8561230000

Product catalogue | Electronics | Surge protection | Low-voltage supply | Class I lightning arrester with spark gap | Sparkover gap General ordering data Order No. Part designation Version EAN Qty. Product notes Note, ordering data Product description Function Note, accessories 8561230000 PU 1 TSG 50kA / 1,5kV Surge protection for low-voltage supply, Rated voltage: 230 V 4032248208289 1 pc(s). Cross-connection QB 18-4 order no. 8619440000Cross-connection QB 18-6 order no. 8619450000 Class I lightning arrester with triggered sparkover gap for industrial applications Designation BZ18, PE PE PE PE PE, order no. 8619470000Designation BZ18, L1 L2 L3 N PE, order no. 8619460000 Clamped conductors Rated cross-section for solid/flexible with ferrule Stranded, max. Stranded, min. Tightening torque range Type of connection 35 mm² 25 mm² 10 mm² 4.5 Nm Screw connection General data Optical function display Design Pollution severity Type of connection Rated cross-section for solid/flexible with ferrule No Installation housing 2 Screw connection 35 mm² -1- Product catalogue | Electronics | Surge protection | Low-voltage supply | Class I lightning arrester with spark gap | Sparkover gap General data solid flexible Flexible w. ferrule (DIN 46228-1) stranded Ambient temperature (operational) Storage temperature Note, accessories Insulation coordination acc. to EN 50178 Overvoltage category Pollution severity Interference voltage On output side (L /N - PE) at max. discharge current; smaller On output side, smaller Protective elements Optical function display Technical data Rated voltage Rated voltage (AC) Max. continuous voltage, Uc (AC) Requirements class, acc. to IEC 61643-1 Requirements class, acc. to EN 61643-11 Acc.to DIN VDE 0675-6 Lightning test current I imp (10/350 µs) Specific energy, per path Short-circuit current extinction without back-up fuse Short-circuit strength with max. back-up fuse Sparkover time Fuse, max. Protection level Up (typical) Leakage current at Un AC/DC/UC Discharge current, max. (10/350 µs) Mains frequency at 250 Vmax Dimensions Clamping range, max. Clamping range, min. Clamping range, nom. Length Height Width 10 ... 25 mm² -40 ... 85°C -40 ... 85°C Designation BZ18, PE PE PE PE PE, order no. 8619470000Designation BZ18, L1 L2 L3 N PE, order no. 8619460000 III 2 1,500 V 1500 V No 230 V 230 V 260 V Class I T1 Requirements class B 50 kA with 25 As charge 625 kJ/Ω 500 A / 50 Hz 25 kA ≤ 1 µs 125 A gl 1500 V 2.5 mA AC 50 kA 50...60 Hz 35 mm² 10 mm² 35 mm² 91 mm 63 mm 18 mm -2- Product catalogue | Electronics | Surge protection | Low-voltage supply | Class I lightning arrester with spark gap | Sparkover gap Approvals Approvals institutes Classifications eClass 4.1 eClass 5.0 eClass 5.1 27-14-02-01 27-14-02-01 27-14-02-01 Similar products Order No. 8561260000 8762020000 8561220000 8561250000 Part designation PU 1 TSG 35kA / 0,9kV PU 1 TSG 100kA/1,5 kV PU1 TSG Plus 330 VAC 0,9kV PU1 TSG Plus 440 VAC 1,5kV Version Surge protection for low-voltage supply, Rated voltage: 230 V Surge protection for low-voltage supply, Rated voltage: 230 V Surge protection for low-voltage supply, Rated voltage: 230 V Surge protection for low-voltage supply, Rated voltage: 400 V -3-