Contents
Pliers
Pliers
Pliers
Introduction
E.2
VDE-insulated combination pliers
E.3
VDE-insulated diagonal-cutting pliers
E.4
VDE-insulated telephone pliers
E.5
VDE-insulated flat- and round-nose pliers
E.6
ESD pliers
E.8
E
E.1
Introduction
Pliers
Pliers
Working on live systems calls for special safety procedures
and special tools specially produced and tested for such
applications.
Weidmüller can provide users with a complete range of pliers
complying with national and international testing standards.
All Weidmüller pliers are produced and tested to DIN EN 60900.
E
Their ergonomic design fits snugly in the hand, resulting in
a more natural, non-fatiguing hand position so you don’t
catch your fingers.
VDE-insulated combination pliers
KBZ 160 / KBZ 180 / KBZ 200
KBZI 200
p to 1000 V (AC) and 1500 V (DC) protective
u
insulation to IEC 900, DIN EN 60900
• drop-forged from high-quality special tool steels
• safety handle with ergonomic and non-slip TPE
VDE sleeve
• made from shockproof, heat-and cold-resistant,
not readily flammable, cadmium-free TPE
(thermoplastic elastomer)
• elastic grip zone and hard core
• polished surface
• nickel-chromium electrogalvanised coating
protects against corrosion
Combination pliers
Heavy-duty combination pliers
(telephone pliers)
ombination pliers acc. to DIN ISO 5746
C
• With opening gap (see diagram)
• Foil and sheet up to a thickness of 2.5 mm can
be gripped with the tip
• When thickness does not exceed 2.5 mm, the
gripping force pulls the workpiece towards the
joint
• Extra-long cutter for ribbon and round cables
• For cutting soft and hard wire
• Cutting edges inductively hardened to approx.
60 HRC
elegraph pliers (combination pliers), acc. to
T
DIN 5746
• Heavy-duty model for tough demanding jobs
• Extra-long cutter for ribbon and round cables
• For cutting soft and hard wire
• Cutting edges inductively hardened to approx.
60 HRC
Pliers
VDE-insulated combination pliers
Technical data
Cutting performance
Conductor diameter, max. (H)
Conductor diameter, max. (MH)
Tool data
Cutter hardness
Total length
Weight
Note
mm
mm
HRC
mm
g
KBZ 160
1.8
2.5
KBZ 180
2.5
2.8
KBZ 200
2.5
3
KBZI 200
2.5
3
60
160
230
60
180
290
60
200
362
60
200
412
(MH) medium-hard wire; (H) hard wire; (P) piano wire
(MH) medium-hard wire; (H) hard wire; (P) piano wire
Ordering data
Version
Type
Qty
Order No.
KBZ 160
1
9046280000
KBZ 180
1
9046290000
KBZ 200
1
9046300000
Type
KBZI 200
Qty
1
Order No.
9046430000
Note
E.3
E
Pliers
VDE-insulated diagonal-cutting pliers
VDE-insulated diagonal-cutting pliers
KSE 160 / KSE 200 / SE TOP
SE HD 140 / SE HD 160 / SE HD 180
p to 1000 V (AC) and 1500 V (DC)
u
protective insulation to IEC 900, DIN EN
60900
• drop-forged from high-quality special tool steels
• safety handle with ergonomic and non-slip TPE
VDE sleeve
• made from shockproof, heat-and cold-resistant,
not readily flammable, cadmium-free TPE
(thermoplastic elastomer)
• elastic grip zone and hard core
• polished surface
• nickel-chromium electrogalvanised coating
protects against corrosion
Professional diagonal-cutting pliers for piano
wire
Diagonal-cutting pliers for hard wire
iagonal-cutting pliers, acc. to DIN ISO 5749
D
• Cutting edges inductively hardened to approx.
64 HRC
• For cutting soft wire and piano wire
Diagonal-cutting pliers, acc. to DIN ISO 5749
E
KSE 160 - KSE 200
• Optimized transmission of force
• Optimized precision cutting edge
• With inlaid joint
• With precision cutting edges
• Cutting edges inductively hardened to approx.
62 HRC
• Special tool steel
SE TOP
• With inlaid joint
• Extra-fine precision cutting edge
Technical data
Cutting performance
Conductor diameter, max. (H)
Conductor diameter, max. (MH)
Conductor diameter, max. (P)
Tool data
Cutter hardness
Total length
Weight
Note
mm
mm
mm
HRC
mm
g
KSE 160
2.5
3.5
2
KSE 200
3
4.2
2.5
SE TOP
2.5
3.5
2
SE HD 140
2
2.8
1.4
SE HD 160
2.3
3
1.6
SE HD 180
3
3.8
1.8
64
160
243
64
200
325
64
160
251
62
140
203
62
160
253
62
180
291
(MH) medium-hard wire; (H) hard wire; (P) piano wire
(MH) medium-hard wire; (H) hard wire; (P) piano wire
Ordering data
Version
Note
E.4
Type
Qty
Order No.
Type
Qty
Order No.
KSE 160
1
9046410000
SE HD 140
1
9046310000
KSE 200
1
9046420000
SE HD 160
1
9046320000
SE TOP
1
9046340000
SE HD 180
1
9046330000
VDE-insulated telephone pliers
FRZ SG 160 / FRZ SG 200
FRZ S 160 / FRZ S 200
p to 1000 V (AC) and 1500 V (DC) protective
u
insulation to IEC 900, DIN EN 60900
• drop-forged from high-quality special tool steels
• safety handle with ergonomic and non-slip TPE
VDE sleeve
• made from shockproof, heat-and cold-resistant,
not readily flammable, cadmium-free TPE
(thermoplastic elastomer)
• elastic grip zone and hard core
• polished surface
• nickel-chromium electrogalvanised coating
protects against corrosion
Bent half-round-nose pliers with cutter
(telephone pliers)
Half-round-nose pliers with cutter
(telephone pliers)
ent telephone pliers with cutter
B
acc. to DIN ISO 5745
• Half-rounded jaws
• Serrated gripping surfaces
• Tip bent at 45°
• Cutting edges inductively hardened to approx.
60 HRC
• Special tool steel
elephone pliers with cutter to DIN ISO 5745
T
• Half-rounded jaws
• Serrated gripping surfaces
• Cutting edges inductively hardened to approx.
60 HRC
• Special tool steel
Pliers
VDE-insulated telephone pliers
Technical data
Cutting performance
Conductor diameter, max. (H)
Conductor diameter, max. (MH)
Tool data
Cutter hardness
Total length
Weight
Note
mm
mm
HRC
mm
g
FRZ SG 160
1.6
2.5
FRZ SG 200
1.8
2.8
FRZ S 160
1.6
2.5
FRZ S 200
1.8
2.8
60
160
162
60
200
207
60
160
170
60
200
224
(MH) medium-hard wire; (H) hard wire; (P) piano wire
(MH) medium-hard wire; (H) hard wire; (P) piano wire
Ordering data
Version
Type
Qty
Order No.
Type
Qty
Order No.
FRZ SG 160
1
9046390000
FRZ S 160
1
9046370000
FRZ SG 200
1
9046400000
FRZ S 200
1
9046380000
Note
E.5
E
VDE-insulated flat- and round-nose pliers
Pliers
VDE-insulated flat- and round-nose
pliers
p to 1000 V (AC) and 1500 V (DC)
u
protective insulation to IEC 900, DIN EN
60900
• drop-forged from high-quality special tool steels
• safety handle with ergonomic and non-slip TPE
VDE sleeve
• made from shockproof, heat-and cold-resistant,
not readily flammable, cadmium-free TPE
(thermoplastic elastomer)
• elastic grip zone and hard core
• polished surface
• nickel-chromium electrogalvanised coating
protects against corrosion
FZ 160
RZ 160
Flat-nose pliers
Round-nose pliers
lat-nose pliers acc. to DIN ISO 5745
F
• Serrated gripping surface
• With long jaw
ound-nose pliers acc. to DIN ISO 5745
R
• Serrated gripping surface
• With long jaw
E
Technical data
Tool data
Total length
Weight
Note
mm
g
FZ 160
160
163
RZ 160
160
153
Ordering data
Version
Type
FZ 160
Note
E.6
Qty
1
Order No.
Type
9046350000
RZ 160
Qty
1
Order No.
9046360000
E
E.7
Pliers
Introduction
Pliers
ESD pliers
Weidmüller ESD pliers can be used with precision and safety
when working with sensitive electronics. Electrostatic charging
is prevented by the special handle material.
E
Electrostatic discharges (ESD) present a danger to electronics
that should not be underestimated. The transferral or discharge
of an electrostatic charge can cause significant damage.
Charges smaller than 100 volts can cause damage to sensitive
components. However, ESD with voltages under 2000 volts can
not be felt by humans. When working with components which
are particularly sensitive to electrostatic discharges, you need an
electrostatic-free work environment and the properly designed
tools.
The ESD pliers are particularly suited for use with electronics,
including electronic switches and components, as well as with
precision mechanics. All pliers feature an ESD-protected
two-coloured double-component plastic hand grip. The grip
material in use complies with all of the requirements for ESD
hand-tool protection for working with ESD-sensitive components.
The 120 mm-long ESD pliers are available individually or as part
of a four-piece set: diagonal-cutting pliers, angle-cutting pliers,
with pointed head, flat-nose pliers and snipe-nosed pliers. ESD
pliers are not appropriate for working with live components or
component assemblies.
ESD pliers
Electronic ESD diagonal-cutting pliers with
pointed head
• Hard wire (spring wire or steel nails):
0.4 mm/AWG 26
• Semi-hard wire (iron or nails):
1.0 mm/AWG 18
• Soft wire (copper or aluminium):
1.5 mm/AWG 15
SEE ESD 125
Electronic ESD diagonal-cutting pliers with
oval head
• Semi-hard wire (iron or nails):
0.8 mm/AWG 20
• Soft wire (copper or aluminium):
1.5 mm/AWG 15
Ordering data
Type
Qty
SEE ESD 120
1
Order No.
9205130000
Technical data
Weight
90 g
Pliers
SEE ESD 120
Ordering data
Type
Qty
SEE ESD 125
1
Order No.
9204750000
Technical data
Weight
90 g
E
FZE ESD 130
Electronic ESD flat-nosed pliers
Ordering data
Type
Qty
FZE ESD 130
1
Order No.
9204760000
Technical data
Weight
SZE ESD 130
Electronic ESD Snipe-nosed pliers
90 g
Ordering data
Type
Qty
SZE ESD 130
1
Order No.
9204770000
Technical data
Weight
90 g
E.9
ESD pliers
SVSE ESD 130
Pliers
Electronic ESD angle -cutting pliers
• Hard wire (spring wire or steel nails):
0.6 mm/AWG 22
• Semi-hard wire (iron or nails):
1.0 mm/AWG 18
• Soft wire (copper or aluminium):
1.2 mm/AWG 15
SUPER CUT
Electronic diagonal-cutting pliers
• Soft wire (copper or aluminium):
1.2 mm/AWG 15
Ordering data
Type
Qty
SVSE ESD 130
1
Order No.
9205140000
Technical data
Weight
90 g
Ordering data
Type
Qty
SUPER CUT
1
Order No.
9205150000
Technical data
Weight
78 g
E
KOF SET ESD
Electronic ESD case set
Ordering data
Type
Qty
KOF SET ESD
1
Contents:
• Diagonal-cutting pliers
• Snipe-nosed pliers
• Flat-nose pliers
• Angle-cutting pliers
E.10
Technical data
Weight
547 g
Order No.
9205210000
很抱歉,暂时无法提供与“9204770000”相匹配的价格&库存,您可以联系我们找货
免费人工找货