8174800000

    Data sheet SKH2 31 LP Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/ DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: • Circuit board with standard connectors and inserts with clamping-yoke connection. • Flange housing and holder/pull-out mechanism for the circuit card. • Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: • For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19" rack. • When there are only a few cards to install and connect. • The circuit board is located in a remote position where the cabling cannot be easily handled. • An older system needs to be updated with additional electronics modules. • For test devices, production processes and laboratories: where circuit boards needs to be swapped out quickly and connections must be easy to handle. General ordering data   Type Order No. Version GTIN (EAN) Qty.   SKH2 31 LP 8174800000 Interface, Plug-in connector, acc. to DIN 41617 female 4008190000325 1 pc(s). Creation date December 18, 2013 7:23:07 PM CET   Catalogue status / We reserve the right to make technical changes. 1     Data sheet SKH2 31 LP   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height   60.7 mm 192.5 mm     Width Net weight 160 mm 364 g 0...+55°C   Storage temperature -40...+60 °C Connection on control side Plug-in connector, acc. to DIN 41617 female a and b Temperatures   Operating temperature   Connection data   Connection (field side) Number of poles (control side) Design of the pluggable board     LP 5.08mm   31-pole female 100x160 mm euro format   for 19" racks Contact assembly   Rating data   Rated voltage     Rated current per connection 4A DIN EN 50178 II 1.5 kV       Rated insulation voltage Pollution severity level Insulation test voltage < 150 V AC 2 0.8 kVAC Screw connection 6 mm² 6 mm² 4 mm² 0.5 mm² AWG 26 0.5 Nm 6 mm                 Clamping range, min. Solid, min. H05(07) V-U Flexible, min. H05(07) V-K Flexible with sleeve, max. Sleeve with plastic collar, max. Max. wire cross-section, AWG [field] Tightening torque, max.   0.13 mm² 0.5 mm² 0.5 mm² 2.5 mm² 2.5 mm² AWG 12 0.6 Nm EC001419 27-24-22-04 27-14-11-52       UNSPSC eClass 6.2   30-21-18-01 27-24-22-04 125V AC / 150V DC Insulation coordination (EN50178)   According to Surge voltage category Pulse voltage test (1,2/50μs)   Connection field   Type of connection Clamping range, max. Solid, max. H05(07) V-U Flexible, max. H05(07) V-K Flexible with sleeve, min. Min. wire cross-section, AWG [field] Tightening torque, min. Stripping length   Classifications   ETIM 3.0 eClass 5.1 eClass 7.1   Product information   Descriptive text accessories   Kit for connection to TS35 8209340000 Approvals   Approvals ROHS   Conform Creation date December 18, 2013 7:23:07 PM CET   Catalogue status / We reserve the right to make technical changes. 2     Data sheet SKH2 31 LP   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date December 18, 2013 7:23:07 PM CET   Catalogue status / We reserve the right to make technical changes. 3