2741440000

    Data sheet MHS 5/05 H T3 B T Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com     Product image Configurable connector portfolio with fast and safe SNAP IN connection technology. The modular slice concept allows different hybrid combinations out of signal, data and power in one. The future-proof system is suitable for the highest requirements of the digital and connected world. General ordering data   Order No. Type GTIN (EAN) Qty. Product data Packaging   2741440000 MHS 5/05 H T3 B T 4064675055419 20 pc(s). IEC: 400 V / 26.8 A UL: 300 V / 18.5 A Tube Creation date December 21, 2020 4:41:28 PM CET   Catalogue status 08.12.2020 / We reserve the right to make technical changes. 1     Data sheet MHS 5/05 H T3 B T   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Technical data Dimensions and weights   Depth Height Height of lowest version Width   14 mm 15.1 mm 11.9 mm 26.4 mm         Depth (inches) Height (inches) Net weight Width (inches) 0.551 inch 0.594 inch 4.124 g 1.039 inch   Mounting onto the PCB                 Pitch in inches (P) Number of poles Solder pin length (l) Solder eyelet hole diameter (D) Outside diameter of solder pad Number of rows Touch-safe protection acc. to DIN VDE 57 106 Volume resistance THT/THR solder connection 0.197 inch 5 3.2 mm 1.4 mm 2.3 mm 1 Touch-safe above the printed circuit board   Pulling force/pole, max.             Colour Insulating material group Moisture Level (MSL) Contact base material Contact surface Layer structure of solder connection   Storage temperature, min.     Operating temperature, min.     Rated current, min. number of poles (Tu=20°C) Rated current, min. number of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree II/2 Rated voltage for surge voltage class / pollution degree III/3 Rated impulse voltage for surge voltage class/ pollution degree III/2   System specifications   Type of connection Board connection Pitch in mm (P) 5 mm Outgoing elbow 90° Number of solder pins per pole 1 Solder pin dimensions 1.0 x 1.0 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm Template aperture diameter 2.1 mm Pin series quantity 1 Touch-safe protection acc. to DIN VDE 0470 IP 20 Plugging force/pole, max. 8.5 N   ≤5 mΩ 8.5 N Material data   Insulating material Colour chart (similar) Comparative Tracking Index (CTI) UL 94 flammability rating Contact material Tinning type Layer structure of plug contact Storage temperature, max. Operating temperature, max.   PA 9T RAL 9011 ≥ 600 V-0 CuMg matt 1...3 µm Ni / 2...4 µm Sn matt 55 °C 100 °C black I 1 CuMg tinned 1...3 µm Ni / 2...4 µm Sn matt -25 °C -50 °C Rated data acc. to IEC   tested acc. to standard Rated current, max. number of poles (Tu=20°C) Rated current, max. number of poles (Tu=40°C) Rated voltage for surge voltage class / pollution degree III/2 Rated impulse voltage for surge voltage class/ pollution degree II/2 Rated impulse voltage for surge voltage class/ contamination degree III/3   IEC 60664-1, IEC 61984 19.7 A 16.9 A 320 V 4 kV 4 kV           26.8 A 23.1 A 400 V 250 V 4 kV Creation date December 21, 2020 4:41:28 PM CET   Catalogue status 08.12.2020 / We reserve the right to make technical changes. 2     Data sheet MHS 5/05 H T3 B T   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Technical data Rated data acc. to UL 1059   Institute (cURus)     Rated voltage (Use group B / UL 1059) 300 V   Rated current (Use group B / UL 1059) 18.5 A   Reference to approval values Specifications are maximum values, details see approval certificate. Certificate No. (cURus) E60693 Rated voltage (Use group D / UL 1059) 300 V Rated current (Use group D / UL 1059) 10 A     Classifications   ETIM 6.0 ECLASS 9.0 ECLASS 10.0   EC002637 27-44-04-02 27-44-04-02       ETIM 7.0 ECLASS 9.1 ECLASS 11.0 EC002637 27-44-04-02 27-46-02-01 Important note   IPC conformity Notes Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. • Rated current related to rated cross-section & min. No. of poles. • P on drawing = pitch • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.   • Diameter of solder eyelet D = 1.4+0.1mm Approvals   Approvals UL File Number Search   E60693 Downloads   Engineering Data   STEP Creation date December 21, 2020 4:41:28 PM CET   Catalogue status 08.12.2020 / We reserve the right to make technical changes. 3     Data sheet MHS 5/05 H T3 B T   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com Drawings Product image Dimensional drawing Creation date December 21, 2020 4:41:28 PM CET   Catalogue status 08.12.2020 / We reserve the right to make technical changes. 4     Data sheet MHS 5/05 H T3 B T   Mating connector (fully pluggable) Without middle-flange Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany   www.weidmueller.com   General ordering data Type MPS 5/05 S TN B B Product data GTIN (EAN) 4064675055112 UL: 300 V / 18.5 A / AWG 20 - AWG Order No. Qty. 2741590000 IEC: 400 V / 26.8 A / 0.5 - 2.5 mm² Packaging Box 12/7, AWG12/9 72 pc(s).   With middle-flange   General ordering data Type MPS 5/05 S F3 TN B B Product data GTIN (EAN) 4064675055228 UL: 300 V / 18.5 A / AWG 20 - AWG Order No. Qty. 2741700000 72 pc(s). IEC: 400 V / 26.8 A / 0.5 - 2.5 mm² Packaging Box 12/7, AWG12/9   Creation date December 21, 2020 4:41:28 PM CET   Catalogue status 08.12.2020 / We reserve the right to make technical changes. 5     Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com           Lötprofil Empfohlene Wellen-Lötprofile   Einzelwelle:   260 255 °C 250 °C 240 Kontaktzeit ca. 3 sec. 260 °C 220 200 Temperatur [°C] 180 160 140 max. 153 °C Vorwärmung 120 100 Abkühlrate < 6 °K/s 80 60 40 Aufheizrate < 3 °K/s 20 0 Durchgezogene Linie: Typisches Verfahren Unterbrochene Linien: Verfahrensgrenzen Temperatur auf der Leiterplatte 0 20 40 60 80 100 Doppelwelle: 120 Zeit [s] 140 160 180 200 220 240 Kontaktzeit max. 10 sec. 255 °C 260 260 °C 250 °C 240 220 200 190 °C 180 Temperatur [°C] 180 °C 160 140 max. 153 °C Vorwärmung 120 100 Abkühlrate < 6 °K/s 80 60 40 Aufheizrate < 3 °K/s 20 0 Durchgezogene Linie: Typisches Verfahren Unterbrochene Linien: Verfahrensgrenzen Temperatur auf der Leiterplatte 0 20 40 Wellen-Lötprofile 60 80 100 120 Zeit [s] 140 160 180 200 220 240 Bedrahtete Anschlusselemente sind in Anlehnung an die Norm DIN EN 61760-1 zu verarbeiten. Anbei zwei Empfehlungen für praxisbezoge Wellenlötprofile, mit denen Leiterplattenanschlussklemmen und Steckverbinder von Weidmüller qualifiziert sind. Bei der Wahl eines passenden Profils für Ihre Anwendung sind unteranderem folgende Faktoren zu beachten: - Stärke der Leiterplatte - Cu-Anteile in den Lagen - Ein-/Beidseitige Bestückung - Produktspektrum - Aufheiz- und Abkühlrate Die Einzel- und Doppelwelle zeigt jeweils den empfohlenen Verarbeitungsbereich inkl. der maximalen Löttemperatur von 260°C. In der Praxis liegt die maximale Löttemperatur sehr häufig weit unter dem o.g. Maximalprofil. Technische Änderungen vorbehalten