Data sheet
ACT20P
ACT20P-CI-CO
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
ACT20P: The flexible solution
• Precise and highly functional signal converters
• Simple configuration via display (Pro DCDC II), FDT/
DTM software or DIP switch
• Release levers simplify handling
• More space in the control cabinet, from 12.5 mm wide
for two channels
General ordering data
Type
Order No.
Version
GTIN (EAN)
Qty.
ACT20P-CI-CO
7760054114
Signal converter/isolator, Input : 0(4)-20 mA,
Output : 0(4)-20 mA
6944169656552
1 pc(s).
Creation date October 8, 2018 8:23:18 PM CEST
Catalogue status 28.09.2018 / We reserve the right to make technical changes.
1
Data sheet
ACT20P
ACT20P-CI-CO
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Dimensions and weights
Width
Height
Depth
Weight
12.5 mm
117.2 mm
113.7 mm
110 g
Width (inches)
Height (inches)
Depth (inches)
Net weight
0.492 inch
4.614 inch
4.476 inch
142 g
5...95 %, no condensation
-20 °C
-40 °C
-40 °C...85 °C
Operating temperature, max.
Storage temperature, max.
Operating temperature
60 °C
85 °C
-20 °C...60 °C
1
2-/3-wire transmitter, bidirectional HART® signal
≤1V
Sensor supply
Input current
> 17 V DC at 20 mA
Output current
< 0.1 % of end value
≤60 mA (24V power
supply, 20mA output)
TS 35
20…30 V DC
Configuration
Galvanic isolation
Step response time
Temperature coefficient
EN 61010-1:2011, UL
61010-1, EN 61326-1
Galvanic isolation
Insulation voltage
Surge voltage category
Tightening torque, min.
Clamping range, rated connection
Clamping range, max.
Wire connection cross section AWG,
max.
0.4 Nm
2.5 mm²
2.5 mm²
eClass 6.2
eClass 8.1
eClass 9.1
27-21-01-07
27-21-01-07
27-21-01-20
Temperatures
Humidity
Operating temperature, min.
Storage temperature, min.
Storage temperature
Input
Number of inputs
Input signal
Voltage drop
0...20 mA, 4…20mA
Output
Number of outputs
load impedance current
1
≤ 550 Ω
0...20 mA, 4...20 mA,
HART® digital signal
General data
Accuracy
Current consumption
Mounting rail
Supply voltage
none
3-way isolator, between
input ⁄ output ⁄ supply
≤ 0,5 ms
80 ppm/K
Insulation coordination
EMC standards
Impulse withstand voltage
Pollution severity
Test voltage
4 kV (1.2/50 µs)
2
300 V
3-way isolator, between
input ⁄ output ⁄ supply
2 kV inputs / outputs /
power supply
III
Connection data
Type of connection
Tightening torque, max.
Clamping range, min.
Wire connection cross section AWG,
min.
Screw connection
0.6 Nm
0.5 mm²
AWG 30
AWG 14
Classifications
ETIM 6.0
eClass 7.1
eClass 9.0
EC002653
27-21-01-07
27-21-01-07
Creation date October 8, 2018 8:23:18 PM CEST
Catalogue status 28.09.2018 / We reserve the right to make technical changes.
2
Data sheet
ACT20P
ACT20P-CI-CO
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Product information
Product information
The non-adjustable DC isolating amplifier ACT20P-CI-CO isolates analogue standard current signals from a
power source or from a 2- or 3-wire sensor. An analogue input current signal is linearly converted into an
analogue output current signal and is galvanically isolated. The power supply is galvanically isolated from the
input and output (3-way isolation).
Properties
• HART-compatible for 0.5 - 2.5 kHz
• The active or passive mA signal inputs are fully galvanically isolated.
• Operating status display on a front panel LED
• Galvanic 3-way isolation between input, output and supply.
Approvals
Approvals
Downloads
Approval/Certificate/Document of
Conformity
Brochure/Catalogue
Engineering Data
Engineering Data
User Documentation
Declaration of Conformity
CAT 4.1 ELECTR 16/17 EN
EPLAN, WSCAD, Zuken E3.S
STEP
Instruction sheet
Creation date October 8, 2018 8:23:18 PM CEST
Catalogue status 28.09.2018 / We reserve the right to make technical changes.
3
Data sheet
ACT20P
ACT20P-CI-CO
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Drawings
Dimensioned drawing
Creation date October 8, 2018 8:23:18 PM CEST
Catalogue status 28.09.2018 / We reserve the right to make technical changes.
4
很抱歉,暂时无法提供与“7760054114”相匹配的价格&库存,您可以联系我们找货
免费人工找货