8329800000

    Data sheet RS F10 8R OUT 24VDC Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     The RS F40 or RS F10 interface elements (for 32 or 8 signals) enable a relay to be used to isolate signals coming from the PLC with sensors and field actuators. The main characteristics are: • Tension-clamp or screw connection system • Signals grouped according to bytes. • Extremely compact modules in RS 45 profile section for installation on standard TS35 mounting rail. General ordering data   Type Order No. Version GTIN (EAN) Qty.   RS F10 8R OUT 24VDC 8329800000 DOLD OW5691, Screw connection 4008190337216 1 pc(s). Creation date December 18, 2013 9:13:11 PM CET   Catalogue status / We reserve the right to make technical changes. 1     Data sheet RS F10 8R OUT 24VDC   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height   93 mm 51 mm     Width Net weight 45 mm 136 g 0...+55°C   Storage temperature -40...+70 °C green No yellow       Disconnector per relay Switch Power supply fuse No No No Temperatures   Operating temperature   General data   LED status display per relay Fuse per relay LED status of the supply voltage   Connection data   Connection on control side Connection (field side)     Connector according IEC60603-13/DIN41651   LM 3.5mm Number of poles (control side) Connection supply 10-pole LM 3.5mm Rating data   Mechanical service life Switch-off delay   3 x 107 switching cycles < 4 ms     Switch-on delay   < 8 ms 24 V DC ± 10%   Power rating 0.5 W 100 mA Potential-free contact 3A       Relay type Contact material AC peak current DOLD OW5691 AgNi 90/10 5A DIN EN 50178 < 250 V AC II 2         Rated input insulation voltage Overvoltage category inpututput Overvoltage category outpututput   < 50 V AC II II Screw connection 1.5 mm² 1.5 mm² 1.5 mm² 0.75 mm² AWG 14 0.25 Nm               Clamping range, min. Solid, min. H05(07) V-U Flexible, min. H05(07) V-K Flexible with sleeve, min. Min. wire cross-section, AWG [field] Tightening torque, min. Stripping length 0.08 mm² 0.5 mm² 0.5 mm² 0.5 mm² AWG 28 0.2 Nm 5 mm Ratings data input   Input voltage   Ratings data output   Min. switching current Type of output Max. AC continuous current   Insulation coordinates (EN50178)   According to Rated output insulation voltage Overvoltage category input/input Pollution severity level   Connection field   Type of connection Clamping range, max. Solid, max. H05(07) V-U Flexible, max. H05(07) V-K Sleeve with plastic collar, max. Max. wire cross-section, AWG [field] Tightening torque, max.   Creation date December 18, 2013 9:13:11 PM CET   Catalogue status / We reserve the right to make technical changes. 2     Data sheet RS F10 8R OUT 24VDC   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Supply connection   Type of connection Clamping range, max. Solid, max. H05(07) V-U Flexible, max. H05(07) V-K Ferrule with plastic collar, max. Wire cross-section, max. AWG Tightening torque, max.   Screw connection 1.5 mm² 1.5 mm² 1.5 mm² 0.75 mm² AWG 14 0.25 Nm               Clamping range, min. Solid, min. H05(07) V-U Flexible, min. H05(07) V-K Flexible with sleeve, min. Wire cross-section, min. AWG Tightening torque, min. Stripping length 0.08 mm² 0.08 mm² 0.08 mm² 0.5 mm² AWG 28 0.2 Nm 5 mm EC001419 27-24-22-04 27-24-22-04       UNSPSC eClass 6.2   30-21-18-01 27-24-22-04 Classifications   ETIM 3.0 eClass 5.1 eClass 7.1   Approvals   Approvals ROHS   Conform Downloads   Declaration of Conformity   K126_10_97.PDF Creation date December 18, 2013 9:13:11 PM CET   Catalogue status / We reserve the right to make technical changes. 3     Data sheet RS F10 8R OUT 24VDC   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date December 18, 2013 9:13:11 PM CET   Catalogue status / We reserve the right to make technical changes. 4