2484800000

    Data sheet OMNIMATE Power - series WGK VWGK 6 GY BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image The V versions of the WGK feed-through terminals with an insulated housing and clamping yoke connections on the external side, and a solder connection on the internal side for use in encapsulated devices (e.g. EMC filters). General ordering data   Type Order No. Version GTIN (EAN) Qty. Product data Packaging   VWGK 6 GY BX 2484800000 OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 6 mm², Wemid (PA), Direct mounting, Feed-through (bushing) 4050118520460 50 pc(s). IEC: 500 V / 41 A / 0.5 - 10 mm² UL: 300 V / 50 A / AWG 22 - AWG 10 Box Creation date June 12, 2019 8:52:49 PM CEST   Catalogue status 07.06.2019 / We reserve the right to make technical changes. 1     Data sheet OMNIMATE Power - series WGK VWGK 6 GY BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Width Height Height of lowest version   15.5 mm 10 mm 31.5 mm 31.5 mm         Length (inches) Width (inches) Height (inches) Net weight OMNIMATE Power - series WGK 180° 0.8 x 4.0 1.8 Nm   Wire connection method         Fitted by customer Tightening torque, min. Clamping screw Touch-safe protection acc. to DIN VDE 0470               Colour UL 94 flammability rating Contact surface Storage temperature, max. Operating temperature, min. Temperature range, installation, min.   0.61 inch 0.394 inch 1.24 inch 7.1 g System parameters   Product family Conductor outlet direction Screwdriver blade Tightening torque, max. Stripping length   13 mm Screw / solder connection No 0.8 Nm M 3.5 IP 20 Material data   Insulating material Colour chart (similar) Contact material Storage temperature, min. Max. relative humidity during storage Operating temperature, max. Temperature range, installation, max.   Wemid (PA) RAL 7035 E-Cu -25 °C 80 % 120 °C 120 °C grey V-0 tinned 55 °C -50 °C -25 °C Conductors suitable for connection   Clamping range, min. 0.5 mm² Clamping range, max. 10 mm² Wire connection cross section AWG, AWG 22 min. Wire connection cross section AWG, AWG 10 max. Solid, min. H05(07) V-U 0.5 mm² Solid, max. H05(07) V-U 10 mm² Stranded, max. H07V-R 6 mm² Flexible, min. H05(07) V-K 0.5 mm² Flexible, max. H05(07) V-K 6 mm² w. wire end ferrule, DIN 46228 pt 1, min0.5 mm² w. wire end ferrule, DIN 46228 pt 1, 6 mm² max. Clampable conductor Cross-section for conductor connection AEH Cross-section for conductor connection AEH Cross-section for conductor connection AEH Cross-section for conductor connection Max. clamping range   AEH 10 mm² Type nominal Stripping length Type nominal Stripping length Type nominal Stripping length Type nominal Stripping length fine-wired 2.5 mm² nominal fine-wired 4 mm² nominal fine-wired 6 mm² nominal fine-wired 1.5 mm² nominal 12 mm 12 mm 12 mm 12 mm Creation date June 12, 2019 8:52:49 PM CEST   Catalogue status 07.06.2019 / We reserve the right to make technical changes. 2     Data sheet OMNIMATE Power - series WGK VWGK 6 GY BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rated data acc. to IEC   tested acc. to standard     Rated current, min. no. of poles (Tu=20°C) Rated voltage for surge voltage class / pollution degree III/3   300 V 300 V 50 A AWG 22         Rated voltage (Use group C / CSA) Rated current (Use group B / CSA) Rated current (Use group D / CSA) Wire cross-section, AWG, max. 300 V 50 A 10 A AWG 10 300 V 300 V 50 A AWG 22         Rated voltage (Use group C / UL 1059) Rated current (Use group B / UL 1059) Rated current (Use group D / UL 1059) Wire cross-section, AWG, max. 300 V 50 A 10 A AWG 10 Box 0m     VPE length VPE height 0m 0m EC001283 27-14-11-34     eClass 6.2 eClass 9.1 27-14-11-34 27-14-11-34 IEC 60664-1, IEC 61984 Rated current, max. no. of poles (Tu=20°C) 41 A Rated impulse voltage for surge voltage class/ contamination degree III/3 6 kV   41 A 500 V   Rated data acc. to CSA   Rated voltage (Use group B / CSA) Rated voltage (Use group D / CSA) Rated current (Use group C / CSA) Wire cross-section, AWG, min.   Rated data acc. to UL 1059   Rated voltage (Use group B / UL 1059) Rated voltage (Use group D / UL 1059) Rated current (Use group C / UL 1059) Wire cross-section, AWG, min.   Packing   Packaging VPE width   Classifications   ETIM 6.0 eClass 9.0   Notes   Notes • Clearance and creepage distances to other components must be devised in accordance with the relevant application standard. This can be achieved in the device by full encapsulation or by the use of additional spacer plates. • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. • Colours: SW = black; GN/YL = green/yellow; GY = grey • Additional colours on request   • VWGK: Rated voltage plastic walls: 1 - 4 mm = 500 V; metal walls: 1 - 4 mm = 500 V Approvals   ROHS   Conform Downloads   Approval/Certificate/Document of Conformity   Declaration of the Manufacturer Creation date June 12, 2019 8:52:49 PM CEST   Catalogue status 07.06.2019 / We reserve the right to make technical changes. 3     Data sheet OMNIMATE Power - series WGK VWGK 6 GY BX   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Dimensional drawing Creation date June 12, 2019 8:52:49 PM CEST   Catalogue status 07.06.2019 / We reserve the right to make technical changes. 4