9512200000

    Data sheet W-Series WPE 70N/35 Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com     Product image Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements. General ordering data   Type Order No. Version GTIN (EAN) Qty.   WPE 70N/35 9512200000 PE terminal, Screw connection, 70 mm², 8400 A (70 mm²), green / yellow 4008190403881 10 pc(s). Creation date December 12, 2018 9:50:13 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 1     Data sheet W-Series WPE 70N/35   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights   Width Height Depth Depth including DIN rail   20.5 mm 75 mm 85 mm 86 mm         Width (inches) Height (inches) Depth (inches) Net weight 0.807 inch 2.953 inch 3.346 inch 185.633 g -60 °C   Continuous operating temp., max. 130 °C Lead 7439-92-1     Wemid V-0     Colour   green / yellow DEMKO14ATEX1338U 70 mm² For operating temperature range see EC Design Test Certificate / IEC ExCertificate of Conformity II 2 G D       Certificate No. (IECEX) Wire cross section max. (IECEX) Marking EN 60079-7 IECEXULD14.0005U 70 mm²     Temperatures   Continuous operating temp., min.   Environmental Product Compliance   REACH SVHC   Material data   Material UL 94 flammability rating   Rating data IECEx/ATEX   Certificate No. (ATEX) Wire cross section max. (ATEX) Operating temperature range Ex 2014/34/EU label   Ex eb II C Gb System specifications   Version Tightening torque (clamping screw for copper conductors) Number of potentials No. of clamping points per level Levels cross-connected internally Mounting rail PE function   Screw connection, With PE  connection, closed   8...12 Nm   1   2   No   TS 35   Yes Tightening torque (mounting screw) End cover plate required 2...4 Nm Number of levels Number of potentials per tier PE connection N-function PEN function No 1 1 Yes No Yes Additional technical data   Explosion-tested version Interlock Open sides   Yes for screw fixing closed       Installation advice Number of similar terminals Type of mounting Screwed 1 Screwed 200039-1581431 6 AWG     Wire cross section max. (CSA)   0 AWG CSA rating data   Certificate No. (CSA) Wire cross section min. (CSA)   Creation date December 12, 2018 9:50:13 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 2     Data sheet W-Series WPE 70N/35   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Conductors for clamping (rated connection)   Blade size Clamping range, min. Connection cross-section, stranded, max. Connection direction Number of connections Tightening torque, max. Type of connection Wire connection cross section AWG, min. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. Wire connection cross-section, finely stranded, min. Wire connection cross-section, solid core, min.   S6 (DIN 6911) 16 mm² 95 mm² on side 2 12 Nm Screw connection AWG 6 70 mm² 50 mm² 16 mm² 16 mm²         Clamping range, max. 95 mm² Clamping screw M8 Connection cross-section, stranded, min. 16 mm² Gauge to IEC 60947-1 B11 Stripping length 22 mm Tightening torque, min. 8 Nm Wire connection cross section AWG, max. AWG 2/0 Wire connection cross section, finely stranded, max. 70 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 16 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. 16 mm² Wire connection cross-section, solid core, max. 16 mm²       Centre screw on PE terminals PEN function M5 Yes     Rated voltage to adjoining terminal Volume resistance according to IEC 60947-7-x Pollution severity 1,000 V                 PE rating data   Rated short-time current 8400 A (70 mm²) Tightening torque range for fixing screw 2.0...4.0 Nm   Rating data   Rated cross-section Standards Rated impulse withstand voltage to adjacent terminal   70 mm² IEC 60947-7-2 8 kV   0.17 mΩ 3 UL rating data   Certificate No. (cURus) E60693 Conductor size Factory wiring min. (cURus) 6 AWG Conductor size Field wiring min. (cURus) 6 AWG     Conductor size Factory wiring max. (cURus) 0 AWG Conductor size Field wiring max. (cURus) 0 AWG               ETIM 4.0 ETIM 6.0 eClass 5.1 eClass 7.1 eClass 9.0       Classifications   ETIM 3.0 ETIM 5.0 UNSPSC eClass 6.2 eClass 8.1 eClass 9.1   EC000901 EC000491 30-21-18-11 27-14-03-05 27-14-11-41 27-14-11-41 EC000491 EC000901 27-14-03-05 27-14-03-05 27-14-11-41 Product information   Descriptive text technical data Instructions for accessories   For 50 - 95 mm², the TS 35 x 15 (copper, 2.3 mm thick) mounting rail should be used. Rail holder for protective isolation Installation of the mounting rail "SH 2" Order no. 0494920000 (qty. 10). Creation date December 12, 2018 9:50:13 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 3     Data sheet W-Series WPE 70N/35   Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Approvals   Approvals ROHS   Conform Downloads   Approval/Certificate/Document of Conformity Brochure/Catalogue Engineering Data Engineering Data User Documentation   CFAT_WPE 70N_35.pdf IECEXULD14.0005U_e.pdf DE_PT1002_20160414_263_ISSUE01.pdf ACF-ATEX_4786180920 CAT 1 TERM 16/17 EN EPLAN, WSCAD, Zuken E3.S STEP NTI_IECEx_WDU-WPE 70N 35.pdf Safety note   Safety notice   Safety Information Creation date December 12, 2018 9:50:13 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 4     Data sheet W-Series WPE 70N/35   Drawings Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Creation date December 12, 2018 9:50:13 PM CET   Catalogue status 07.12.2018 / We reserve the right to make technical changes. 5