7760054117

    Data sheet ACT20P ACT20P-2CI-2CO-12 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     ACT20P: The flexible solution • Precise and highly functional signal converters • Simple configuration via display (Pro DCDC II), FDT/ DTM software or DIP switch • Release levers simplify handling • More space in the control cabinet, from 12.5 mm wide for two channels General ordering data   Type Order No. Version GTIN (EAN) Qty.   ACT20P-2CI-2CO-12 7760054117 Signal converter/isolator, dual channel, Input : 2 x 4-20 mA, Output : 2 x 4-20 mA 6944169656576 1 pc(s). Creation date October 8, 2018 8:51:37 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 1     Data sheet ACT20P ACT20P-2CI-2CO-12   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Net weight   12.5 mm 117.2 mm 113.7 mm 172 g         Width (inches) Height (inches) Depth (inches)   0.492 inch 4.614 inch 4.476 inch 5...95 %, no condensation -20 °C -40 °C -40 °C...85 °C         Operating temperature, max. Storage temperature, max. Operating temperature   60 °C 85 °C -20 °C...60 °C   bi-directional HART signal     0...20 mA, 4…20mA Sensor supply Input voltage > 17 V DC at 20 mA   Output current     0...20 mA, 4...20 mA, HART® digital signal < 0.1 % of end value ≤60 mA (24V power supply, 20mA output) TS 35 20…30 V DC     Configuration Galvanic isolation     Step response time Temperature coefficient EN 61010-1:2011, UL 61010-1, EN 61326-1   Galvanic isolation   Insulation voltage     Surge voltage category           Tightening torque, min. Clamping range, rated connection Clamping range, max. Wire connection cross section AWG, max. 0.4 Nm 2.5 mm² 2.5 mm²       eClass 6.2 eClass 8.1 eClass 9.1 27-21-01-07 27-21-01-07 27-21-01-20 Temperatures   Humidity Operating temperature, min. Storage temperature, min. Storage temperature   Input   Number of inputs Input signal Input current   2 ® Voltage drop ≤ 28 V DC ≤1V Output   Number of outputs load impedance current   2 < 300 Ω, per channel General data   Accuracy Current consumption Mounting rail Supply voltage   none 3-way isolator, between input ⁄ output ⁄ supply ≤ 0,5 ms 80 ppm/K Insulation coordination   EMC standards Impulse withstand voltage Pollution severity Test voltage   4 kV (1.2/50 µs) 2 300 V 3-way isolator, between input ⁄ output ⁄ supply 2 kV inputs / outputs / power supply III Connection data   Type of connection Tightening torque, max. Clamping range, min. Wire connection cross section AWG, min.   Screw connection 0.6 Nm 0.5 mm² AWG 30 AWG 14 Classifications   ETIM 6.0 eClass 7.1 eClass 9.0   EC002653 27-21-01-07 27-21-01-07 Creation date October 8, 2018 8:51:37 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 2     Data sheet ACT20P ACT20P-2CI-2CO-12   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Product information   Product information   The dual-channel, non-adjustable DC isolating amplifier ACT20P-2CI-2CO isolates analogue standard current source signals. An analogue input current signal is linearly converted into an analogue output current signal and is galvanically isolated. The power supply is galvanically isolated from the input and output (5-way isolation). Properties • HART-compatible for 0.5 - 2.5 kHz • The active or passive mA signal inputs are fully galvanically isolated. • Operating status display on a front panel LED • Galvanic 5-way isolation between input, output and supply. Approvals   Approvals   Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   Declaration of Conformity CAT 4.1 ELECTR 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Instruction sheet Creation date October 8, 2018 8:51:37 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 3     Data sheet ACT20P ACT20P-2CI-2CO-12   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Dimensioned drawing Creation date October 8, 2018 8:51:37 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 4