FM4001M

FM4001M thru FM4007M Surface Mount Standard Recovery Glass Passivated Rectifiers REVERSE VOLTAGE 50 TO 1000 VOLTS FORWARD CURRENT 1.0 AMPERE Features: *For Surface Mount Application *Glass Passivated Chip *Low Reverse Leakage Current *Low Forward Voltage Drop And High Current Capability *Plastic Meterial Has UL Flammability Classification 94V-0 Mechanical Data: * Case: Molded Plastic, MINI-SMA(Similar to SOD-123F) * Terminals: Solder Plated, Solderable per ML-STD-750 Medthod 2026 * Polarity: Indicated by Cathode Band * Wight: 0.040 grams MINI-SMA (SOD-123F) MINI-SMA Outline Dimension unit:mm B C A MINI-SMA Dim A B C E H J Min 1.40 3.70 2.80 1.40 Max 1.80 4.10 0.30(TYP) 3.20 0.90(TYP) 1.60 E J H H WEITRON http://www.weitron.com.tw FM4001M thru FM4007M Maximum Ratings and Electrical Characteristics Rating 25 C Ambient Temperature Unless Otherwise Specified. Single Phase Half Wave, 60Hz , Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Characteristics Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA=75 C Peak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous At 1.0A DC Maximum DC Reverse Current @TA=25 C At Rated DC Blocking Voltage @TA=100 C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range Symbol FM VRRM VRMS VDC IF(AV) 50 35 50 FM FM FM FM FM FM 4001M 4002M 4003M 4004M 4005M 4006M 4007M Unit 100 70 100 200 140 200 400 280 400 1.0 600 420 600 800 1000 560 800 700 1000 V V V A IFSM VF IR CJ R JA TJ TSTG 30 1.10 5.0 50 15(TYP) 60(TYP) -55 to+150 -55 to+150 A V uA PF C/W C C NOTES: 1.Measured at 1.0MHz applied reverse voltage of 4.0V DC. 2.Thermal Resistance Junction to Ambient. Device Marking Item FM4001M FM4002M FM4003M FM4004M Marking A1 A2 A3 A4 Item FM4005M FM4006M FM4007M Marking A5 A6 A7 WEITRON http://www.weitron.com.tw FM4001M thru FM4007M FIG.1-TYPICAL FORWARD CHARACTERISTICS AVERAGE FORWARD CURRENT,(A) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 180 200 Single Phase Half Wave 60Hz Resistive Or Inductive Load 50 I NS TANTANEOUS FORWARD CURRENT,(A) 10 3.0 1.0 Tj=25 C Pulse Width 300us 1% Duty Cycle AMBIENT TEMPERATURE ( C) 0.1 FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT .6 .7 .8 .9 1.0 1.1 1.2 1.3 P EAK FORWAARD S URGE CURRENT,(A) .01 50 FORWARD VOLTAGE,(V) 40 30 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 20 FIG.3 - TYPICAL REVERSE CHARACTERISTICS 100 10 0 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz 10 REVERS E LEAKAGE CURRENT, (m ) A Tj=100 C FIG.5-TYPICAL JUNCTION CAPACITANCE 35 30 25 20 15 10 5 1.0 .1 Tj=25 C .01 0 20 40 60 80 100 120 140 JUNCTION CAPACITANCE,(pF) 0 .01 .05 .1 .5 1 5 10 50 100 PERCENTAGE RATED PEAK REVERSE VOLTAGE REVERSE VOLTAGE,(V) WEITRON http://www.weitron.com.tw