2025530000

    Data sheet VPU series VPU II 3W WYE 277V Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Weidmüller VPU I (Type I), VPU II (Type II) and VPU III (Type III) surge protection products effectively reduce the interference coupling that can occur from transient surge voltages, even significantly below the limits prescribed by insulation co-ordination according to EN 60664-3 / DIN VDE 0110. This means that the whole installation is exposed to fewer malfunctions. The arrestors are co-ordinated using technical means. This means that decoupling between types I, II and III is not necessary. The arrestors are tested according to product standard IEC 61643-11 / DIN EN 61643-11 and can be installed in systems according to IEC 61643-12 / VDE V0675-6-12 and IEC 62305-4 / VDE 0185-4. This lightning and surge protection device is suited for installation in power supply systems for the US market in accordance with UL 1449 Ed.4. Weidmüller offers different products depending on the particular mains network type and voltage level. General ordering data   Type Order No. Version GTIN (EAN) Qty.   VPU II 3W WYE 277V 2025530000 Surge voltage arrester, Low voltage, without telecomm. contact, TN-C (U0≤ 230/400 V) 4050118405224 1 pc(s). Creation date August 7, 2018 6:55:33 PM CEST   Catalogue status 27.07.2018 / We reserve the right to make technical changes. 1     Data sheet VPU series VPU II 3W WYE 277V   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Mounting dimension - height   54 mm 94 mm 69 mm 75 mm         Width (inches) Height (inches) Depth (inches) Net weight 2.126 inch 3.701 inch 2.717 inch 412 g 5 - 95% rel. humidity -40 °C -40 °C -40 °C...85 °C         Operating temperature, max. Storage temperature, max. Operating temperature   70 °C 85 °C -40 °C...70 °C   Design   Optical function display     Segment Version Installation housing; 3TE, Insta IP 20 green = OK; red = arrester is defective - replace Power distribution without telecomm. contact   Surge voltage category III     Discharge current In (8/20µs) wire-PE Frequency range, max. 20 kA   Fuse       No. of poles Rated voltage (AC) Requirements class, acc. to EN 61643-11 Short-circuit current rating ISCCR low voltage network Temperatures   Humidity Operating temperature, min. Storage temperature, min. Storage temperature   General data   Colour Mounting rail Protection degree UL 94 flammability rating   Black, Orange TS 35 IP20 V-0 Insulation coordination acc. to EN 50178   Pollution severity   2 Rated data IEC / EN   Discharge current Imax (8/20µs) wire-PE 40 kA Follow-on current extinguishing Not available due for capability Ifi technical reasons Frequency range, min. 50 Hz Max. continuous voltage, Uc (AC) 385 V Protection level Up at IN (L/N-PE) ≤ 1,85 kV Requirements category acc. to IEC 61643-11 Type II Response time ≤ 25 ns Voltage type AC       60 Hz 125 A gL (if back-up fuse > 125 A) 3 230 V T2 25 kA TN-C (U0≤ 230/400 V) Connection data   Type of connection Screw connection Tightening torque, min. 2 Nm Wire connection cross section AWG, min. AWG 14 Wire cross-section, solid, min. 4 mm² Wire connection cross-section, finely stranded, min. 2.5 mm² Conductor cross-section, flexible, AEH (DIN 46228-1), min. 2.5 mm² Connection cross-section, stranded, min. 4 mm²                 Stripping length, rated connection Tightening torque, max. Wire connection cross section AWG, max. Wire cross-section, solid, max. Wire connection cross section, finely stranded, max. Conductor cross-section, flexible, AEH (DIN 46228-1), max. Connection cross-section, stranded, max. 15 mm 3 Nm AWG 0 16 mm² 25 mm² 25 mm² 50 mm² Creation date August 7, 2018 6:55:33 PM CEST   Catalogue status 27.07.2018 / We reserve the right to make technical changes. 2     Data sheet VPU series VPU II 3W WYE 277V   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rated data UL   Continuous voltage UC, max. Test Voltage 39.1 (UL 1449) MCOV (L/N-PE) In   385 V 480 V 385 Vac 20 kA         Rated Voltage UN VPR (L/N-PE) SCCR Category 277 V 1,500 V 200 kA SPD TYPE 1CA/2CA Ratings IECEx/ATEX/cUL   cUL certificate   UL 1449 ED.4 Certificate     Classifications   ETIM 3.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   EC000941 EC000941 27-13-08-01 27-14-02-01 27-14-02-01           ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1 EC000510 30-21-19-21 27-13-08-02 27-14-02-01 27-13-08-05 Product information   Descriptive text accessories   Pluggable spare arrester VPU II 0 385V - 2025100000 Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Engineering Data User Documentation   CE PAPER STEP Instruction sheet Creation date August 7, 2018 6:55:33 PM CEST   Catalogue status 27.07.2018 / We reserve the right to make technical changes. 3     Data sheet VPU series VPU II 3W WYE 277V   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Electric symbol Schematic circuit diagram UL Schematic circuit diagram IEC / EN Creation date August 7, 2018 6:55:33 PM CEST   Catalogue status 27.07.2018 / We reserve the right to make technical changes. 4