Data sheet
OMNIMATE Power - series BU/SU 10.16IT
BUZ 10.16IT/04/180MF3 AG BK BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Product image
180° female plug with 10.16 pitch for IT power networks.
Meets the requirements of UL1059 600 V class C. In
combination with male header SU 10.16 IT with leading
contact.
Meets the extended requirements on 5.5 mm touch
safety for IT power networks as per IEC 61800-5-1 for
400 V to earth.
The self-locking (optionally also screwable) middle flange
reduces the space requirements by one pitch width in
comparison with conventional solutions.
Also optionally available without middle flange interlock.
General ordering data
Type
Order No.
Version
GTIN (EAN)
Qty.
Product data
Packaging
BUZ 10.16IT/04/180MF3 AG BK BX
2000430000
PCB plug-in connector, female plug, 10.16 mm,
No. of poles: 4, 180°, Clamping yoke connection,
Clamping range, max. : 16 mm², Box
4050118382020
18 pc(s).
IEC: 1000 V / 78.3 A / 0.2 - 16 mm²
UL: 600 V / 60 A / AWG 22 - AWG 4
Box
Creation date June 12, 2019 9:26:50 PM CEST
Catalogue status 07.06.2019 / We reserve the right to make technical changes.
1
Data sheet
OMNIMATE Power - series BU/SU 10.16IT
BUZ 10.16IT/04/180MF3 AG BK BX
Technical data
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Dimensions and weights
Net weight
56.7 g
system parameters
Product family
Wire connection method
Pitch in inches (P)
No. of poles
L1 in inches
Rated cross-section
Touch-safe protection acc. to DIN VDE
0470
Can be coded
Tightening torque, min.
Clamping screw
Plugging cycles
Pulling force/pole, max.
OMNIMATE Power - series
BU/SU 10.16IT
Clamping yoke connection
0.4 inch
4
1.6 inch
16 mm²
IP 20
Yes
1.2 Nm
M4
25
14.5 N
Type of connection
Pitch in mm (P)
Conductor outlet direction
L1 in mm
Pin series quantity
Touch-safe protection acc. to DIN VDE
57 106
Volume resistance
Stripping length
Tightening torque, max.
Screwdriver blade standard
Plugging force/pole, max.
Field connection
10.16 mm
180°
40.64 mm
1
Safe from finger touch
4.50 mΩ
12 mm
1.5 Nm
DIN 5264, ISO 8764/2-PZ
14.5 N
Material data
Insulating material
Colour chart (similar)
CTI
UL 94 flammability rating
Contact material
Layer structure of plug contact
Storage temperature, max.
Operating temperature, min.
Temperature range, installation, min.
PA GF
RAL 9011
≥ 600
V-0
Copper alloy
3- µm Ag
55 °C
-50 °C
-25 °C
Colour
Insulating material group
Insulation strength
GWFI
Contact surface
Storage temperature, min.
Max. relative humidity during storage
Operating temperature, max.
Temperature range, installation, max.
black
I
≥ 108 Ω
960 °C
silver-plated
-25 °C
80 %
130 °C
130 °C
Conductors suitable for connection
Clamping range, min.
0.2 mm²
Clamping range, max.
16 mm²
Wire connection cross section AWG,
AWG 22
min.
Wire connection cross section AWG,
AWG 6
max.
Solid, min. H05(07) V-U
0.2 mm²
Solid, max. H05(07) V-U
16 mm²
Stranded, min. H07V-R
6 mm²
Stranded, max. H07V-R
16 mm²
Flexible, min. H05(07) V-K
0.5 mm²
Flexible, max. H05(07) V-K
16 mm²
w. plastic collar ferrule, DIN 46228 pt 4, 0.25 mm²
min.
w. plastic collar ferrule, DIN 46228 pt 4, 16 mm²
max.
w. wire end ferrule, DIN 46228 pt 1, min0.25 mm²
w. wire end ferrule, DIN 46228 pt 1,
16 mm²
max.
Plug gauge in accordance with EN
5.3mm (B6)
60999 a x b; ø
Creation date June 12, 2019 9:26:50 PM CEST
Catalogue status 07.06.2019 / We reserve the right to make technical changes.
2
Data sheet
OMNIMATE Power - series BU/SU 10.16IT
BUZ 10.16IT/04/180MF3 AG BK BX
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Clampable conductor
Cross-section for conductor connection
AEH
Cross-section for conductor connection
AEH
Cross-section for conductor connection
AEH
Cross-section for conductor connection
AEH
Cross-section for conductor connection
AEH
Cross-section for conductor connection
AEH
Cross-section for conductor connection
AEH
Cross-section for conductor connection
AEH
Cross-section for conductor connection
AEH
Max. clamping range
16 mm²
Type
nominal
Stripping length
Type
nominal
Stripping length
Type
nominal
Stripping length
Stripping length
Type
nominal
Stripping length
Type
nominal
Stripping length
Stripping length
Type
nominal
Stripping length
Stripping length
Type
nominal
Stripping length
Stripping length
Type
nominal
Stripping length
Stripping length
Type
nominal
Stripping length
Stripping length
fine-wired
0.5 mm²
nominal
fine-wired
1 mm²
nominal
fine-wired
1.5 mm²
nominal
nominal
fine-wired
0.75 mm²
nominal
fine-wired
2.5 mm²
nominal
nominal
fine-wired
4 mm²
nominal
nominal
fine-wired
6 mm²
nominal
nominal
fine-wired
10 mm²
nominal
nominal
fine-wired
16 mm²
nominal
nominal
14 mm
15 mm
15 mm
12 mm
14 mm
14 mm
12 mm
12 mm
14 mm
14 mm
12 mm
12 mm
15 mm
12 mm
15 mm
Rated data acc. to IEC
tested acc. to standard
Rated current, max. no. of poles
(Tu=20°C)
Rated current, max. no. of poles
(Tu=40°C)
Rated voltage for surge voltage class /
pollution degree III/2
Rated impulse voltage for surge voltage
class/ pollution degree II/2
Rated impulse voltage for surge voltage
class/ contamination degree III/3
Clearance, min.
IEC 60664-1, IEC 61984
67.9 A
61.3 A
1,000 V
6 kV
8 kV
15.1 mm
Rated current, min. no. of poles
(Tu=20°C)
Rated current, min. no. of poles
(Tu=40°C)
Rated voltage for surge voltage class /
pollution degree II/2
Rated voltage for surge voltage class /
pollution degree III/3
Rated impulse voltage for surge voltage
class/ pollution degree III/2
Short-time withstand current resistance
Creepage distance, min.
3 x 1s mit 1000 A
15.1 mm
Rated voltage (Use group C / CSA)
Rated current (Use group B / CSA)
Rated current (Use group D / CSA)
Wire cross-section, AWG, max.
600 V
60 A
5A
AWG 4
78.3 A
70.6 A
1,000 V
1,000 V
8 kV
Rated data acc. to CSA
Rated voltage (Use group B / CSA)
Rated voltage (Use group D / CSA)
Rated current (Use group C / CSA)
Wire cross-section, AWG, min.
300 V
600 V
60 A
AWG 22
Creation date June 12, 2019 9:26:50 PM CEST
Catalogue status 07.06.2019 / We reserve the right to make technical changes.
3
Data sheet
OMNIMATE Power - series BU/SU 10.16IT
BUZ 10.16IT/04/180MF3 AG BK BX
Technical data
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Rated data acc. to UL 1059
Institute (cURus)
Rated voltage (Use group B / UL 1059)
Rated voltage (Use group D / UL 1059)
Rated current (Use group C / UL 1059)
Wire cross-section, AWG, min.
Reference to approval values
Certificate No. (cURus)
600 V
600 V
60 A
AWG 22
Specifications are
maximum values, details see approval certificate.
Rated voltage (Use group C / UL 1059)
Rated current (Use group B / UL 1059)
Rated current (Use group D / UL 1059)
Wire cross-section, AWG, max.
Box
135 mm
VPE length
VPE height
350 mm
60 mm
EC001284
EC002637
27-26-07-04
27-44-03-09
ETIM 4.0
ETIM 6.0
eClass 9.0
EC002637
EC002638
27-44-03-09
E60693
600 V
60 A
5A
AWG 4
Packing
Packaging
VPE width
Classifications
ETIM 3.0
ETIM 5.0
eClass 6.2
eClass 9.1
Notes
Notes
• Additional colours on request
• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule with plastic collar to DIN 46228/4
• Wire end ferrule without plastic collar to DIN 46228/1
• P on drawing = pitch
• Rated data refer only to the component itself. Clearance and creepage distances to other components are to
be designed in accordance with the relevant application standards.
• MFX and MSFX: X= Position of the middle flange e.g. MF2, MSF3
IPC conformity
• For all applications with flange we recommend to fix the pin header with the help of the soldering flange or a
self-tapping screw on the board.
Conformity: The products are developed, manufactured and delivered according international recognized
standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties
in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request.
Approvals
Approvals
ROHS
Conform
Creation date June 12, 2019 9:26:50 PM CEST
Catalogue status 07.06.2019 / We reserve the right to make technical changes.
4
Data sheet
OMNIMATE Power - series BU/SU 10.16IT
BUZ 10.16IT/04/180MF3 AG BK BX
Technical data
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Downloads
Brochure/Catalogue
Engineering Data
Motion controllers white paper
User Documentation
White Paper UL 600 V
FL DRIVES EN
MB DEVICE MANUF. EN
FL DRIVES DE
FL HEATING ELECTR EN
FL APPL_INVERTER EN
FL_BASE_STATION_EN
FL ELEVATOR EN
FL POWER SUPPLY EN
FL 72H SAMPLE SER EN
PO OMNIMATE EN
STEP
Download Whitepaper
QR-Code product handling video
Download Whitepaper
Creation date June 12, 2019 9:26:50 PM CEST
Catalogue status 07.06.2019 / We reserve the right to make technical changes.
5
Data sheet
OMNIMATE Power - series BU/SU 10.16IT
BUZ 10.16IT/04/180MF3 AG BK BX
Drawings
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Dimensional drawing
Connection diagram
Graph
Graph
Creation date June 12, 2019 9:26:50 PM CEST
Catalogue status 07.06.2019 / We reserve the right to make technical changes.
6