2051500000

    Data sheet A-series A4C 4 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Spring connection with PUSH IN Technology The innovative PUSH IN technology reduces the amount of time you spend on wiring to a minimum. Direct insertion guarantees high conductor pull-out forces and simple handling for all conductor types. General ordering data   Type Order No. Version GTIN (EAN) Qty.   A4C 4 2051500000 Feed-through terminal, PUSH IN, 4 mm², 800 V, 32 A, Dark Beige 4050118411621 50 pc(s). Creation date January 26, 2018 7:28:33 PM CET   Catalogue status 12.01.2018 / We reserve the right to make technical changes. 1     Data sheet A-series A4C 4   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   6.1 mm 87.5 mm 39.5 mm 40.5 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.24 inch 3.445 inch 1.555 inch 15.06 g -60 °C   Continuous operating temp., max. 130 °C Wemid Orange     Colour UL 94 flammability rating Dark Beige V-0 TÜV16ATEX7909U 550 V 4 mm² 28 A         Certificate No. (IECEX) Current (ATEX) Max. voltage (IECEX) Wire cross section max. (IECEX) IECEXTUR16.0036U 28 A 550 V 4 mm² Yes 1 1 TS 35 No           Number of potentials No. of clamping points per level PE connection N-function PEN function 1 4 No No No Mounting rail No TS 35       Open sides Type of fixing With snap-in pegs right Snap-on No 200039-70089609 30 A 600 V 600 V 26 AWG           Current size B (CSA) Current size D (CSA) Voltage size C (CSA) Wire cross section max. (CSA)   30 A 5A 600 V 10 AWG Temperatures   Continuous operating temp., min.   Material data   Material Colour of operational elements   Rating data IECEx/ATEX   Certificate No. (ATEX) Max. voltage (ATEX) Wire cross section max. (ATEX) Current (IECEX)   System specifications   End cover plate required Number of levels Number of potentials per tier Mounting rail PE function   Additional technical data   Installation advice Snap-on Type of mounting   CSA rating data   Certificate No. (CSA) Current size C (CSA) Voltage size B (CSA) Voltage size D (CSA) Wire cross section min. (CSA)   Creation date January 26, 2018 7:28:33 PM CET   Catalogue status 12.01.2018 / We reserve the right to make technical changes. 2     Data sheet A-series A4C 4   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, rated connection, min. Cross-section for connected conductor, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, min. Number of connections Twin wire-end ferrules, max. Type of connection Wire connection cross section AWG, min. 0.6 x 3.5 mm 0.5 mm² 0.5 mm² 4 1.5 mm² PUSH IN AWG 26 Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, min. 0.5 mm² Wire connection cross section, solid core max. rated connection 4 mm² Wire connection cross section, stranded, rated connection, max. 4 mm² Wire connection cross-section, finely stranded with wire-end ferrules and plastic collars DIN 46228/4, rated connection, max. 4 mm²       Clamping range, rated connection, max. 4 mm² Connection direction top Gauge to IEC 60947-1       Stripping length Twin wire-end ferrules, min. Wire connection cross section AWG, max. Wire connection cross section, finely stranded with wire-end ferrules DIN 46228/1, rated connection, max. Wire connection cross section, finely stranded, max.           A4 12 mm 0.5 mm² AWG 12 4 mm² 4 mm² Wire connection cross section, solid core, min. rated connection 0.5 mm² Wire connection cross section, stranded, rated connection, min. 0.5 mm² Wire connection cross-section, finely stranded, min. 0.5 mm²   Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage Surge voltage category   4 mm² 32 A IEC 60947-7-1 8 kV III           Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity   800 V 32 A 1 mΩ 3 UL rating data   Certificate No. (cURus) E60693 Conductor size Factory wiring min. (cURus) 28 AWG Conductor size Field wiring min. (cURus) 28 AWG Current size C (cURus) 30 A Voltage size B (cURus) 600 V Voltage size D (cURus) 600 V           Conductor size Factory wiring max. (cURus) 10 AWG Conductor size Field wiring max. (cURus) 10 AWG Current size B (cURus) 30 A Current size D (cURus) 5A Voltage size C (cURus) 600 V           ETIM 6.0 eClass 7.1 eClass 9.0       Classifications   ETIM 5.0 eClass 6.2 eClass 8.1 eClass 9.1   EC000897 27-14-11-20 27-14-11-20 27-14-11-20 EC000897 27-14-11-20 27-14-11-20 Product information   Descriptive text technical data Descriptive text accessories   Approval in progress All MultiMark variants (MM) = strip markers Creation date January 26, 2018 7:28:33 PM CET   Catalogue status 12.01.2018 / We reserve the right to make technical changes. 3     Data sheet A-series A4C 4   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals   Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data User Documentation   Attestation of Conformity ATEX Certificate IECEx Certificate DE_PT0101_20160614_065_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S NTI NTI Safety note   Safety notice   Safety Information Creation date January 26, 2018 7:28:33 PM CET   Catalogue status 12.01.2018 / We reserve the right to make technical changes. 4     Data sheet A-series A4C 4   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date January 26, 2018 7:28:33 PM CET   Catalogue status 12.01.2018 / We reserve the right to make technical changes. 5