1989930000

    Data sheet A-series ADT 2.5 2C W/O DTLV Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Spring connection with PUSH IN Technology The innovative PUSH IN technology reduces the amount of time you spend on wiring to a minimum. Direct insertion guarantees high conductor pull-out forces and simple handling for all conductor types. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ADT 2.5 2C W/O DTLV 1989930000 Test-disconnect terminal, PUSH IN, 2.5 mm², 500 V, 20 A, Dark Beige 4050118374483 50 pc(s). Creation date January 26, 2018 7:05:18 PM CET   Catalogue status 12.01.2018 / We reserve the right to make technical changes. 1     Data sheet A-series ADT 2.5 2C W/O DTLV   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   5.1 mm 77.5 mm 36.5 mm 37 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.201 inch 3.051 inch 1.437 inch 9.117 g -60 °C   Continuous operating temp., max. 130 °C Wemid Orange     Colour UL 94 flammability rating Dark Beige V-0 Yes 1 1 No No No             Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   1 2 No TS 35 No Mounting rail No TS 35       Open sides Type of fixing With snap-in pegs right Snap-on No 200039-70089609 20 A 300 V 600 V 28 AWG           Current size B (CSA) Current size D (CSA) Voltage size C (CSA) Wire cross section max. (CSA)   20 A 5A 300 V 12 AWG Temperatures   Continuous operating temp., min.   Material data   Material Colour of operational elements   System specifications   End cover plate required Number of levels Number of potentials per tier PE connection N-function PEN function   Additional technical data   Installation advice Snap-on Type of mounting   CSA rating data   Certificate No. (CSA) Current size C (CSA) Voltage size B (CSA) Voltage size D (CSA) Wire cross section min. (CSA)   Creation date January 26, 2018 7:05:18 PM CET   Catalogue status 12.01.2018 / We reserve the right to make technical changes. 2     Data sheet A-series ADT 2.5 2C W/O DTLV   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, rated connection, min. Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. Number of connections Twin wire-end ferrules, max. Type of connection Wire connection cross section AWG, min. 0.6 x 3.5 mm 0.14 mm² 0.5 mm² 2 0.75 mm² PUSH IN AWG 28 Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Wire connection cross section, solid core max. rated connection 2.5 mm² Wire connection cross section, stranded, rated connection, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 2.5 mm²       Clamping range, rated connection, max. 2.5 mm² Connection direction top Gauge to IEC 60947-1       Stripping length Twin wire-end ferrules, min. Wire connection cross section AWG, max. Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. Wire connection cross section, finely stranded, max.           A3 10 mm 0.5 mm² AWG 12 2.5 mm² 2.5 mm² Wire connection cross section, solid core, min. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 0.5 mm² Wire connection cross-section, finely stranded, min. 0.5 mm²   Disconnect terminals   Cross-disconnect   without   Integral test socket Yes 2.5 mm² 20 A       Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity   500 V 20 A Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage Surge voltage category   IEC 60947-7-1 6 kV III     1.33 mΩ 3 UL rating data   Certificate No. (cURus) E60693 Conductor size Factory wiring min. (cURus) 28 AWG Conductor size Field wiring min. (cURus) 28 AWG Current size C (cURus) 20 A Voltage size B (cURus) 300 V Voltage size D (cURus) 600 V           Conductor size Factory wiring max. (cURus) 12 AWG Conductor size Field wiring max. (cURus) 12 AWG Current size B (cURus) 20 A Current size D (cURus) 5A Voltage size C (cURus) 300 V       eClass 6.2       Classifications   ETIM 6.0 eClass 9.1   EC000902 27-14-11-26 27-14-11-26 Creation date January 26, 2018 7:05:18 PM CET   Catalogue status 12.01.2018 / We reserve the right to make technical changes. 3     Data sheet A-series ADT 2.5 2C W/O DTLV   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Product information   Descriptive text technical data Descriptive text accessories   Approval in progress All MultiMark variants (MM) = strip markers Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data   DE_PT0102_20160620_024_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S Safety note   Safety notice   Safety Information Creation date January 26, 2018 7:05:18 PM CET   Catalogue status 12.01.2018 / We reserve the right to make technical changes. 4     Data sheet A-series ADT 2.5 2C W/O DTLV   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date January 26, 2018 7:05:18 PM CET   Catalogue status 12.01.2018 / We reserve the right to make technical changes. 5