1977610000

    Data sheet OMNIMATE Signal - series LL LL2N 5.08/34/90 3.2SN OR BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Preliminary product data! Product image Similar to illustration Low single-tier and multi-tier PCB terminals featuring proven clamping-yoke connections, in 5.00mm and 5.08mm pitch, with 90° conductor outlet direction. Suitable for conductor cross-sections up to 6.0 mm². General ordering data   Type Order No. Version GTIN (EAN) Qty. Product data Packaging LL2N 5.08/34/90 3.2SN OR BX 1977610000 Printed circuit board terminals, 5.08 mm, Number of poles: 34, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Clamping yoke connection, Clamping range, max. : 6 mm², Box 4032248673223 10 pc(s). IEC: 500 V / 32.5 A / 0.5 - 6 mm² UL: 300 V / 20 A / AWG 26 - AWG 12 Box Creation date August 11, 2020 6:11:38 PM CEST     Catalogue status 24.07.2020 / We reserve the right to make technical changes. 1     Data sheet OMNIMATE Signal - series LL LL2N 5.08/34/90 3.2SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Height of lowest version Depth (inches)   84.47 34.32 mm 31.12 mm 0.866 inch         Width (inches) Height (inches) Depth Net weight OMNIMATE Signal - series LL WireReady 90° 0.2 inch Yes 3.2 mm 1.3 mm 1 DIN 5264 0.6 Nm 6 mm   Wire connection method 3.326 inch 1.351 inch 21.99 mm 60.629 g System parameters   Product family Property, clamping point Conductor outlet direction Pitch in inches (P) Fitted by customer Solder pin length (l) Solder eyelet hole diameter (D) Number of solder pins per pole Screwdriver blade standard Tightening torque, max. Stripping length L1 in inches Touch-safe protection acc. to DIN VDE 57 106   3.5 inch Safe from finger touch   Clamping yoke connection Mounting onto the PCB THT solder connection Pitch in mm (P) 5.08 mm Number of poles 34 Max. adjacent poles per row 24 Solder pin dimensions 0.75 x 0.9 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm Screwdriver blade 0.6 x 3.5 Tightening torque, min. 0.5 Nm Clamping screw M3 L1 in mm 88.9 mm Touch-safe protection acc. to DIN VDE 0470 IP 20         Colour Insulating material group Insulation strength                       Material data   Insulating material Colour chart (similar) Comparative Tracking Index (CTI) UL 94 flammability rating GWFI Contact surface Tinning type Storage temperature, min. Operating temperature, min. Temperature range, installation, min.   Wemid (PA) RAL 2000 ≥ 600 V-0 960 °C tinned matt -40 °C -50 °C -25 °C               GWIT Contact material Coating Layer structure of solder connection Storage temperature, max. Operating temperature, max. Temperature range, installation, max. orange I ≥ 108 Ω 960 °C Copper alloy 4-6 μm SN 2...4 µm Ni / 4...6 µm Sn matt 70 °C 120 °C 120 °C Conductors suitable for connection   Clamping range, min. 0.08 mm² Clamping range, max. 6 mm² Wire connection cross section AWG, AWG 26 min. Wire connection cross section AWG, AWG 12 max. Solid, min. H05(07) V-U 0.5 mm² Solid, max. H05(07) V-U 6 mm² Flexible, min. H05(07) V-K 0.5 mm² Flexible, max. H05(07) V-K 4 mm² w. plastic collar ferrule, DIN 46228 pt 4, 0.5 mm² min. w. plastic collar ferrule, DIN 46228 pt 4, 2.5 mm² max. w. wire end ferrule, DIN 46228 pt 1, 0.5 mm² min. Creation date August 11, 2020 6:11:38 PM CEST   Catalogue status 24.07.2020 / We reserve the right to make technical changes. 2     Data sheet OMNIMATE Signal - series LL LL2N 5.08/34/90 3.2SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data w. wire end ferrule, DIN 46228 pt 1, max. Plug gauge in accordance with EN 60999 a x b; ø Clampable conductor Reference text Max. clamping range   2.5 mm² 2.8 mm x 2.4 mm; 3.0 mm Cross-section for conductor connection Type fine-wired nominal 0.5 mm² Stripping length nominal 8 mm wire end ferrule Recommended wire- H0,5/12 OR end ferrule nominal 6 mm Stripping length Recommended wire- H0,5/6 end ferrule Type fine-wired Cross-section for conductor connection nominal 0.75 mm² Stripping length nominal 8 mm wire end ferrule Recommended wire- H0,75/12 W end ferrule nominal 6 mm Stripping length Recommended wire- H0,75/6 end ferrule Type fine-wired Cross-section for conductor connection nominal 1 mm² Stripping length nominal 8 mm wire end ferrule Recommended wire- H1,0/12 GE end ferrule nominal 6 mm Stripping length Recommended wire- H1,0/6 end ferrule Length of ferrules is to be chosen depending on the product and the rated voltage., The outside diameter of the plastic collar should not be larger than the pitch (P) 6 mm² Rated data acc. to IEC   tested acc. to standard Rated current, max. number of poles (Tu=20°C) Rated current, max. number of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree III/2 Rated impulse voltage for surge voltage class/ pollution degree II/2 Rated impulse voltage for surge voltage class/ contamination degree III/3   IEC 60664-1, IEC 61984 26 A 22 A 320 V 4 kV 4 kV     Rated current, min. number of poles (Tu=20°C) Rated current, min. number of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree II/2 Rated voltage for surge voltage class / pollution degree III/3 Rated impulse voltage for surge voltage class/ pollution degree III/2 Short-time withstand current resistance       Rated voltage (Use group D / CSA) Rated current (Use group D / CSA) Wire cross-section, AWG, max.         32.5 A 27.5 A 500 V 250 V 4 kV 3 x 1s with 120 A Rated data acc. to CSA   Rated voltage (Use group B / CSA) Rated current (Use group B / CSA) Wire cross-section, AWG, min.   300 V 20 A AWG 26 300 V 10 A AWG 12 Creation date August 11, 2020 6:11:38 PM CEST   Catalogue status 24.07.2020 / We reserve the right to make technical changes. 3     Data sheet OMNIMATE Signal - series LL LL2N 5.08/34/90 3.2SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rated data acc. to UL 1059   Institute (UR) Rated voltage (Use group B / UL 1059) Rated current (Use group B / UL 1059) Wire cross-section, AWG, min. Reference to approval values     Certificate No. (UR) 300 V 20 A AWG 26 Specifications are maximum values, details see approval certificate.         E60693 Rated voltage (Use group D / UL 1059) 300 V Rated current (Use group D / UL 1059) 10 A Wire cross-section, AWG, max. AWG 12   Box 0     VPE length VPE height 0 0 EC002643 27-44-04-01 27-44-04-01       ETIM 7.0 eClass 9.1 UNSPSC EC002643 27-44-04-01 30-21-18-11 Packing   Packaging VPE width   Classifications   ETIM 6.0 eClass 9.0 eClass 10.0   Notes   Notes IPC conformity   • Long term storage of the product with average temperature of 50 °C and average humidity 70%, 36 months Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. Approvals   Approvals ROHS   Conform Creation date August 11, 2020 6:11:38 PM CEST   Catalogue status 24.07.2020 / We reserve the right to make technical changes. 4     Data sheet OMNIMATE Signal - series LL LL2N 5.08/34/90 3.2SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Dimensional drawing Graph Creation date August 11, 2020 6:11:38 PM CEST   Catalogue status 24.07.2020 / We reserve the right to make technical changes. 5 Wave Solder Profile   Recommended wave solderding profiles Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com   Single Wave:   260 Contact time appr. 3 sec. 260 °C 255 °C 250 °C 240 220 200 Temperature [°C] 180 160 140 appr. 150 °C Preheating 120 100 Cooling rate < 6 °K/s 80 60 Typical process Prozess limits Temperature on board 40 Heating rate < 3 °K/s 20 0 0 20 40 60 80 100 120 time [s] 140 160 180 200 220 240 Double Wave: 255 °C Total contact time max. 10 sec. 260 240 260 °C 250 °C 220 200 Temperature [°C] 180 160 140 appr. 150°C Preheating 120 100 Cooling rate < 6 °K/s 80 60 Typical process Process limits Temperature on board 40 Heating rate < 3 °K/s 20 0 0 20 40 60 Wave soldering profiles 80 100 120 time [s] 140 160 180 200 220 240 Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are qualified. When choosing a suitable profile for your application, the following factors also need to be considered: - PCB thickness - Proportion of Cu in the layers - Single/double-sided assembly - Product range - Heating and cooling rates The single and double wave profiles each indicate the recommended operating range, including the maximum soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above maximum profile.   We reserve the right to make technical changes.