MSD601

MSD601 NPN General Purpose Transistors P b Lead(Pb)-Free 1 2 3 SOT-23 MAXIMUM RATINGS(Ta=25°C) Rating Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous Collector Current - Peak Total Device Dissipation TA=25°C Junction Temperature Storage Temperature Symbol VCEO VCBO VEBO IC IC(P) PD Tj Tstg Value 50 60 7.0 100 200 0.2 +150 -55 to +150 Unit V V V mA mA mW °C °C WEITRON http://www.weitron.com.tw 1/6 18-Sep-06 MSD601 ELECTRICAL CHARACTERISTICS Characteristics Collector-Emitter Breakdown Voltage IC = 2.0mA, IE = 0A Collector-Base Breakdown Voltage IC = 10µA, IB = 0A Emitter-Base Breakdown Voltage IE= 10µA, I C=0 Collector Cutoff Current VCB = 45V, I C = 0A Emitter Cutoff Current VEB = 10V, I C = 0A Symbol V(BR)CEO V(BR)CBO V(BR)EBO ICBO ICEO Min 50 60 Typ - Max - Unit V V 7.0 - - 0.1 0.1 V µA µA ON CHARACTERISTICS Collector-Emitter Saturation Voltage IC = 100mA, I B = 10mA DC Current Transfer Ration1 VCE =2.0V, IC = 100mA 1.Pulse Test : Pulse Width ≤ 300µs, D.C. ≤ 2% VCE(sat) 0.5 V hFE 90 - - CLASSIFICATION hFE @VCE = 10V, I C = 2.0mA Rank Range Marking R 210-340 YR S 290-460 YS WEITRON http://www.weitron.com.tw 2/6 18-Sep-06 MSD601 SOT-23 Outline Dimension A Unit:mm SOT-23 B C TOP VIEW D E G H K J L M Dim A B C D E G H J K L M Min 0.35 1.19 2.10 0.85 0.46 1.70 2.70 0.01 0.89 0.30 0.076 Max 0.51 1.40 3.00 1.05 1.00 2.10 3.10 0.13 1.10 0.61 0.25 0.95 0.95 2.0 0.9 0.8 WEITRON http://www.weitron.com.tw 3/6 18-Sep-06 MSD601 Tape & Reel and Packaging Specifications for Small-Signal Transistors, FETs and Diodes Embossed Tape and Reel is used to facilitate automatic pick and place equipment feed requirements. The tape is used as the shipping container for various products and requires a minimum of handling. The antistatic/conductive tape provides a secure cavity for the product when sealed with the “peel–back” cover tape. • Two Reel Sizes Available (7"and 13",) • SOT–23, SC–70/SOT–323, • Used for Automatic Pick and Place Feed Systems SC–89, SC–88/SOT–363,SC–88A/SOT–353, • Minimizes Product Handling SOD–323, SOD-523 in 8 mm Tape • EIA 481, –1, –2 Use the standard device title and add the required suffix as listed in the option table below (Table 1). Note that the individual reels have a finite number of devices depending on the type of product contained in the tape. Also note the minimum lot size is one full reel for each line item, and orders are required to be in increments of the single reel quantity. SOD-323 8 mm SC-59, SC-70, SC-75,SOT-23 8 mm SC-88, SOT-363 T1 Orientation 8 mm SC-88A, SOT-353 T1 Orientation 8 mm Direction of Feed Typical Reel Orientations Table 1. EMBOSSED TAPE AND REEL ORDERING INFORMATION Package Tape Width (mm) 8 8 SC–70/SOT–323 SC–89 8 8 8 8 SC–88/SOT-363 8 8 SC–88A/SOT-353 SOD-323 8 8 8 8 SOD-523 8 8 Pitch mm 4 4 4 4 4 4 4 4 4 4 4 4 4 4 Reel Size mm(inch) 178 330 178 330 178 330 178 330 178 330 178 330 178 330 Devices Per Reel and Minimum Order Quantity SOT–23 (7) (13) (7) (13) (7) (13) (7) (13) (7) (13) (7) (13) (7) (13) 3,000 10,000 3,000 10,000 3,000 10,000 3,000 10,000 3,000 10,000 3,000 10,000 3,000 10,000 Device Suffix WEITRON http://www.weitron.com.tw 4/6 18-Sep-06 MSD601 EMBOSSED TAPE AND REEL DATA FOR DISCRETES CARRIER TAPE SPECIFICATIONS K t D P0 P2 E Top Cover Tape A0 B0 P # Note 1 Embossment Center Lines of Cavity D1 For Components 2.0 mm x 1.2 mm and Larger 10 Pitches Cumulative Tolerance on Tape ±0.2 mm F W B1 K0 User Direction of Feed FOR MACHINE REFERENCE ONLY0 INCLUDING DRAFT AND RADII CONCENTRIC AROUND B 0 R Min Barcode Label Tape and Components Shall Pass Around Radius “R” Without Damage Bending Radius 10° Maximum Component Rotation Typical Component Cavity Center Line 1 mm Max Typical Component Center Line 100 mm 1 mm Max Embossed Carrier Top Cover Tape Thickness 0.10 mm Max. Embossment Tape 250 mm Camber (Top View) Allowable Camber To Be 1 mm/100 mm Nonaccumulative Over 250 mm DIMENSIONS Size 8mm 12mm 16mm 24mm B1 Max #(Note 2) D -0.0 D1 1.0 Min 1.5 mm Min E F K 2.4 mm Max 6.4 mm Max 7.9 mm Max P0 P2 R Min 25 mm 30 mm T Max 0.6 mm W Max 8.3 mm 12±0.3 mm 16.3 mm 24.3 mm 4.55 mm 1.5+0.1 mm 8.2 mm 12.1 mm 20.1 mm 1.75±0.1 mm 3.5±0.05 mm 5.5±0.05 mm 7.5±0.10 mm 4.0±0.1 mm 2.0±0.1 mm 11.5±0.1 mm 11.9 mm Max Metric dimensions govern - English are in parentheses for reference only. NOTE 1: A 0, B 0 , and K 0 are determined by component size. The clearance between the components and the cavity must be within .05 mm min. to.50 mm max., NOTE 2: the component cannot rotate more than 10 o within the determined cavity. NOTE 3: If B1 exceeds 4.2 mm for 8 mm embossed tape, the tape may not feed through all tape feeders. WEITRON http://www.weitron.com.tw 5/6 18-Sep-06 MSD601 EMBOSSED TAPE AND REEL DATA FOR DISCRETES D (MEASURED AT HUB) E (MEASURED AT OUTER EDGE) 20.2 MIN 330.0 MAX 13.2 to 12.8 (ARBOR HOLE) A (HUB DIA) DETAIL A 3.5 to 2.5 TAPE START SLOT C (MEASURED AT INNER HUB) 1. 6 DETAIL A Reel Diameter 178.0 330.0 Tape Size 8.0 8.0 A Min 50.0 50.0 Max Min 8.4 8.4 C Max 9.9 9.9 D (Max) 14.4 14.4 E (Max) 10.9 10.9 Metric Dimensions Govern - English are in parentheses for reference only Reel Dimensions Storage Conditions Temperature: 5 to 40 Deg.C (20 to 30 Deg. C is preferred) Humidity: 30 to 80 RH (40 to 60 is preferred ) Recommended Period: One year after manufacturing (This recommended period is for the soldering condition only. The characteristics and reliabilities of the products are not restricted to this limitation) WEITRON http://www.weitron.com.tw 6/6 18-Sep-06