2580230000

    Data sheet PRO INSTA 60W 24V 2.5A Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     The single-phase INSTA-POWER switching power supplies are characterised by a wide power spectrum, compact design and good value for money. They are suitable for temperature ranges from -25°C to +70°C, have international approvals and a wide voltage input range. This makes them suitable for a wide range of applications. This also includes signal and telecommunications systems as well as automation systems with a low power requirement up to 96 Watt. General ordering data   Type Order No. Version GTIN (EAN) Qty.   PRO INSTA 60W 24V 2.5A 2580230000 4050118590968 1 pc(s). Creation date September 11, 2019 3:22:41 PM CEST   Catalogue status 30.08.2019 / We reserve the right to make technical changes. 1     Data sheet PRO INSTA 60W 24V 2.5A   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Net weight   72 mm 90 mm 60 mm 258 g         Width (inches) Height (inches) Depth (inches)   2.835 inch 3.543 inch 2.362 inch 70 °C 85 °C -25 °C...70 °C       Operating temperature, min. Storage temperature, min. Storage temperature -25 °C -40 °C -40 °C...85 °C AC input voltage range 85...264 V AC (derating at 100 V AC) 0.25 A @ 370 V DC / 0.8 A @ 120 V DC 45…65 Hz max. 40 A 2 A / DI, safety fuse 6 A, Char. B, circuit breaker 2...4 A, Char. C circuit breaker Temperatures   Operating temperature, max. Storage temperature, max. Operating temperature   Input   AC current consumption Connection system DC input voltage range Input fuse (internal) Rated input voltage   0.7 A @ 230 V AC / 1.5 A   @ 100 V AC   PUSH IN   95…370 V DC   Yes   DC current consumption Frequency range AC Inrush current Recommended back-up fuse 100 - 240 V AC / 120 340 V DC Output   Capacitive load Continous output current @ UNominal Output voltage Rated output voltage   unrestricted 2.5 A @ 55 °C, 1.56 A @ 70 °C 22...28 V (adjustable via potentiometer on front) 24 V DC ± 1 %     Connection system Nominal output current for Unom   Ramp-up time   Residual ripple, breaking spikes   Housing version   Mounting position, installation notice     Power loss, idling Protection against reverse voltages from the load 30…35 V DC   PUSH IN 2.5 A @ 55 °C ≤ 100 ms < 50 mVss @ UNenn, Full Load General data   Degree of efficiency MTBF Operating temperature Power loss, nominal load Protection degree   89% > 750.000 h nach IEC 61709 (SN29500) -25 °C...70 °C 6.6 W IP20   Plastic, protective insulation Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring active subassemblies with full load, 5 mm with passive neighbouring subassemblies, direct row mounting with 90% rated load 0.44 W Creation date September 11, 2019 3:22:41 PM CEST   Catalogue status 30.08.2019 / We reserve the right to make technical changes. 2     Data sheet PRO INSTA 60W 24V 2.5A   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data EMC / shock / vibration   Limiting of mains voltage harmonic currents Vibration resistance IEC 60068-2-6   EN 61000-4-2 (ESD)| EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)| EN 61000-4-11 (dips), EN 61000-4-11 (Dips)   Shock resistance IEC 60068-2-27 2.3 g 15 g In all directions     3.5 kV 4 kV II       Insulation voltage output / earth Pollution severity   0.5 kV 2   For use with electronic equipment   Protective separation / protection against electrical shock   Acc. to EN50178 / VDE0160 VDE0100-410 / acc. to DIN57100-410   Noise emission in accordance with EN55032 Interference immunity test acc. to Class B EN 61000-4-2 (ESD)| EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)| EN 61000-4-11 (dips), EN 61000-4-11 (Dips) Insulation coordination   Insulation voltage input / earth Insulation voltage, input/output Protection class   Electrical safety (applied standards)   Electrical machine equipment Protection against dangerous shock currents Safety transformers for switch-mode power supplies   Acc. to EN60204 Acc. to VDE0106-101 According to EN 61558-2-16   Connection data (input)   Conductor cross-section, AWG/kcmil , max. Conductor cross-section, flexible , min. Conductor cross-section, rigid , min. Number of terminals   12 0.25 mm² 0.25 mm² 2 (L,N)         Conductor cross-section, AWG/kcmil , min. Conductor cross-section, rigid , max. Connection system Wire connection cross section, flexible (input), max. 24 2.5 mm² PUSH IN 2.5 mm² Connection data (output)   Conductor cross-section, AWG/kcmil , max. Conductor cross-section, flexible , max. Conductor cross-section, rigid , max. Connection system   12 2.5 mm² 2.5 mm² PUSH IN         Conductor cross-section, AWG/kcmil , min. Conductor cross-section, flexible , min. Conductor cross-section, rigid , min. Number of terminals     24 0.25 mm² 0.25 mm² 4 (++ / --) Signalling   LED green   Operating voltage OK Creation date September 11, 2019 3:22:41 PM CEST   Catalogue status 30.08.2019 / We reserve the right to make technical changes. 3     Data sheet PRO INSTA 60W 24V 2.5A   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Institute (CSA)   Certificate No. (CSA) 70211209   Classifications   ETIM 6.0 eClass 9.0   EC002540 27-04-07-01     eClass 6.2 eClass 9.1 19-05-10-01 27-04-07-01 Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity User Documentation   Declaration of Conformity Operating instruction Creation date September 11, 2019 3:22:41 PM CEST   Catalogue status 30.08.2019 / We reserve the right to make technical changes. 4     Data sheet PRO INSTA 60W 24V 2.5A   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date September 11, 2019 3:22:41 PM CEST   Catalogue status 30.08.2019 / We reserve the right to make technical changes. 5