2473010000

    Data sheet OMNIMATE Power - series LL LLFS 7.50/03/90V 5.0SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image The sturdy, direct connection for extreme current and voltage requirements in all power electronics applications such as solar inverters, frequency converters, servo-controllers and power supplies. General ordering data   Type Order No. Version GTIN (EAN) Qty. Product data Packaging   LLFS 7.50/03/90V 5.0SN BK BX 2473010000 Printed circuit board terminals, 7.50 mm, No. of poles: 3, 90°, Solder pin length (l): 5 mm, tinned, black, PUSH IN without actuator, Clamping range, max. : 6 mm², Box 4050118658132 80 pc(s). IEC: 1000 V / 41 A / 0.5 - 6 mm² UL: 600 V / 37 A / AWG 24 - AWG 8 Box Creation date September 4, 2019 6:52:35 PM CEST   Catalogue status 30.08.2019 / We reserve the right to make technical changes. 1     Data sheet OMNIMATE Power - series LL LLFS 7.50/03/90V 5.0SN BK BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Height of lowest version Depth (inches)   23.5 mm 30.56 mm 25.56 mm 0.789 inch         Width (inches) Height (inches) Depth Net weight OMNIMATE Power - series LL THT solder connection 7.5 mm 3 5 mm 2 mm 1 15 mm   Wire connection method 0.925 inch 1.203 inch 20.05 mm 12.425 g System parameters   Product family Mounting onto the PCB Pitch in mm (P) No. of poles Solder pin length (l) Solder eyelet hole diameter (D) Number of solder pins per pole L1 in mm Touch-safe protection acc. to DIN VDE 0470   IP 20                 PUSH IN without actuator Conductor outlet direction 90° Pitch in inches (P) 0.295 inch Fitted by customer No Solder pin dimensions d = 1.5 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm Stripping length 12 mm L1 in inches 0.59 inch Touch-safe protection acc. to DIN VDE 57 106 Safe from finger touch       Colour Insulating material group UL 94 flammability rating Material data   Insulating material Colour chart (similar) Insulation strength Contact material Layer structure of solder connection Storage temperature, max. Operating temperature, min.   Wemid (PA) RAL 9011 ≥ 108 Ω E-Cu 4-10 µ Sn matt 85 °C -40 °C         Contact surface Storage temperature, min. Max. relative humidity during storage Operating temperature, max. black I V-0 tinned -40 °C 80 % 120 °C Conductors suitable for connection   Clamping range, min. 0.25 mm² Clamping range, max. 6 mm² Solid, min. H05(07) V-U 0.5 mm² Solid, max. H05(07) V-U 6 mm² Flexible, min. H05(07) V-K 0.5 mm² Flexible, max. H05(07) V-K 6 mm² w. plastic collar ferrule, DIN 46228 pt 4, 0.25 mm² min. w. plastic collar ferrule, DIN 46228 pt 4, 6 mm² max. w. wire end ferrule, DIN 46228 pt 1, min0.25 mm² w. wire end ferrule, DIN 46228 pt 1, 6 mm² max. Creation date September 4, 2019 6:52:35 PM CEST   Catalogue status 30.08.2019 / We reserve the right to make technical changes. 2     Data sheet OMNIMATE Power - series LL LLFS 7.50/03/90V 5.0SN BK BX   Technical data Clampable conductor Cross-section for conductor connection wire end ferrule Cross-section for conductor connection wire end ferrule Cross-section for conductor connection wire end ferrule Cross-section for conductor connection wire end ferrule Cross-section for conductor connection wire end ferrule Cross-section for conductor connection wire end ferrule Cross-section for conductor connection wire end ferrule Cross-section for conductor connection wire end ferrule Max. clamping range   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com 6 mm² Type nominal Stripping length Recommended wireend ferrule Type nominal Stripping length Recommended wireend ferrule Type nominal Stripping length Recommended wireend ferrule Stripping length Recommended wireend ferrule Type nominal Stripping length Recommended wireend ferrule Type nominal Stripping length Recommended wireend ferrule Stripping length Recommended wireend ferrule Type nominal Stripping length Recommended wireend ferrule Stripping length Recommended wireend ferrule Type nominal Stripping length Recommended wireend ferrule Stripping length Recommended wireend ferrule Type nominal Stripping length Recommended wireend ferrule fine-wired 0.5 mm² nominal 14 mm 1076980000 fine-wired 1 mm² nominal 15 mm 9025930000 fine-wired 1.5 mm² nominal 15 mm 9019140000 nominal 12 mm 9004060000 fine-wired 0.75 mm² nominal 14 mm 9025910000 fine-wired 2.5 mm² nominal 14 mm 9019170000 nominal 12 mm 0186100000 fine-wired 4 mm² nominal 12 mm 0244100000 nominal 14 mm 9019200000 fine-wired 6 mm² nominal 14 mm 0533500000 nominal 12 mm 0191900000 fine-wired 10 mm² nominal 12 mm 0282900000 Creation date September 4, 2019 6:52:35 PM CEST   Catalogue status 30.08.2019 / We reserve the right to make technical changes. 3     Data sheet OMNIMATE Power - series LL LLFS 7.50/03/90V 5.0SN BK BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rated data acc. to IEC   tested acc. to standard Rated current, max. no. of poles (Tu=20°C) Rated current, max. no. of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree III/2 Rated impulse voltage for surge voltage class/ pollution degree II/2 Rated impulse voltage for surge voltage class/ contamination degree III/3   In accordance with IEC 60947-7-1     Rated current, min. no. of poles (Tu=20°C) Rated current, min. no. of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree II/2 Rated voltage for surge voltage class / pollution degree III/3 Rated impulse voltage for surge voltage class/ pollution degree III/2           Rated voltage (Use group C / CSA) Rated current (Use group B / CSA) Rated current (Use group D / CSA) Wire cross-section, AWG, max.   Certificate No. (cURus) 600 V 600 V 37 A AWG 24 Specifications are maximum values, details see approval certificate.           Rated voltage (Use group C / UL 1059) Rated current (Use group B / UL 1059) Rated current (Use group D / UL 1059) Wire cross-section, AWG, max.   Box 210 mm     VPE length VPE height 220 mm 50 mm EC001284 EC002643 27-26-11-01 27-44-04-01         ETIM 4.0 ETIM 6.0 eClass 9.0   EC002643 EC002643 27-44-04-01 34 A 29 A 1,000 V 8 kV 8 kV         41 A 37 A 1,000 V 1,000 V 8 kV Rated data acc. to CSA   Rated voltage (Use group B / CSA) Rated voltage (Use group D / CSA) Rated current (Use group C / CSA) Wire cross-section, AWG, min.   600 V 600 V 37 A AWG 24 600 V 37 A 5A AWG 8 Rated data acc. to UL 1059   Institute (cURus) Rated voltage (Use group B / UL 1059) Rated voltage (Use group D / UL 1059) Rated current (Use group C / UL 1059) Wire cross-section, AWG, min. Reference to approval values   E60693 600 V 37 A 5A AWG 8 Packing   Packaging VPE width   Classifications   ETIM 3.0 ETIM 5.0 eClass 6.2 eClass 9.1   Creation date September 4, 2019 6:52:35 PM CEST   Catalogue status 30.08.2019 / We reserve the right to make technical changes. 4     Data sheet OMNIMATE Power - series LL LLFS 7.50/03/90V 5.0SN BK BX   Technical data Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Notes   Notes • Additional colours on request • Rated current related to rated cross-section & min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228/1 • Wire end ferrule with plastic collar to DIN 46228/4 • P on drawing = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. IPC conformity   • The test point can only be used as potential-pickup point. Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. Approvals   Approvals   Downloads   Approval/Certificate/Document of Conformity Engineering Data Motion controllers white paper White Paper UL 600 V   Declaration of the Manufacturer STEP STEP Download Whitepaper Download Whitepaper Creation date September 4, 2019 6:52:35 PM CEST   Catalogue status 30.08.2019 / We reserve the right to make technical changes. 5     Data sheet OMNIMATE Power - series LL LLFS 7.50/03/90V 5.0SN BK BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Dimensional drawing Derating curve Derating curve Product benefits Product benefits Power up to UL 600 V Offset solder pins Tool-free wiring Top contact security Creation date September 4, 2019 6:52:35 PM CEST   Catalogue status 30.08.2019 / We reserve the right to make technical changes. 6 Wave Solder Profile   Recommended wave solderding profiles Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com   Single Wave:   260 Contact time appr. 3 sec. 260 °C 255 °C 250 °C 240 220 200 Temperature [°C] 180 160 140 appr. 150 °C Preheating 120 100 Cooling rate < 6 °K/s 80 60 Typical process Prozess limits Temperature on board 40 Heating rate < 3 °K/s 20 0 0 20 40 60 80 100 120 time [s] 140 160 180 200 220 240 Double Wave: 255 °C Total contact time max. 10 sec. 260 240 260 °C 250 °C 220 200 Temperature [°C] 180 160 140 appr. 150°C Preheating 120 100 Cooling rate < 6 °K/s 80 60 Typical process Process limits Temperature on board 40 Heating rate < 3 °K/s 20 0 0 20 40 60 Wave soldering profiles 80 100 120 time [s] 140 160 180 200 220 240 Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are qualified. When choosing a suitable profile for your application, the following factors also need to be considered: - PCB thickness - Proportion of Cu in the layers - Single/double-sided assembly - Product range - Heating and cooling rates The single and double wave profiles each indicate the recommended operating range, including the maximum soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above maximum profile.   We reserve the right to make technical changes.