2576150000

    Data sheet D-SERIES DRI DRIKITP230VAC 2CO LD/PB Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Similar to illustration Our relay kits are particularly convenient to use. The kits are delivered fully assembled and 100 % function-tested. This saves assembly time and reduces the number of parts required. • Assembled kit consisting of relay, base and retaining clip, incl. label • 100% function-tested • 100% control of the dielectric strength input - output • Optional: test button with coloured control voltage marking (AC coil: red / DC coil: blue) and mechanical switch position indicator • Bright status LED (AC coil: red / DC coil: green) General ordering data   Type Order No. Version GTIN (EAN) Qty.   DRIKITP230VAC 2CO LD/PB 2576150000 D-SERIES DRI, Relay module, No. of contacts: 2 CO contact with test button AgNi, Rated control voltage: 230 V AC, Continuous current: 5 A, PUSH IN with actuator 4050118585919 10 pc(s). Creation date January 18, 2019 6:17:59 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 1     Data sheet D-SERIES DRI DRIKITP230VAC 2CO LD/PB   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Net weight   15.9 mm 102.1 mm 63 mm 59.97 g         Width (inches) Height (inches) Depth (inches)   35...85 % rel. humidity, no condensation -40 °C -40 °C -40 °C...85 °C   Operating temperature, max.       Storage temperature, max. Operating temperature   Lead 7439-92-1     230 V AC 1.1 VA 23500 Ω ± 10 %       Rated current AC Pull-in/drop-out voltage, typ. Status indicator 4,9 mA 184 V / 69 V AC Red LED 250 V AC 250 V 1250 VA ≤ 15 ms 10 mA @ 12 V, 100 mA @ 5V           Max. switching voltage, AC Continuous current DC switching capacity (resistive), max. Switch-off delay Max. switching frequency at rated load 250 V 5A 150 W @ 24 V ≤ 10 ms 2 CO contact with test button (AgNi)   Mechanical service life TS 35 Yes     Test button Colour yes (lockable) Black         III IIIb 5 kVeff / 1min   Surge voltage category Insulating material group Dielectric strength input – output Dielectric strength of neighbouring contacts Dielectric strength of open contact     0.626 inch 4.02 inch 2.48 inch Temperatures   Humidity Operating temperature, min. Storage temperature, min. Storage temperature   55 °C 85 °C -40 °C...55 °C Environmental Product Compliance   REACH SVHC   Input   Rated control voltage Power rating Coil resistance   Output   Rated switching voltage Max. switching voltage, DC AC switching capacity (resistive), max. Switch-on delay Min. switching power   0.1 Hz Contact data   Contact type   10 x 106 switching cycles General data   Mounting rail Mechanical switch position indicator   Insulation coordination   Rated voltage 250 V Pollution severity 2 Protection degree IP20 Creepage and clearance distance input – output ≥ 3 mm Impulse withstand voltage at neighbouring contacts 4.8 kV (1.2/50 µs) Impulse withstand voltage 5 kV (1.2/50 µs)   1.5 kVeff / 1 min. 1 kVeff / 1 min Creation date January 18, 2019 6:17:59 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 2     Data sheet D-SERIES DRI DRIKITP230VAC 2CO LD/PB   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Further details of approvals / standards   Standards Certificate no. (cURus) base   IEC 61810-1, EN 60664-1:2007, EN 61000-6-2:2005, EN 61000-6-4:2007 + A1:2011 E312083   Certificate no. (cURus) relay     PUSH IN with actuator 1.5 mm²       Stripping length, rated connection Clamping range, min. Wire connection cross section AWG, min. Wire cross-section, solid, min. E312083 Connection data   Wire connection method Clamping range, rated connection Clamping range, max. Wire connection cross section AWG, max. Wire cross-section, solid, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Conductor cross-section, flexible, AEH (DIN 46228-1), max.   1.5 mm² AWG 16 1.5 mm² 1.5 mm² 1 mm² 1.5 mm²         Wire connection cross-section, finely stranded, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Conductor cross-section, flexible, AEH (DIN 46228-1), min.   Blade size     eClass 6.2   10 mm 0.14 mm² AWG 26 0.14 mm² 0.14 mm² 0.14 mm² 0.14 mm² 0.4 x 2.5 mm Classifications   ETIM 6.0 eClass 9.1   EC001437 27-37-16-01 27-37-16-01 Downloads   Approval/Certificate/Document of Conformity Engineering Data   EU Konformitätserklärung / EU Declaration of Conformity EPLAN Creation date January 18, 2019 6:17:59 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 3     Data sheet D-SERIES DRI DRIKITP230VAC 2CO LD/PB   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Wiring diagram Graph Graph Graph Electrical service life DC load limit curve Resistive load AC operational voltage range Dimensional drawing Relay in combination with base Creation date January 18, 2019 6:17:59 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 4     Data sheet D-SERIES DRI DRIKITP230VAC 2CO LD/PB   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Miscellaneous Type codes Creation date January 18, 2019 6:17:59 PM CET   Catalogue status 04.01.2019 / We reserve the right to make technical changes. 5