2667910000

    Data sheet LMF 7.50/02/90 3.5SN OR BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com     Product image similar to illustration The innovative quick connector - simple, safe and economical: PCB terminals with spring connection and direct PUSH IN technology. A milestone in connection technology. Amazingly simple and simply amazing in practice: • Connect and easily detach solid wires or wires with wire-end ferrules without using tools • Processed automatically in the reflow or vapour phase • Potentials and clamping points marked clearly by coloured push buttons World-class design-in and processing phases, and suitable for a vast range of applications. General ordering data   Version Order No. Type GTIN (EAN) Qty. Product data Packaging Printed circuit board terminals, 7.50 mm, Number of poles: 2, 90°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN with actuator, Clamping range, max. : 2.5 mm², Box 2667910000 LMF 7.50/02/90 3.5SN OR BX 4050118804522 100 pc(s). IEC: 1000 V / 24 A / 0.5 - 2.5 mm² UL: 300 V / 20 A / AWG 24 - AWG 12 Box Creation date March 30, 2022 7:32:18 PM CEST     Catalogue status 25.03.2022 / We reserve the right to make technical changes. 1     Data sheet LMF 7.50/02/90 3.5SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Technical data Dimensions and weights   Depth Height Height of lowest version Width (inches)   19.2 mm 18.3 mm 14.8 mm 0.598 inch         Depth (inches) Height (inches) Width Net weight OMNIMATE Signal - series LMF THT solder connection 7.5 mm 2 3.5 mm 1.1 mm 2 DIN 5264   Wire connection method 0.756 inch 0.72 inch 15.2 mm 3.493 g System parameters   Product family Mounting onto the PCB Pitch in mm (P) Number of poles Solder pin length (l) Solder eyelet hole diameter (D) Number of solder pins per pole Screwdriver blade standard L1 in mm Touch-safe protection acc. to DIN VDE 57 106   7.5 mm Safe from finger touch                   PUSH IN with actuator Conductor outlet direction 90° Pitch in inches (P) 0.295 inch Pin series quantity 1 Solder pin dimensions d = 0.8 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm Screwdriver blade 0.6 x 3.5 Stripping length 10 mm Touch-safe protection acc. to DIN VDE 0470 IP 20 Protection degree IP20 Material data   Insulating material Colour chart (similar) UL 94 flammability rating Contact surface Tinning type Storage temperature, min. Operating temperature, min. Temperature range, installation, min.   Wemid (PA) RAL 2000 V-0 tinned matt -40 °C -50 °C -25 °C                 Colour Comparative Tracking Index (CTI) Contact material Coating Layer structure of solder connection Storage temperature, max. Operating temperature, max. Temperature range, installation, max.     Clamping range, max. 2.5 mm² Wire connection cross section AWG, max. AWG 12 Solid, max. H05(07) V-U 2.5 mm² Flexible, max. H05(07) V-K 2.5 mm² w. plastic collar ferrule, DIN 46228 pt 4, max. 2.5 mm² w. wire end ferrule, DIN 46228 pt 1, max. 2.5 mm²   orange ≥ 600 CuSn 4-6 μm SN 4...8 µm Sn matt 70 °C 120 °C 120 °C Conductors suitable for connection   Clamping range, min. 0.12 mm² Wire connection cross section AWG, min. AWG 24 Solid, min. H05(07) V-U 0.5 mm² Flexible, min. H05(07) V-K 0.25 mm² w. plastic collar ferrule, DIN 46228 pt 4, min. 0.25 mm² w. wire end ferrule, DIN 46228 pt 1, min. 0.25 mm² Reference text Length of ferrules is to be chosen depending on the product and the rated voltage., The outside diameter of the plastic collar should not be larger than the pitch (P)             Creation date March 30, 2022 7:32:18 PM CEST   Catalogue status 25.03.2022 / We reserve the right to make technical changes. 2     Data sheet LMF 7.50/02/90 3.5SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Technical data Rated data acc. to IEC   tested acc. to standard Rated current, max. number of poles (Tu=20°C) Rated current, max. number of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree III/2 Rated impulse voltage for surge voltage class/ pollution degree II/2 Rated impulse voltage for surge voltage class/ contamination degree III/3       Rated current, min. number of poles (Tu=20°C) Rated current, min. number of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree II/2 Rated voltage for surge voltage class / pollution degree III/3 Rated impulse voltage for surge voltage class/ pollution degree III/2 Short-time withstand current resistance   Certificate No. (CSA)         Rated voltage (Use group D / CSA) Rated current (Use group D / CSA) Wire cross-section, AWG, max.     Certificate No. (cURus) 300 V 20 A AWG 24 Specifications are maximum values, details see approval certificate.         E60693 Rated voltage (Use group D / UL 1059) 300 V Rated current (Use group D / UL 1059) 10 A Wire cross-section, AWG, max. AWG 12   Box 139 mm     VPE length VPE height 350 mm 31 mm EC002643 EC002643 27-44-04-01 27-46-01-01         ETIM 7.0 ECLASS 9.0 ECLASS 10.0   EC002643 27-44-04-01 27-44-04-01 IEC 60664-1, IEC 61984 24 A 24 A 600 V 6 kV 6 kV         24 A 24 A 1,000 V 500 V 6 kV 3 x 1s with 120 A Rated data acc. to CSA   Institute (CSA) Rated voltage (Use group B / CSA) Rated current (Use group B / CSA) Wire cross-section, AWG, min. Reference to approval values   300 V 20 A AWG 24 Specifications are maximum values, details see approval certificate. 200039-1815154 300 V 10 A AWG 12 Rated data acc. to UL 1059   Institute (cURus) Rated voltage (Use group B / UL 1059) Rated current (Use group B / UL 1059) Wire cross-section, AWG, min. Reference to approval values   Packing   Packaging VPE width   Classifications   ETIM 6.0 ETIM 8.0 ECLASS 9.1 ECLASS 11.0   Creation date March 30, 2022 7:32:18 PM CEST   Catalogue status 25.03.2022 / We reserve the right to make technical changes. 3     Data sheet LMF 7.50/02/90 3.5SN OR BX   Technical data Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Important note   IPC conformity Notes Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. • Additional variants on request • Rated current related to rated cross-section & min. No. of poles. • Wire end ferrule without plastic collar to DIN 46228/1 • Wire end ferrule with plastic collar to DIN 46228/4 • P on drawing = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. • The test point can only be used as potential-pickup point.   • Long term storage of the product with average temperature of 50 °C and average humidity 70%, 36 months Approvals   Approvals UL File Number Search   E60693 Downloads   Catalogues   Catalogues in PDF-format Creation date March 30, 2022 7:32:18 PM CEST   Catalogue status 25.03.2022 / We reserve the right to make technical changes. 4     Data sheet LMF 7.50/02/90 3.5SN OR BX   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Drawings Dimensional drawing Derating curve Derating curve Product benefits Product benefits Product benefits Creation date March 30, 2022 7:32:18 PM CEST   Catalogue status 25.03.2022 / We reserve the right to make technical changes. 5     Data sheet LMF 7.50/02/90 3.5SN OR BX   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Product benefits Creation date March 30, 2022 7:32:18 PM CEST   Catalogue status 25.03.2022 / We reserve the right to make technical changes. 6 Wave Solder Profile   Recommended wave solderding profiles Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com   Single Wave:   260 Contact time appr. 3 sec. 260 °C 255 °C 250 °C 240 220 200 Temperature [°C] 180 160 140 appr. 150 °C Preheating 120 100 Cooling rate < 6 °K/s 80 60 Typical process Prozess limits Temperature on board 40 Heating rate < 3 °K/s 20 0 0 20 40 60 80 100 120 time [s] 140 160 180 200 220 240 Double Wave: 255 °C Total contact time max. 10 sec. 260 240 260 °C 250 °C 220 200 Temperature [°C] 180 160 140 appr. 150°C Preheating 120 100 Cooling rate < 6 °K/s 80 60 Typical process Process limits Temperature on board 40 Heating rate < 3 °K/s 20 0 0 20 40 60 Wave soldering profiles 80 100 120 time [s] 140 160 180 200 220 240 Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are qualified. When choosing a suitable profile for your application, the following factors also need to be considered: - PCB thickness - Proportion of Cu in the layers - Single/double-sided assembly - Product range - Heating and cooling rates The single and double wave profiles each indicate the recommended operating range, including the maximum soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above maximum profile.   We reserve the right to make technical changes.