3 4 mm² 4 mm² 0.5 mm² 0.5 mm² AWG 26           Creation date May 23, 2013 11:56:01 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 2     Data sheet... W-Series WTR 2.5 D+ 2STB 6.9/2.3   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions   TS 35 offset   32 mm     0.6 Nm   Tightening torque, min. 0.5 Nm 2.5 mm² 6 kV 14 A 3         Rated voltage Rated current Standards   500 V 14 A IEC 60947-7-1 E60693VOL1SEC68 20 A 30 AWG       Voltage size C (UR) Wire cross section max. (UR)   300 V 12 AWG Wemid V-0     Colour   Dark Beige W-Series on side 2 No Yes           Type of connection Number of levels No. of clamping points per level Mounting rail   Screw connection 1 2 TS 35 EC000902 27-14-11-26 27-14-11-26       UNSPSC eClass 6.2   30-21-18-11 27-14-11-26 Disconnect terminals   Tightening torque, max.   Rated data   Rated cross-section Rated impulse withstand voltage Current at maximum wires Pollution severity   UL ratings data   Certificate No. (UR) Current size C (UR) Wire cross section min. (UR)   Material data   Material UL 94 flammability rating   System specifications   Product family Connection direction Number of connections Levels cross-connected internally End cover plate required   Classifications   ETIM 3.0 eClass 5.1 eClass 7.1   Product information   Descriptive text ordering data Descriptive text technical data   Conductor 2.5 mm² with wire end ferrule (WEF) only with diameter optimised WEF(Order No. 1333100000, VPE 500) Only 250V allowed at the diode Approvals   Approvals ROHS   Conform Creation date May 23, 2013 11:56:01 PM CEST   Catalogue status 27.9.2012 / We reserve the right to make technical changes. 3