SS7A-02-10K-CG

Surface Mount SOIC Resistor Networks SOIC Series • Tested for COTS applications • Both narrow and wide body versions available • Standard JEDEC 8, 14, 16, and 20 pin packages • Ultra-stable TaNSil® resistors on silicon substrates • Standard Sn/Pb and Pb-free terminations available Welwyn Components IRC’s TaNSil® SOIC resistor networks are the perfect solution for high volume applications that demand a small wiring board footprint. The .050” lead spacing provides higher lead density, increased component count, lower resistor cost, and high reliability. The tantalum nitride film system on silicon provides precision tolerance, exceptional TCR tracking, low cost and miniature package. Excellent performance in harsh, humid environments is a trademark of IRC’s self-passivating TaNSil® resistor film. The SOIC series is ideally suited for the latest surface mount assembly techniques and each lead can be 100% visually inspected. The compliant gull wing leads relieve thermal expansion and contraction stresses created by soldering and temperature excursions. For applications requiring high performance resistor networks in a low cost, surface mount package, specify IRC SOIC resistor networks. Electrical Data Resistance Range Absolute Tolerance Ratio Tolerance to R1 Absolute TCR Tracking TCR Element Power Rating @ 70°C Isolated Schematic Bussed Schematic Power Rating @ 70°C SOIC-N Package Power Rating @ 70°C SOIC-W Package Rated Operating Voltage ________________ (not to exceed √ Power X Resistance) Operating Temperature Noise General Note Environmental Data 10 - 250KW To ±0.1% To ±0.05% To ±25ppm/°C To ±5ppm/°C 100mW 50mW 8-Pin 14-Pin 16-Pin 16-Pin 20-Pin 400mW 700mW 800mW 1.2W 1.5W Test Per MIL-PRF-83401 Thermal Shock Power Conditioning High Temperature Exposure Short-time Overload Low Temperature Storage Life Typical Delta R ±0.02% ±0.03% ±0.03% ±0.02% ±0.03% ±0.05% Max Delta R ±0.1% ±0.1% ±0.05% ±0.05% ±0.05% ±0.1% 100 Volts -55°C to ±125°C