8693280000

    Data sheet... RIDERSERIES RCL334024 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Standard relays in the RIDERSERIES RCL • 1 NO contact • Low height of 15.7 mm General ordering data   Order No. Type Version GTIN (EAN) Qty.   8693280000 RCL334024 RIDERSERIES, Relais, No. of contacts: 1, NO contact, AgNi 90/10, Rated control voltage: 24 V DC, Continuous current: 16 A, Plug-in connection 4032248364732 20 pc(s). Creation date April 1, 2013 10:43:49 PM CEST   Catalogue status 20.12.2012 / We reserve the right to make technical changes. 1     Data sheet... RIDERSERIES RCL334024   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Ratings   Conductor connection system Weight     Humidity   UL 94 flammability rating 12.7 mm 15.7 mm 15 g       Height Weight   29 mm 14 g -40 °C...+70 °C   Storage temperature -40 °C...+85 °C       Rated current DC Power rating   16.7 mA 500 mW         Max. switching voltage, AC making current Switch-on delay Min. switching power     400 V 30 A / 4 s ≤ 8 ms 100 mA / 5 V, 10 V / 10 mA, 24 V / 1 mA     Contact design Mechanical service life     Clearance and creepage distances for control side - load side Protection degree       Free-wheel diode     Plug-in connection 14 g 40 °C / 93 % rel. humidity, no condensation V-0 Dimensions and weights   Width Depth Net weight   Temperatures   Operating temperature   Input   Rated control voltage 24 V DC Coil resistance 1,440 Ω ±10 % Pull-in (sparkover) / drop-out voltage DC coil 16.8 V / 2.4 V   Output   Rated switching voltage Continuous current Max. switching power Switch-off delay 250 V AC 16 A 4000 VA ≤ 6 ms Max. switching frequency at rated load 0.1 Hz   Contact specifications   No. of contacts Contact material   1 AgNi 90/10 NO contact AC coil 10 x 106 Switching cycles, DC coil 30 x 106 Switching cycles Insulation coordination   Rated voltage 250 V Dielectric strength for control side - load 5 kVeff / 1min side Insulating material group IIIa   ≥ 10 mm IP 20 Other technical data   Version   Relay No Further details of approvals / standards   Standards   IEC 61810-1, UL508 Creation date April 1, 2013 10:43:49 PM CEST   Catalogue status 20.12.2012 / We reserve the right to make technical changes. 2     Data sheet... RIDERSERIES RCL334024   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Classifications   ETIM 2.0 UNSPSC eClass 5.1 eClass 7.0   EC001437 30-21-19-17 27-37-16-01 27-37-16-01         ETIM 3.0 eClass 4.1 eClass 6.0   EC001437 40-02-06-14 27-37-16-01 Approvals   Approvals   Creation date April 1, 2013 10:43:49 PM CEST   Catalogue status 20.12.2012 / We reserve the right to make technical changes. 3     Data sheet... RIDERSERIES RCL334024   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Mating connector (fully pluggable) Base   Relay base for RIDERSERIES RCL relays • Screw and tension clamp connection • Standard and low heights • Plug-in frame for PCB connections General ordering data Order No. Type 8693930000 SRC 2CO N Version GTIN (EAN) Qty. RIDERSERIES, Relay base, 4032248365418 10 pc(s). Screw connection         8783930000 SRC 2CO Z RIDERSERIES, Relay base, 4032248471430 10 pc(s).     8690830000 SRC 2CO RIDERSERIES, Relay base, 4032248361519 10 pc(s).     Tension clamp connection Screw connection   Base   Relay base for the RIDERSERIES RCI relays • 1 and 2 CO contacts • Screw and PUSH IN connection • Standard and low heights General ordering data Order No. Type 8869500000 SRC-I 2CO P Version GTIN (EAN) Qty. RIDERSERIES, Relay base, 4032248614455 10 pc(s). Continuous current: 16         A(1, 8 A, PUSH IN spring connection   Creation date April 1, 2013 10:43:49 PM CEST   Catalogue status 20.12.2012 / We reserve the right to make technical changes. 4