7940011718

    Data sheet DPADCV 0-10V Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Modules in the DPA SERIES are used for monitoring limit values. They can be configured for a wide variety of industrial signals and feature two relay contacts for the alarm function on the output side. A potentiometer on the front side is used to custom adjust the setpoints and deadbands. The deadband reduces chatter from the alarm relay during switching operations. The reset point of the relay contact is individually adjusted, in this case away from the hysteresis (setpoint). In order to generate an alarm in the event of a power outage, you should select the "energised" operational status for one or both of the output relays. A high/low-trip switching behaviour can also be set independently for each channel. The following analogue input signals can be processed with the current DPA SERIES: temperature (thermocouple and PT100 temperature sensors), AC/DC currents and voltages, measuring wire and potentiometer positions, resistances, differential currents and differential resistances. The monitoring components are enclosed in a rugged railmountable metal housing and feature complete isolation at 2 kV. General ordering data   Type Order No. Version GTIN (EAN) Qty.   DPADCV 0-10V 7940011718 Signal converter/disconnector, 0...10 V or 1...5 V 4032248564354 1 pc(s). Creation date December 20, 2013 10:27:38 PM CET   Catalogue status / We reserve the right to make technical changes. 1     Data sheet DPADCV 0-10V   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Depth Net weight   46 mm 120 mm 424 g       Height Weight   97 mm 424 g 0...90 % (no condensation)    -25 °C...+70 °C Operating temperature   0 °C...+60 °C   24 V DC ± 10 % 1 MΩ (0...10 V) or 500 kΩ   (1...5 V) Type Input signal DC voltage [> 500 mV]   Hysteresis     1...25 % of max. input value Voltage input TS 35, TS 32 ± 0.05 % of signal range 24 V DC ± 10 % Screw connection           Long-term drift Power consumption Step response time Temperature coefficient   0.1 % / 10.000 h 3 W @ 24 V DC typ. 5 ms < 0.04 % / °C DIN EN 61326 2 kV input / output / power supply     Impulse withstand voltage Standards 4 kV (1.2/50 µs) EC001774 27-21-09-90     UNSPSC eClass 7.1 30-21-18-01 27-21-09-90 Temperatures   Humidity Storage temperature   Input   Supply voltage Input resistance   0...10 V or 1...5 V Settings   Fine adjustment Switching thresholds   Potentiometer, 20 turns 0...100 % of max. input value General data   Input/Output Mounting rail Repeat accuracy Supply voltage Type of connection   Insulation coordination   EMC standards Insulation voltage   DIN EN 50178 Classifications   ETIM 3.0 eClass 6.2   Product information   Descriptive text technical data   PE connection direct on enclosure Approvals   Approvals ROHS   Conform Creation date December 20, 2013 10:27:38 PM CET   Catalogue status / We reserve the right to make technical changes. 2     Data sheet DPADCV 0-10V   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Downloads   Declaration of Conformity   K_460_07_11.pdf Creation date December 20, 2013 10:27:38 PM CET   Catalogue status / We reserve the right to make technical changes. 3     Data sheet DPADCV 0-10V   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Electric symbol Creation date December 20, 2013 10:27:39 PM CET   Catalogue status / We reserve the right to make technical changes. 4