ESDA6V1-5P6

ESDA6V1-5P6 5-Line TVS Array P b Lead(Pb)-Free Features: * Monolithic Structure * Low Clamping Voltage * IEC Compatibility(EN6100-4) 61000-4-2(ESD): Air–15kV, Contact-8kV * MIL STD 883E-Method 3015-7: class 3 25kV HBM(Human Body Model) * Low Leakage Current * 5 Unidirectional Lines Main Applications: * Computer Notebooks * Communication Systems & Cellular Phones * Printers * Personal Digital Assistant(PDA) * Video Equipment Mechanical Characteristics: * Molded JEDEC SOT-563 Package * Weight 3 milligrams Power Dissipation 150m Watts Reverse Working Voltage 6.1 VOLTS 6 1 5 4 2 3 SOT-563 SOT-563 Outline Dimensions D Unit:mm K 4 SOT-563 Dim A B C D G J K S Min Max 1.50 1.70 1.10 1.30 0.50 0.60 0.17 0.27 0.50 REF 0.08 0.16 0.10 0.30 1.50 1.70 6 5 B 1 2 3 S G A J C WEITRON http://www.weitron.com.tw 1/7 Rev.B 02-Apr-09 ESDA6V1-5P6 Maximum Ratings (TA=25°C unless otherwise noted) Parameter Power Dissipation Symbol PPP Value 150 Units mW kV °C/W °C °C IEC61000-4-2 Air(ESD) IEC61000-4-2 Contact(ESD) Junction to ambient Operating Temperature Storage Temperature ESD R θ JA TJ TSTG 15 8 220 -55 to +125 -55 to +150 ELECTRICAL CHARACTERISTICS Parameter Breakdown Voltage Rev erse Leakage Current Dynamic Resistance Capacitance VR=0V,f=1MHz IT=1mA VRW M=5V Symbol VBR IR Rd CJ Min 6.1 T yp 1.1 7 Max 1.0 Unit V µA Ω pF Device Marking Item ESDA6V1-5P6 Marking EC Eqivalent Circuit diagram 1 2 3 6 5 4 ELECTRICALCHARACTERISTICS(Tamb = 25°C) Symbol VRM VBR VCL IRM IPP α T VF C Rd Parameter Stand-off voltage Breakdown voltage Clamping voltage Leakage current Peak pulse current Voltage tempature coefficient Forward voltage drop Capacitance per line Dynamic resistance Slope: 1/Rd IPP VCL VBR VRM IRM VF V IF I http://www.weitron.com.tw WEITRON 2/7 Rev.B 02-Apr-09 ESDA6V1-5P6 PPP[Tj initial] / PPP[Tj initial=25°C) PPP(W) 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 0 25 50 75 100 125 150 Tj(°C) 1000 Tj initial=25°C 100 Tp(µ s) 10 1 10 100 Fig. 1: Relative variation of peak pulse power versus initial junction temperature. Fig. 2: Peak pulse power versus exponential pulse duration. IPP(A) 100.0 tp=2.5µs Tj initial=25°C 10.0 1.0 VCL(V) 0.1 0 10 20 30 40 50 60 70 Fig. 3: Pulse Wave Form Fig. 4: Clamping voltage versus peak pulse current (typical values, rectangular waveform). IFM(A) C(pF) 1.E+00 8 7 Tj=125°C F=1MHz VOSC=30mVRMS Tj=25°C 6 5 4 Tj=25°C 1.E-01 1.E-02 3 2 1 VFM(V) 1.E-03 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 0 1 2 VR(V) 3 4 5 6 Fig. 5: Forward voltage drop versus peak forward current (typical values). Fig. 6: Junction capacitance versus reverse voltage applied (typical values). WE ITR O N h t t p : / / w w w . w e i t r o n . c o m . tw 3/7 Rev.B 02-Apr-09 ESDA6V1-5P6 Tape & Reel and Packaging Specifications Embossed Tape and Reel is used to facilitate automatic pick and place equipment feed requirements. The tape is used as the shipping container for various products and requires a minimum of handling. The antistatic/conductive tape provides a secure cavity for the product when sealed with the “peel–back” cover tape. • Used for Automatic Pick and Place Feed Systems • Minimizes Product Handling • EIA 481, –1, –2 • SOT–23, SC–70/SOT–323, S C–89 , S C–88/ SO T–36 3 , S C–88 A / SO T– 3 5 3 , SOT-563 SOD –323, SOD -523 in 8 mm Tap e Use the standard device title and add the required suffix as listed in the option table below (Table 1). Note that the individu al reels have a finite number of devices depending on the type of product contained in the tape. Also note the minimum lot size is one full reel for each line item, and orders are required to be in increments of the single reel quantity. SOD-323 8 mm SC-59, SC-70, SC-75,SOT-23 8 mm SC-88, SOT-363, SOT-563 8 mm SC-88A, SOT-353 8 mm Direction of Feed Typical Reel Orientations Table 1. EMBOSSED TAPE AND REEL ORDERING INFORMATION Tape Width (mm) Pitch mm Reel Size mm(inch) Devices Per Reel and Minimum Order Quantity SO T –23 8 4 178 (7 ) 3,000 Device Suffix Package SC–70/SOT–323 SC–89 8 4 178 (7 ) 3,000 8 4 178 (7 ) 3,000 SC–88/SOT-363 8 4 178 (7 ) 3,000 SOT-563 8 4 178 (7 ) 3,000 SC–88A/SOT-353 8 4 178 (7 ) 3,000 SOD-323 8 4 178 (7 ) 3,000 SOD-523 8 4 178 (7 ) 3,000 WEITRON http://www.weitron.com.tw 4/7 Rev.B 02-Apr-09 ESDA6V1-5P6 EMBOSSED TAPE AND REEL DATA FOR DISCRETES CARRIER TAPE SPECIFICATIONS K t Top Cover Tape B1 K0 See Note 1 D A0 F B0 P Embossmen t Center Lines of Cavity D1 For Components 2.0mm x 1.2mm and Larger W P0 P2 10 P i t ches C umula t ive Tolerance o n Tape ± 0.2mm( ± 0.008’’ ) E For Machine Reference Only Including Draft and RADII Concentric Around B0 User Direction of Feed *Top Cover Tape Thickness( t 1 ) 0.10m m (0.004’’ )Max. R Min Bar Code Label Tape and Components Shall Pass Around Bending Radius 10 o Radius “R” Without Damage Maximum Component Rotation Typical Component Cavity Center Line Embossed Carrier 100 mm (3.937 ’’) 1 mm Max Tape 1 mm(.039’’ ) Max 250 mm (9.843’’) Embossmen t Typical Component Center Line Camber (Top View) Allowable Camber To Be 1 mm/100 mm Nonaccumulative Over 250 mm DIMENSIONS Tape Size 8m m B1 Max 4.55mm (.179’’) 8.2mm (.323’’) 1 2.1m m (.476’’) 2 0.1m m (.791’’) - 0.0 D 1.5+0.1mm D1 1.0Min (.039’’) 1.5mmMin (.060’’) E 1.75 ± 0.1mm (.069 ± .004) F 3 . 5 ± 0 . 05m m (.138±.002’’) 5 . 5 ± 0 . 05m m (.217 ± .002’’ ) 7 . 5 ± 0 . 10m m (.295 ± .004’’ ) 11 . 5 ± 0 . 1m m (.453 ± .004’’ ) K P0 (.157 ± . 004’’ ) P2 2.0 ± 0.1mm (.079 ± .002’’) RMin TMax 25mm (.98’’) 30mm (1.18’’) 0.6mm (.024’’) WMax 8.3mm (.327’’) 12 ± .30mm (.470 ± .012’’) 16.3mm (.642’’) 24.3mm (.957’’) 2.4mm Max 4.0 ± 0 .1m m (.094’’) 6.4mm Max (.252’’) 7.9mm Max (.311’’) 11.9mmMax (.468’’) (.059+.004’’ - 0 .0 ) 12m m 16m m 24m m Metric dimensions govern - English are in parentheses for reference only. NOTE 1: A 0 , B 0 , and K 0 are determined by component size. The clearance between the components and the cavity must be within .05 mm min. to.50 mm max., NOTE 2: the component cannot rotate more than 10 within the determined cavity. NOTE 3: If B1 exceeds 4.2 mm (.165”) for 8 mm embossed tape, the tape may not feed through all tape feeders. o WE ITR O N h t t p : / / w w w . w e i t r o n . c o m . tw 5/7 Rev.B 02-Apr-09 ESDA6V1-5P6 EMBOSSED TAPE AND REEL DATA FOR DISCRETES T Max Outside Dimension Measured at Edge 1.5mm Min (.06’’) A 20.2mm Min (.795’’) 13.0mm ± 0.5mm (.512 ±.002’’) 50mm Min (1.969’’) Full Radius G Inside Dimension Measured Near Hub Size 8 mm 12mm 16mm 24 mm A Max 330mm (12.992’’) 330mm (12.992’’) 360mm (14.173’’) 360mm (14.173’’) G 8.4mm+1.5mm, -0.0 (.33’’+.059’’, -0.00) 12.4mm+2.0mm, -0.0 (.49 ’’+ .079’’, -0.00) 16.4mm+2.0mm, -0.0 (.646’’+.078’’, -0.00) 24.4mm+2.0mm, -0.0 (.961’’+.070’’, -0.00) T Max 14.4mm (.56’’) 18.4mm (.72’’) 22.4mm (.882’’) 30.4mm (1.197’’) Reel Dimensions Metric Dimensions Govern –– English are in parentheses for reference only Storage Conditions Temperature: 5 to 40 Deg.C (20 to 30 Deg. C is preferred) Humidity: 30 to 80 RH (40 to 60 is preferred ) Recommended Period: One year after manufacturing (This recommended period is for the soldering condition only. The characteristics and reliabilities of the products are not restricted to this limitation) WE ITR O N http://www.weitron.com.tw 6/7 Rev.B 02-Apr-09 ESDA6V1-5P6 Shipment Specification LABEL LABEL LABEL 10Reel/Inner Box 30KPCS/Inner Box Dim(Unit:mm) 150mm*200mm*200mm 10 Reel 3000PCS/Reel Dim(Unit:mm) 400mm*300mm*410mm LABEL MARK 8 Inner Box/Carton 240KPCS/Carton WEITRON http://www.weitron.com.tw 7/7 Rev.B 02-Apr-09