2476910000

    Data sheet D-SERIES DRI DRIKIT 110VDC 2CO LD/PB Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Similar to illustration Our relay kits are particularly convenient to use. The kits are delivered fully assembled and 100 % function-tested. This saves assembly time and reduces the number of parts required. • Assembled kit consisting of relay, base and retaining clip, incl. label • 100% function-tested • 100% control of the dielectric strength input - output • Optional: test button with coloured control voltage marking (AC coil: red / DC coil: blue) and mechanical switch position indicator • Bright status LED (AC coil: red / DC coil: green) General ordering data   Type Order No. Version GTIN (EAN) Qty.   DRIKIT 110VDC 2CO LD/PB 2476910000 D-SERIES DRI, Relay module, No. of contacts: 2 CO contact with test button AgNi, Rated control voltage: 110 V DC, Continuous current: 5 A, Screw connection 4050118497137 10 pc(s). Creation date January 18, 2019 5:13:43 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 1     Data sheet D-SERIES DRI DRIKIT 110VDC 2CO LD/PB   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Net weight   15.8 mm 80.2 mm 68 mm 64 g         Width (inches) Height (inches) Depth (inches)   35...85 % rel. humidity, no condensation -40 °C -40 °C -40 °C...85 °C   Operating temperature, max.       Storage temperature, max. Operating temperature   Lead 7439-92-1     110 V DC 530 mW 22800 Ω ± 10 % Free-wheel diode         Rated current DC Pull-in/drop-out voltage, typ. Status indicator   4,8 mA 82.5 V / 16.5 V DC Green LED 250 V AC 250 V 1250 VA ≤ 15 ms 10 mA @ 12 V, 100 mA @ 5V           Max. switching voltage, AC Continuous current DC switching capacity (resistive), max. Switch-off delay Max. switching frequency at rated load 250 V 5A 150 W @ 24 V ≤ 10 ms 2 CO contact with test button (AgNi)   Mechanical service life TS 35 Yes     Test button Colour yes (lockable) Black         Surge voltage category Insulating material group Dielectric strength input – output Dielectric strength of neighbouring contacts Impulse withstand voltage III IIIb 4 kVeff / 1 min 0.622 inch 3.157 inch 2.677 inch Temperatures   Humidity Operating temperature, min. Storage temperature, min. Storage temperature   55 °C 85 °C -40 °C...55 °C Environmental Product Compliance   REACH SVHC   Input   Rated control voltage Power rating Coil resistance Protective circuit   Output   Rated switching voltage Max. switching voltage, DC AC switching capacity (resistive), max. Switch-on delay Min. switching power   0.1 Hz Contact data   Contact type   10 x 106 switching cycles General data   Mounting rail Mechanical switch position indicator   Insulation coordination   Rated voltage 250 V Pollution severity 2 Protection degree IP20 Creepage and clearance distance input – output ≥ 3 mm Dielectric strength of open contact 1 kVeff / 1 min     1.5 kVeff / 1 min. 4.8 kV (1.2/50 µs) Creation date January 18, 2019 5:13:43 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 2     Data sheet D-SERIES DRI DRIKIT 110VDC 2CO LD/PB   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Further details of approvals / standards   Standards Certificate no. (cURus) base   IEC 61810-1, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011 E355547   Certificate no. (cURus) relay     Screw connection 0.5 Nm 1.5 mm² 4 mm²           Stripping length, rated connection Tightening torque, max. Clamping range, min. Wire cross-section, solid, min. Wire connection cross-section, finely stranded, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Conductor cross-section, flexible, AEH (DIN 46228-1), min. E312083 Connection data   Wire connection method Tightening torque, min. Clamping range, rated connection Clamping range, max. Wire cross-section, solid, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Conductor cross-section, flexible, AEH (DIN 46228-1), max. Gauge to IEC 60947-1   4 mm² 4 mm² 4 mm² 4 mm² A3       Blade size         eClass 6.2   8 mm 0.8 Nm 0.25 mm² 0.25 mm² 0.25 mm² 0.25 mm² 0.25 mm² size PH1 Classifications   ETIM 6.0 eClass 9.1   EC001437 27-37-16-01 27-37-16-01 Approvals   Approvals   Downloads   Approval/Certificate/Document of Conformity Engineering Data Engineering Data   DE_PA5600_160822_001.pdf EPLAN, WSCAD, Zuken E3.S STEP Creation date January 18, 2019 5:13:43 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 3     Data sheet D-SERIES DRI DRIKIT 110VDC 2CO LD/PB   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Wiring diagram Graph Graph Graph Electrical service life DC load limit curve Resistive load DC operational voltage range Dimensional drawing Creation date January 18, 2019 5:13:43 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 4     Data sheet D-SERIES DRI DRIKIT 110VDC 2CO LD/PB   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Miscellaneous Type codes Creation date January 18, 2019 5:13:43 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 5