Data sheet...
W-Series
KDKS 1/PE/35 DB
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
This screw-fitting product portfolio offers space-saving
multi-conductor wiring plus the connection of initiators
and actuators. Identical profiles enable various products
to be combined if necessary, and the use of the same
accessories.
Convenient marking and cross-connection options plus
different variants with LED and diode components round
off the range.
General ordering data
Order No.
Type
Version
GTIN (EAN)
Qty.
9532450000
KDKS 1/PE/35 DB
W-Series, Fuse terminal, Rated cross-section:
4 mm², Screw connection, Polyamide, Direct
mounting
4032248039210
50 pc(s).
Creation date May 6, 2013 3:20:00 PM CEST
Catalogue status 12.03.2013 / We reserve the right to make technical changes.
1
Data sheet...
W-Series
KDKS 1/PE/35 DB
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
Dimensions and weights
Length
Height
91 mm
65 mm
Width
Net weight
8 mm
31.06 g
-50 °C
Storage temperature
Continuous operating temp., max.
100 °C
Installation advice
Open sides
Version
Direct mounting
right
Screw connection,
Fuse isolator, With PE
connection, One end
without connector
Wire cross section max. (CSA)
12 AWG
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, max.
Temperatures
Operating temperature
Continuous operating temp., min.
Additional technical data
Explosion-tested version
Number of similar terminals
Type of mounting
No
1
Snap-on
CSA ratings data
Certificate No. (CSA)
Wire cross section min. (CSA)
12400-281
26 AWG
Clampable wires (additional connection)
Conductor cross-section, flexible plus
plastic collar DIN 46228/1, further
connection, min.
0.5 mm²
4 mm²
Clampable wires (rated connection)
Type of connection
Screw connection
Blade size
0.6 x 3.5 mm
Number of connections
3
Clamping range, rated connection, max. 4 mm²
Tightening torque, min.
0.5 Nm
Torque level with DMS electric
screwdriver
2
Wire connection cross section, solid
core, max. rated connection
0.5 mm²
Wire connection cross section, stranded,
rated connection, min.
1.5 mm²
Wire connection cross section, finely
stranded, max.
4 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, min.
0.5 mm²
Wire connection cross section AWG,
min.
AWG 22
Stripping length
Connection direction
Clamping range, rated connection, min.
Clamping screw
Tightening torque, max.
Gauge to IEC 60947-1
9 mm
on side
0.33 mm²
M3
1 Nm
Rated voltage
Rated current
Standards
500 V
6.3 A
IEC 60947-7-1 (-7-2)
A3
Wire connection cross section, solid
core max. rated connection
4 mm²
Wire connection cross section, stranded,
rated connection, max.
4 mm²
Wire connection cross-section, finely
stranded, min.
0.5 mm²
Wire connection cross section, finely
stranded with wire-end ferrules DIN
46228/1, rated connection, max.
4 mm²
Wire connection cross section AWG,
max.
AWG 12
Rated data
Rated cross-section
Rated impulse withstand voltage
Current at maximum wires
Pollution severity
4 mm²
6 kV
6.3 A
3
Creation date May 6, 2013 3:20:00 PM CEST
Catalogue status 12.03.2013 / We reserve the right to make technical changes.
2
Data sheet...
W-Series
KDKS 1/PE/35 DB
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 16
D-32758 Detmold
Germany
Fon: +49 5231 14-0
Fax: +49 5231 14-292083
www.weidmueller.com
Technical data
UL ratings data
Certificate No. (UR)
E60693VOL1SEC18
Conductor size Factory wiring min. (UR) 26 AWG
Conductor size Factory wiring max. (UR) 12 AWG
Conductor size Field wiring max. (UR) 12 AWG
Polyamide
Beige
Material
UL 94 flammability rating
PA 66
V-0
W-Series
on side
3
Yes
Type of connection
Number of levels
Levels cross-connected internally
Screw connection
2
No
EC000903
30-21-18-11
27-14-11-28
27-14-11-28
ETIM 3.0
eClass 4.1
eClass 6.2
EC000899
27-14-11-28
27-14-11-28
Material data
Insulating material
Colour
System specifications
Product family
Connection direction
Number of connections
End cover plate required
Classifications
ETIM 2.0
UNSPSC
eClass 5.1
eClass 7.1
Approvals
Approvals
ROHS
Conform
Creation date May 6, 2013 3:20:00 PM CEST
Catalogue status 12.03.2013 / We reserve the right to make technical changes.
3