2726010000

    Data sheet IE-PCB-SP0-P-90V-THR Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com     Single pair Ethernet is a technology that only requires one pair of wires to transmit data and power. The resulting benefits will make SPE the preferred network at the field level and beyond. Advantages of Single Pair Ethernet • Consistent: Single Pair Ethernet enables uniform Ethernet-based communication from the sensor to the cloud • Future-proof: key technology for Industry 4.0 and IIoT • Flexible: ranges of up to 1000 m and transmission properties of up to 1 Gbps enable use across applications • Innovative: lighter, less space required, and reduced installation effort General ordering data   Version Order No. Type GTIN (EAN) Qty. Packaging   PCB plug-in connector, male header, Clip-on flange, THT/THR solder connection, 1.80 mm, Number of poles: 2, 90°, Solder pin length (l): 2.1 mm, Ni/Au, silver, black, Tape 2726010000 IE-PCB-SP0-P-90V-THR 4050118810769 100 pc(s). Tape Creation date January 21, 2021 4:47:06 PM CET   Catalogue status 15.01.2021 / We reserve the right to make technical changes. 1     Data sheet IE-PCB-SP0-P-90V-THR   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Technical data Dimensions and weights   Depth Height Length Net weight Width (inches)   14.2 mm 5.95 mm 14.2 mm 3g 0.144 inch           Depth (inches) Height (inches) Length (inches) Width   -40 °C...85 °C     0.559 inch 0.234 inch 0.559 inch 3.65 mm Temperatures   Operating temperature   Electrical properties   Current-carrying capacity Dielectric strength, contact / contact Dielectric strength, contact / shield Insulation strength Operational voltage range PoE / PoE+ Rated current Rated voltage   Current-carrying capacity Temperature 1000 V DC 2250 V DC ≥ 500 MΩ ≤ 50 V AC, ≤ 60 V DC PoDL acc. to IEEE 802.3bu / cg 4A 72 V 3.5 A 0 °C General standards   Connector standard   IEC 63171-2     IEC 63171-2     T1-B THT/THR solder connection     LED Number of poles   Performance-Category           Plugging cycles Protection degree Side termination, characteristic Solder pin length (l) Tolerance of solder pin position   Type of connection ± 0.1 mm Solder connection, Male contact       ETIM 7.0 ECLASS 9.1 ECLASS 11.0 EC002637 27-44-04-02 27-46-02-01 Standards   Connector standard   System specifications   Category Mounting onto the PCB Outgoing elbow Pitch in mm (P) Product family Shielding Solder pin dimensions Soldering process Transmission rate   90° 1.8 mm Industrial Ethernet Yes Octagonal Manual soldering, Wave soldering 10/100 MBit/s, 1000 MBit/s No 2 T1-B 10/100 MBit/s, 1000 MBit/s 750 IP20 Clip-on flange 2.1 mm Classifications   ETIM 6.0 ECLASS 9.0 ECLASS 10.0   EC002637 27-44-04-02 27-44-04-02 Approvals   ROHS   Conform Creation date January 21, 2021 4:47:06 PM CET   Catalogue status 15.01.2021 / We reserve the right to make technical changes. 2     Data sheet IE-PCB-SP0-P-90V-THR   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Technical data Downloads   Engineering Data   STEP Creation date January 21, 2021 4:47:06 PM CET   Catalogue status 15.01.2021 / We reserve the right to make technical changes. 3     Data sheet IE-PCB-SP0-P-90V-THR   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Creation date January 21, 2021 4:47:06 PM CET   Catalogue status 15.01.2021 / We reserve the right to make technical changes. 4