2618440000

    Data sheet TERMSERIES TRP 230VUC 2CO Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Similar to illustration TERMSERIES relay module, complete modules consisting of a relay and a base with AC/DC/UC coils, available in different versions: • With screw and tension-clamp connection • AgNi contact, optionally with hard gold-plated contacts • 1 and 2 COs • Optionally with multiple-voltage input: 24...230 V UC • With various protective circuits in the input (free-wheel diode, RC element) • Illuminated ejection lever General ordering data   Type Order No. Version GTIN (EAN) Qty.   TRP 230VUC 2CO 2618440000 TERMSERIES, Relay module, Number of contacts: 2 CO contact AgNi, Rated control voltage: 230 V UC ±5 %, Continuous current: 8 A, PUSH IN 4050118670394 10 pc(s). Creation date May 6, 2020 4:31:59 PM CEST   Catalogue status 01.05.2020 / We reserve the right to make technical changes. 1     Data sheet TERMSERIES TRP 230VUC 2CO   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Net weight   12.8 mm 89.4 mm 87.8 mm 57 g         Width (inches) Height (inches) Depth (inches)   5-95% relative humidity, Tu = 40°C, without condensation -40 °C -40 °C -40 °C...85 °C   Operating temperature, max.       Storage temperature, max. Operating temperature   0.504 inch 3.52 inch 3.457 inch Temperatures   Humidity Operating temperature, min. Storage temperature, min. Storage temperature   60 °C 85 °C -40 °C...60 °C Rated data UL   Output current derating (ohmic) Connection cross-section AWG, max. Pollution severity level   6 A @ 60 °C, 8 A @ 50 °C     AWG 14   2 Connection cross-section AWG, min. Type of conductor Altitude AWG 26 rigid copper conductor, flexible copper conductor ≤ 2000 m, above sea level Input   Rated control voltage Rated current DC Pull-in/drop-out voltage, typ.       Rated current AC Power rating Pull-in/drop-out current, typ.     Protective circuit Coil voltage of the replacement relay           Max. switching voltage, AC Continuous current AC switching capacity (resistive), max. Switch-on delay Min. switching power     2 CO contact (AgNi)   Mechanical service life 30 x 106 switching cycles TS 35 No V-0       Test button Colour   No black 230 V UC ± 5 % 4.4 mA 125 V / 39 V AC 140 V / 30 V DC Green LED Status indicator Coil voltage of the replacement relay deviating from the rated control voltage Yes   5.5 mA 1 W, 1.2 VA 2.3 mA / 0.6 mA AC 2.5 mA / 0.4 mA DC Rectifier 110 V DC Output   Rated switching voltage Max. switching voltage, DC Inrush current DC switching capacity (resistive), max. Switch-off delay 250 V AC 250 V 15 A / 4 s 192 W @ 24 V ≤ 16 ms Max. switching frequency at rated load 0.1 Hz   250 V 8A 2000 VA ≤ 4.5 ms 1 mA @ 24 V, 10 mA @ 10 V, 100 mA @ 5 V Contact data   Contact type   General data   Rail Mechanical switch position indicator UL 94 flammability rating   Creation date May 6, 2020 4:31:59 PM CEST   Catalogue status 01.05.2020 / We reserve the right to make technical changes. 2     Data sheet TERMSERIES TRP 230VUC 2CO   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Insulation coordination   Rated voltage Pollution severity Dielectric strength, Input/Output 300 V 2 Dielectric strength of neighbouring contacts Dielectric strength to mounting rail 2.5 kVeff 4 kVeff / 1 Min.   1.2 kVeff / 5 s           Surge voltage category III Protection degree IP20 Creepage and clearance distance input – output ≥ 5.5 mm Dielectric strength of open contact 1 kVeff / 1 min Impulse withstand voltage 6 kV (1.2/50 µs) Further details of approvals / standards   Standards Certificate no. (cULus)   EN 50178, EN 55011, EN   61000-6-1, 2, 4   E141197 Certificate No. (DNVGL)   TAA00001E5 Connection data   Wire connection method Clamping range, rated connection Clamping range, max. Wire connection cross section AWG, max. Wire cross-section, solid, max. PUSH IN 1.5 mm² 2.5 mm² AWG 14 2.5 mm² Wire connection cross section, finely stranded, max. 2.5 mm² Wire cross-section, finely stranded, max. (AWG) AWG 14 Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 1.5 mm² Conductor cross-section, flexible, AEH (DIN 46228-1), max. 1.5 mm² Twin wire-end ferrules, max. 1 mm²       Stripping length, rated connection Clamping range, min. Wire connection cross section AWG, min. Wire cross-section, solid, min. 8 mm 0.14 mm²   0.14 mm² Wire connection cross-section, finely stranded, min. 0.14 mm² Wire cross-section, finely stranded, min. (AWG) AWG 26 Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 0.15 mm² Conductor cross-section, flexible, AEH (DIN 46228-1), min. 0.15 mm² Twin wire-end ferrules, min. 0.5 mm² Blade size 0.4 x 2.0 mm       ETIM 7.0 eClass 9.1   EC001437 27-37-16-01               AWG 26 Classifications   ETIM 6.0 eClass 9.0 eClass 10.0   EC001437 27-37-16-01 27-37-16-01 Approvals   Approvals   Downloads   Approval/Certificate/Document of Conformity Engineering Data User Documentation   EU Konformitätserklärung / EU Declaration of Conformity STEP Beipackzettel / Package Insert – multilingual Creation date May 6, 2020 4:31:59 PM CEST   Catalogue status 01.05.2020 / We reserve the right to make technical changes. 3     Data sheet TERMSERIES TRP 230VUC 2CO   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Wiring diagram Graph Graph DC load limit curve Resistive load Dimensional drawing Electrical service life230 V AC resistive load 230 V AC resistive load Creation date May 6, 2020 4:31:59 PM CEST   Catalogue status 01.05.2020 / We reserve the right to make technical changes. 4     Data sheet TERMSERIES TRP 230VUC 2CO   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Miscellaneous Type codes Creation date May 6, 2020 4:31:59 PM CEST   Catalogue status 01.05.2020 / We reserve the right to make technical changes. 5