2618790000

    Data sheet TERMSERIES TOP 24VDC 48VDC0.1A Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Similar to illustration TERMSERIES complete solid-state relay modules 3 to 48 V DC 0.1 A output versions consisting of a solid-state relay and a base with AC/DC/UC input; available in different designs: • With screw and tension-clamp connection • In 6.4 mm width • Optionally with multiple-voltage input: 24 to 230 V UC • With various protective circuits in the input (free-wheel diode, RC element) • Illuminated ejection lever General ordering data   Type Order No. Version GTIN (EAN) Qty.   TOP 24VDC 48VDC0.1A 2618790000 TERMSERIES, solid-state relais, 1 NO contact (Bipolar transistor), Rated control voltage: 24 V DC ±20 % , Rated switching voltage: 0…48 V DC, Continuous current: 100 mA, PUSH IN 4050118670042 10 pc(s). Creation date May 6, 2020 6:38:10 PM CEST   Catalogue status 01.05.2020 / We reserve the right to make technical changes. 1     Data sheet TERMSERIES TOP 24VDC 48VDC0.1A   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Net weight   6.4 mm 89.4 mm 87.8 mm 27 g         Width (inches) Height (inches) Depth (inches)   5-95% relative humidity, Tu = 40°C, without condensation -20 °C -40 °C -40 °C...70 °C   Operating temperature, max.       Storage temperature, max. Operating temperature   3,765 Years         Connection cross-section AWG, min. Type of conductor     0.252 inch 3.52 inch 3.457 inch Temperatures   Humidity Operating temperature, min. Storage temperature, min. Storage temperature   60 °C 70 °C -20 °C...60 °C Probability of failure   MTTF   Rated data UL   Ambient temperature (operational), max. 60 °C Connection cross-section AWG, max. AWG 14 Pollution severity level 2   AWG 26 rigid copper conductor, flexible copper conductor Control side   Rated control voltage Power rating Cut-in / dropout current Protective circuit Coil voltage of the replacement relay     24 V DC ±20 %   280 mW   4.8 mA / 3.2 mA DC   Free-wheeling diode, Reverse polarity protection   24 V DC Nominal control current Cut-in / dropout voltage Status indicator Coil voltage of the replacement relay deviating from the rated control voltage   10 mA DC ±20 % 14.5 V / 11.5 V DC Green LED           Continuous current Switch-off delay Leakage current Short-circuit-proof max. switching frequency (DC control voltage) 100 mA < 600 µs < 10 µA No 1 NO contact (Bipolar transistor)     TS 35 V-0     Colour   No Load side   Rated switching voltage Switch-on delay Voltage drop at max. load Min. switching current Protective circuit, load side   0…48 V DC < 50 µs ≤1V 500 µA Free-wheeling diode 300 Hz Contact data   Contact type   General data   Rail UL 94 flammability rating   black Creation date May 6, 2020 6:38:10 PM CEST   Catalogue status 01.05.2020 / We reserve the right to make technical changes. 2     Data sheet TERMSERIES TOP 24VDC 48VDC0.1A   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Insulation coordination   Rated voltage Surge voltage category 300 V       Pollution severity Clearance and creepage distances for control side - load side Dielectric strength to mounting rail   Protection degree DIN EN 50178 E141197     Certificate No. (DNVGL)   TAA00001E5 PUSH IN 1.5 mm²       Stripping length, rated connection Clamping range, min. Wire connection cross section AWG, min. Wire cross-section, solid, min. 8 mm 0.14 mm²   0.14 mm² Wire connection cross-section, finely stranded, min. 0.14 mm² Wire cross-section, finely stranded, min. (AWG) AWG 26 Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 0.15 mm² Conductor cross-section, flexible, AEH (DIN 46228-1), min. 0.15 mm² Twin wire-end ferrules, min. 0.5 mm² Blade size 0.4 x 2.0 mm       ETIM 7.0 eClass 9.1   EC001504 27-37-16-04 III Dielectric strength for control side - load 2.5 kVeff side Impulse withstand voltage 6 kV (1.2/50 µs)   2 ≥ 5.5 mm 4 kVeff / 1 Min. IP20 Further details of approvals / standards   Standards Certificate no. (cULus)   Connection data   Wire connection method Clamping range, rated connection Clamping range, max. Wire connection cross section AWG, max. Wire cross-section, solid, max. 2.5 mm² AWG 14 2.5 mm² Wire connection cross section, finely stranded, max. 2.5 mm² Wire cross-section, finely stranded, max. (AWG) AWG 14 Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. 1.5 mm² Conductor cross-section, flexible, AEH (DIN 46228-1), max. 1.5 mm² Twin wire-end ferrules, max. 1 mm²               AWG 26 Classifications   ETIM 6.0 eClass 9.0 eClass 10.0   EC001504 27-37-16-04 27-37-16-04 Approvals   Approvals   Downloads   Approval/Certificate/Document of Conformity Engineering Data Engineering Data User Documentation   EU Konformitätserklärung / EU Declaration of Conformity EPLAN STEP Beipackzettel / Package Insert – multilingual Creation date May 6, 2020 6:38:10 PM CEST   Catalogue status 01.05.2020 / We reserve the right to make technical changes. 3     Data sheet TERMSERIES TOP 24VDC 48VDC0.1A   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Wiring diagram Dimensional drawing Creation date May 6, 2020 6:38:10 PM CEST   Catalogue status 01.05.2020 / We reserve the right to make technical changes. 4     Data sheet TERMSERIES TOP 24VDC 48VDC0.1A   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Miscellaneous Type codes Creation date May 6, 2020 6:38:10 PM CEST   Catalogue status 01.05.2020 / We reserve the right to make technical changes. 5