2466970000

    Data sheet PROtop PRO TOP1 72W 24V 3A CO Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     High-end power supplies must perform efficiently and reliably, even in challenging industrial environments. This requires high power reserves, a long service life and optimal protection against overvoltage, vibration and extreme temperature conditions. New DCL technology gives PROtop an outstanding dynamic range. This can be used for the reliable triggering of circuit breakers or for powerful motor starts. General ordering data   Type Order No. Version GTIN (EAN) Qty.   PRO TOP1 72W 24V 3A CO 2466970000 Power supply, switch-mode power supply unit, 24 V 4050118481570 1 pc(s). Creation date January 17, 2019 9:24:36 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 1     Data sheet PROtop PRO TOP1 72W 24V 3A CO   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Net weight   35 mm 130 mm 125 mm 650 g         Width (inches) Height (inches) Depth (inches)   5...100 % no condensation -40 °C -40 °C -40 °C...85 °C   Operating temperature, max.       Storage temperature, max. Operating temperature   Lead 7439-92-1     85…277 V AC 80 ... 410 V DC 45…65 Hz         Connection system Dielectric strength Input fuse (internal) Rated input voltage       Connection system   Output power         Output voltage Protection against inverse voltage Rated (nominal) output current @ UNom Reserve capacity @ URated   Triggerable circuit breakers 1.378 inch 5.118 inch 4.921 inch Temperatures   Humidity at operating temperature Operating temperature, min. Storage temperature, min. Storage temperature   70 °C 85 °C -40 °C...70 °C Environmental Product Compliance   REACH SVHC   Input   AC input voltage range DC input voltage range Frequency range AC Inrush current Surge protection   max. 5 A Varistor Clamping yoke max. 300 V AC ≤ 15 s Yes 100 - 240 V AC / 120 340 V DC output   DCL - peak load reserve Mains failure bridge-over time Output voltage Parallel connection option Ramp-up time Rated output voltage Residual ripple, breaking spikes   150 % (5 s); 400 % (15 ms) > 20 ms @ 115V AC/ 230 VAC 24 V Passive Current Sharing ≤ 100 ms 24 V DC ± 1 % < 50 mVss @ UNenn, Full Load Clamping yoke connection 72 W 22.5...29 V Yes 3 A @ 60 °C 130% permanent at ≤ 40°C B2 Creation date January 17, 2019 9:24:36 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 2     Data sheet PROtop PRO TOP1 72W 24V 3A CO   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data General data   AC failure bridging time @ INom Degree of efficiency Earth leakage current, max. MTBF Operating temperature Power loss, idling Protection degree Short-circuit protection   > 20 ms @ 230 V AC / > 20 ms @ 115 V AC 89% 3.5 mA > 1.000.000 h according IEC 1709 (SN29500) -40 °C...70 °C 5W IP20 Yes, internal   Conformal coating       Derating Housing version Mounting position, installation notice         Power factor (approx.) Power loss, nominal load Series switching capability Surge voltage category   Vibration resistance IEC 60068-2-6   Shock resistance IEC 60068-2-27 Yes > 60°C (2.5% / 1°C) Metal, corrosion resistant Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring active subassemblies with full load, 5 mm with passive neighbouring subassemblies, direct row mounting with 90% rated load > 0.5 8.9 W Yes III EMC / shock / vibration   Noise emission in accordance with EN55032 Interference immunity test acc. to   Class B EN 55032:2015, EN 55024:2010/A1:2015, EN 55035:2017, EN 61000-3-2:2014, EN 61000-6-1:2007, EN 61000-6-2:2005, EN 61000-6-3:2007/ A1:2011, EN 61000-6-4:2007/ A1:2011 2.3 g (on DIN rail), 4 g (with direct mounting) 30 g in all directions Insulation coordination   Class of protection Insulation voltage input / earth Insulation voltage, input/output Surge voltage category   I, with PE connection 4 kV 4 kV III   Humidity at operating temperature       Insulation voltage output / earth Pollution severity     For use with electronic equipment   Protective separation / protection against electrical shock Safety transformers for switch-mode power supplies 5...100 % no condensation 0.5 kV 2 Electrical safety (applied standards)   Electrical machine equipment Protection against dangerous shock currents Safety extra-low voltage   Acc. to EN60204 Acc. to VDE0106-101 SELV acc. to EN60950, PELV acc. to EN60204   Acc. to EN50178 / VDE0160 VDE0100-410 / acc. to DIN57100-410 nach EN61558-2-16 Creation date January 17, 2019 9:24:36 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 3     Data sheet PROtop PRO TOP1 72W 24V 3A CO   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Connection data (input)   Conductor cross-section, AWG/kcmil , max. Conductor cross-section, flexible , min. Conductor cross-section, rigid , min. Number of terminals Wire connection cross section, flexible (input), max.             Conductor cross-section, AWG/kcmil , min. Conductor cross-section, rigid , max. Connection system Screwdriver blade   30 4 mm² Clamping yoke 0.6 x 3.5   12   4 mm²   4 mm² Clamping yoke connection     0.6 x 3.5 Conductor cross-section, AWG/kcmil , min. Conductor cross-section, flexible , min. Conductor cross-section, rigid , min. Number of terminals   30 0.2 mm² 0.2 mm² 5 (+ + / - - -)   Wire connection cross-section, flexible (signal), min. Wire cross-section, AWG/kcmil , min. Wire cross-section, solid , min. 12 0.2 mm² 0.2 mm² 3 for L/N/PE 4 mm² Connection data (output)   Conductor cross-section, AWG/kcmil , max. Conductor cross-section, flexible , max. Conductor cross-section, rigid , max. Connection system Screwdriver blade   Connection data (signal)   Wire connection cross-section, flexible (signal), max. Wire cross-section, AWG/kcmil , max. Wire cross-section, solid , max.   1.5 mm² 16 1.5 mm²     0.2 mm² 28 0.2 mm² Signalling   LED green/red   Green: Operation (failure-   free), Flashing green: advance warning I>90%, Green/red flashing: output switched off (switchoff mode), Flashing red: overload/error   Classifications   ETIM 6.0 eClass 9.1   EC002540 27-04-07-01     eClass 6.2   27-04-90-04 Approvals   ROHS   Conform Creation date January 17, 2019 9:24:36 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 4     Data sheet PROtop PRO TOP1 72W 24V 3A CO   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date January 17, 2019 9:24:36 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 5