9448010000

    Data sheet RS RS 8AIO DP SD S Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     The analogue interfaces are equipped with SubD connectors. Thus they offer sufficient shielding for analogue signal transmission. They are also equipped with very useful isolators and test sockets for measuring voltage or current. General ordering data   Type Order No. Version GTIN (EAN) Qty.   RS 8AIO DP SD S 9448010000 Interface, RS, 2-wire, Screw connection 4032248253296 1 pc(s). Creation date December 20, 2013 5:35:31 PM CET   Catalogue status / We reserve the right to make technical changes. 1     Data sheet RS RS 8AIO DP SD S   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Length Height   117 mm 72 mm     Width Net weight 87 mm 237 g -20...+50°C   Storage temperature -40...+60 °C No No No         Disconnection per channel Current-measuring testpoint LED status of the supply voltage Common pole polarity No No No Positive or negative can be selected using jumper Connection on control side SUB-D plug, in compliance with IEC 807-2 / DIN 41652 LP2N 5.08mm 2-wire Temperatures   Operating temperature   General data   LED status display per channel Voltage point of measurement Type of test point Power supply fuse   3.15 A Connection data   Connection to PLC Number of poles (control side) Connection supply Protective earth connection     25-pole D-SUB male connector   25-pole plug   LP2N 5.08mm Shielding in SUB-D plug-in   connector Connection (field side) Wiring system   Ratings data   Operating voltage Max. current per channel       Max. current for common pole   3.15 A DIN EN 50178 III 0.8 kV       Rated insulation voltage Pollution severity level Insulation test voltage < 50 V AC 2 0.35 kVAC Screw connection 6 mm² 6 mm² 4 mm² 0.5 mm² AWG 26 0.5 Nm 6 mm                 Clamping range, min. Solid, min. H05(07) V-U Flexible, min. H05(07) V-K Flexible with sleeve, max. Sleeve with plastic collar, max. Max. wire cross-section, AWG [field] Tightening torque, max.   0.13 mm² 0.5 mm² 0.5 mm² 2.5 mm² 2.5 mm² AWG 12 0.6 Nm ≤ 25 V AC / 50 V DC 0.5 A Insulation coordination (EN50178)   According to Surge voltage category Pulse voltage test (1,2/50μs)   Connection field   Type of connection Clamping range, max. Solid, max. H05(07) V-U Flexible, max. H05(07) V-K Flexible with sleeve, min. Min. wire cross-section, AWG [field] Tightening torque, min. Stripping length   Creation date December 20, 2013 5:35:31 PM CET   Catalogue status / We reserve the right to make technical changes. 2     Data sheet RS RS 8AIO DP SD S   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Supply connection   Type of connection Clamping range, max. Solid, max. H05(07) V-U Flexible, max. H05(07) V-K Flexible with sleeve, min. Wire cross-section, min. AWG Tightening torque, min. Stripping length   Screw connection 6 mm² 6 mm² 4 mm² 0.5 mm² AWG 26 0.5 Nm 6 mm                 Clamping range, min. Solid, min. H05(07) V-U Flexible, min. H05(07) V-K Flexible with sleeve, max. Ferrule with plastic collar, max. Wire cross-section, max. AWG Tightening torque, max.   0.13 mm² 0.5 mm² 0.5 mm² 2.5 mm² 2.5 mm² AWG 12 0.6 Nm EC001423 27-24-22-08 27-24-22-08       UNSPSC eClass 6.2   30-21-18-01 27-24-22-08 Classifications   ETIM 3.0 eClass 5.1 eClass 7.1   Product information   Descriptive text technical data   The common C may carry up to 3 A if the external jumpers are not used Approvals   Approvals ROHS   Conform Downloads   EPLAN   9448010000 Creation date December 20, 2013 5:35:31 PM CET   Catalogue status / We reserve the right to make technical changes. 3     Data sheet RS RS 8AIO DP SD S   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date December 20, 2013 5:35:31 PM CET   Catalogue status / We reserve the right to make technical changes. 4