8731710000

    Data sheet Z-series ZTR 2.5 BL Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Spring connection with tension clamp Technology Tension clamp technology is a universal contact system for all common conductor connection types. Its fantastic level of flexibility makes the tension clamp a profitable alternative connection. General ordering data   Type Order No. Version GTIN (EAN) Qty.   ZTR 2.5 BL 8731710000 Test-disconnect terminal, Tension clamp connection, 2.5 mm², 500 V, 20 A, Pivoting, Blue 4032248404896 100 pc(s). Creation date October 26, 2018 11:15:04 PM CEST   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 1     Data sheet Z-series ZTR 2.5 BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   5.1 mm 59.5 mm 38.5 mm 41 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.201 inch 2.343 inch 1.516 inch 8.66 g -50 °C   Continuous operating temp., max. 120 °C Wemid V-0     Colour   Blue Temperatures   Continuous operating temp., min.   Material data   Material UL 94 flammability rating   System specifications   Version Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   Tension-clamp connection,   Disconnection element, for plug-in cross-connector, One end without connector   1   2   No   TS 35   No End cover plate required Number of levels Number of potentials per tier PE connection N-function PEN function Yes 1 1 No Yes No Additional technical data   Explosion-tested version Number of similar terminals Type of mounting   No 2 Snap-on       Installation advice Open sides   Direct mounting right 200039-1152892 5A 600 V 30 AWG         Current size C (CSA) Voltage size C (CSA) Wire cross section max. (CSA)   15 A 600 V 12 AWG     CSA rating data   Certificate No. (CSA) Current size D (CSA) Voltage size D (CSA) Wire cross section min. (CSA)   Conductors for clamping (additional connection)   Conductor cross-section, flexible plus plastic collar DIN 46228/1, further connection, max.   2.5 mm² Creation date October 26, 2018 11:15:04 PM CEST   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 2     Data sheet Z-series ZTR 2.5 BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Gauge to IEC 60947-1 Stripping length Wire connection cross section AWG, max. Wire connection cross section, finely stranded, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. Wire connection cross-section, solid core, max.   0.6 x 3.5 mm 0.05 mm² A3 10 mm AWG 12 4 mm² 0.5 mm² 0.5 mm²                 Clamping range, max. Connection direction Number of connections Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. 4 mm² top 2 Tension clamp connection AWG 30 2.5 mm² 2.5 mm² 0.5 mm²   Wire connection cross-section, solid core, min. without Pivoting     Integral test socket   Yes 2.5 mm² 20 A       500 V 20 A   Rated voltage Current at maximum wires Volume resistance according to IEC 60947-7-x Pollution severity E60693 30 AWG 30 AWG 600 V         Conductor size Factory wiring max. (UR) 12 AWG Conductor size Field wiring max. (UR) 12 AWG Current size C (UR) 20 A   EC000902 EC000902 30-21-18-11 27-14-11-26 27-14-11-26 27-14-11-26             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   4 mm² 0.5 mm² Disconnect terminals   Cross-disconnect Slitting   Rating data   Rated cross-section Rated current Standards Rated impulse withstand voltage   IEC 60947-7-1 6 kV 1.33 mΩ 3 UL rating data   Certificate No. (UR) Conductor size Factory wiring min. (UR) Conductor size Field wiring min. (UR) Voltage size C (UR)   Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000902 EC000902 27-14-11-26 27-14-11-26 27-14-11-26 Product information   Descriptive text technical data Instructions for accessories   2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller PZ 6/5 crimping tool. If the disconnect lever is replaced by the SIHA 3, a fused terminal is created. Creation date October 26, 2018 11:15:04 PM CEST   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 3     Data sheet Z-series ZTR 2.5 BL   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data   DE_PT1102_20160418_1486_ISSUE01.pdf CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP Safety note   Safety notice   Safety Information Creation date October 26, 2018 11:15:04 PM CEST   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 4     Data sheet Z-series ZTR 2.5 BL   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date October 26, 2018 11:15:04 PM CEST   Catalogue status 11.10.2018 / We reserve the right to make technical changes. 5