8939670000

    Data sheet WAVESERIES WAS6 TTA Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     When used for industrial monitoring applications, sensors can record ambience conditions. Sensor signals are used within the process to continually track changes to the area being monitored. Both digital and analogue signals can occur. Normally an electrical voltage or current value is produced which corresponds proportionally to the physical variables that are being monitored Analogue signal processing is required when automation processes have to constantly maintain or reach defined conditions. This is particularly significant for process automation applications. Standardised electrical signals are typically used for process engineering. Analogue standardised currents / voltage 0(4)...20 mA/ 0...10 V have established themselves as physical measurement and control variables. Weidmüller meets the ever increasing challenges of automation and offers a product portfolio tailored to the requirements of handling sensor signals in analogue signal processing The analogue signal processing products can be used universally in combination with other Weidmüller products and in combination among each other. Their electrical and mechanical design is such that they require only minimal wiring efforts. Housing types and wire-connection methods matched to the respective application facilitate the universal use in process and industrial automation applications. The product line includes the following functions: • Isolating transformers,  supply isolators and signal converters for DC standard signals • Temperature measuring transducers for resistance thermometers and thermocouples, • frequency converters, • potentiometer-measuring-transducers, • bridge measuring transducers (strain gauges) • trip amplifiers and modules for monitoring electrical and non-electrical process variables • AD/DA converters • displays • calibration devices General ordering data are available as pure signal The products mentioned   converters / isolation transducers, 2-way/3-way isolators, Type WAS6 isolators TTA supply isolators,  passive or as trip amplifiers. Order No. Version GTIN (EAN) Qty.   8939670000 Signal converter/insulator, Limit value monitoring, Screw connection 4032248721078 1 pc(s). Creation date October 8, 2018 8:14:38 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 1     Data sheet WAVESERIES WAS6 TTA   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Width Depth Weight   100 mm 45 mm 112.4 mm 215 g         Length (inches) Width (inches) Depth (inches) Net weight 3.937 inch 1.772 inch 4.425 inch 256.1 g 5...95 %, no condensation -40 °C -40 °C -40 °C...85 °C         Operating temperature, max. Storage temperature, max. Operating temperature   70 °C 85 °C -40 °C...70 °C 138 Jahre       Sensor   Input voltage Temperatures   Humidity Operating temperature, min. Storage temperature, min. Storage temperature   Probability of failure   MTTF   Input   Number of inputs Sensor supply Input current Resistance   1 24 V DC / 22 mA -20...50 mA (min. span 0.4   mA)   10 Ω…5 kΩ Input frequency Potentiometer Thermocouples: B, E, J, K, L, N, R, S, T (IEC 60584), PT100, PT1000, (EN 60571) Ni100, Ni1000, (JIS1604), Cu10, Cu25, Cu50, Cu100 (DIN 43760) 2-/3-/4-wire -200...500 mV (min. 4 mV span), -20...50 V DC (min. 0.5 V span) 2 Hz…100 kHz 100 Ω...100 kΩ General data   Accuracy Power consumption Supply voltage   < 0.1 % span (DC. RTD);   0.2 % span (or 1 °C) + CJ failure   < 3.5 W Configuration Step response time   Temperature coefficient   EMC standards       Insulation voltage Rated voltage   18...264 V AC/DC Using free Windows software, TTA Set Software 50 ms...1 sec (RTD, mV inputs), 110 ms...1 sec (V, mA inputs) < 0.1 % / K (DC, RTD); < 0.1 % FSR / K + CJ error 0.07 °C/K (thermocouples ) Insulation coordination   Clearance & creepage distances Impulse withstand voltage Pollution severity Surge voltage category   ≥ 5.5 mm (1 mm Input/ output) 6 kV 2 III EN 55011, EN 61000-6 2.5 kV 300 V Creation date October 8, 2018 8:14:38 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 2     Data sheet WAVESERIES WAS6 TTA   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Output (analogue)   Load resistance current Output current Signal output     < 700 Ω Adjustable between 0...20   mA (min. span of 5 mA)   Load resistance voltage Output voltage Transmit function direct or inverted > 10 kΩ @ 0...10 V / > 20 kΩ @ -10...+10 V Adjustable between -10... +10 V (min. span of 2.5 V) Linear, x1/2, x3/2, x5/2 or user-defined curve (101 points) Output (digital)   Alarm function Type     Top and bottom limit values, window range, Over-temperature, Alarm mode: delay, switch on or switch on/off, Holding function can be activated, Delayed 0...4200 s   2 x 1 CO contact (hard gold-plated), Process alarms (4x) with hysteresis, with alarm delay (configurable) 0…180 s Number of digital outputs Max. switching voltage, AC 2 250 V Connection data   Type of connection Tightening torque, min. Clamping range, rated connection Clamping range, max.   Screw connection 0.4 Nm 2.5 mm² 2.5 mm²         Stripping length, rated connection Tightening torque, max. Clamping range, min.   7 mm 0.5 Nm 0.5 mm² EC002479 EC002479 30-21-18-01 27-21-01-07 27-21-01-07 27-21-01-90             ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0   EC002479 EC002653 27-21-01-07 27-21-01-07 27-21-01-07 Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   Creation date October 8, 2018 8:14:38 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 3     Data sheet WAVESERIES WAS6 TTA   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Product information   Product information WAS/WAZ6 TTA is a universal signal converter and trip amplifier that can be configured on the PC. Combines the functions of isolation, transmission, linearisation and trip amplification in a single module. These exceptional characteristics and outstanding configurability combine to make the TTA truly unique.  The TTA functions with stability and precision under a wide range of voltages and ambient temperatures. It is compatible with all standard sensor types.   • Universal input signals: temperature signals such as resistance thermometer, thermocouple, potentiometer, frequency transmitter, DC voltage signals and current signals • Loop-powered or passive input • Wide-range power supply: 18 – 264 V AC/DC • User-defined linearization • Inputs and outputs can be configured on PC • Combined analogue and relay output • Ambient temperature range: -40 °C …70 °C The CBX200 USB interface is used to connect to the PC. The WAS/WAZ6 TTA is also offered as an option with ATEX Zone 2 and UL C1D2 approvals. Descriptive text ordering data Instructions for accessories   CBX200 USB configuration adapter - 8978580000 CBX200 USB interface - 8978580000 Connects the WAVE TTA with a PC for calibration Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Software User Documentation   ATEX certification Declaration of Conformity CAT 4.1 ELECTR 16/17 EN EPLAN, WSCAD Install_TTASet_V107.zip Manual english, deutsch, france Instruction sheet Creation date October 8, 2018 8:14:38 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 4     Data sheet WAVESERIES WAS6 TTA   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Screenshot of TTA Set Software connection to your PC Creation date October 8, 2018 8:14:38 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 5     Data sheet WAVESERIES WAS6 TTA   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date October 8, 2018 8:14:38 PM CEST   Catalogue status 28.09.2018 / We reserve the right to make technical changes. 6