S1M

S1A thru S1M Surface Mount Standard Recovery Glass Passivated REVERSE VOLTAGE 50 TO 1000 VOLTS FORWARD CURRENT 1.0 AMPERE Features: *For Surface Mount Application *Glass Passivated Chip *Low Reverse Leakage Current *Low Forward Voltage Drop And High Current Capability *Plastic Meterial Has UL Flammability Classification 94V-0 Mechanical Data *Case : Molded Plastic *Polarity :Indicated by cathode band *Weight : 0.002 Ounce ,0.064 grams SMA(DO-214AC) SMA Outline Dimension B Unit:mm A C D J H E G Dim A B C D E G H J SMA Min 2.20 4.00 1.27 0.15 4.48 0.10 0.76 1.70 Max 2.92 4.60 1.63 0.31 5.59 0.20 1.52 2.62 WEITRON http://www.weitron.com.tw S1A thru S1M Maximum Ratings and Electrical Characteristics Rating 25 C Ambient Temperature Unless Otherwise Specified. Single Phase Half Wave, 60Hz , Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Characteristics Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TC=100 C Peak Forward Surge Current, 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) Maximum Instantaneous At 1.0A DC Maximum DC Reverse Current @Tj=25 C At Rated DC Blocking Voltage @Tj=125 C Typical Junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range Symbol S1A S1B VRRM VRMS VDC IF(AV) 50 35 50 100 70 100 S1D S1G S1J S1K S1M Unit 200 140 200 400 280 400 1.0 600 420 600 800 1000 560 800 700 1000 V V V A IFSM VF IR CJ R θJL TJ TSTG 30 1.10 5.0 100 10 30 -55 to+150 -55 to+150 A V uA PF C/W C C NOTES: 1.Measured at 1.0MHz applied reverse voltage of 4.0V DC. 2.Thermal Resistance Junction to case. WEITRON http://www.weitron.com.tw S1A thru S1M AVERAGE FORW ARD CURRENT AMPERES 1.0 PEAK FORW ARD SURGE CURRENT, AMPERES 30 0.8 0.6 20 0.4 10 Pulse W idth 8.3ms Single Half-Sine-W ave (JEDEC METHOD) 0.2 0 25 SINGLE PHASE HALF W AVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0 1 2 5 10 20 50 100 50 75 100 125 150 175 LEAD TEMPERATURE , C NUMBER OF CYCLES AT 60Hz FIG.1 Forward Current Derating Curve FIG.2 Maximum Non-Pepetitive Surge Current 10 1000 INSTANTANEOUS FORW ARD CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, (uA) 100 TJ = 125 C 1.0 10 TJ = 25 C 1.0 TJ = 25 C 0.1 0.1 PULSEWIDTH:300us .01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.01 0 20 40 60 80 100 120 140 INSTANTANEOUS FORW ARD VOLTAGE, (VOLTS) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.3 Typcial Forward Characteristics FIG.4 Typical Reverse Characteristics WEITRON http://www.weitron.com.tw