W25X20AVSNIG

W25X10A, W25X20A, W25X40A, W25X80A 1M-BIT, 2M-BIT, 4M-BIT AND 8M-BIT SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL OUTPUT SPI -1- Publication Release Date: February 27, 2008 Revision B W25X10A, W25X20A, W25X40A, W25X80A Table of Contents 1. 2. 3. 4. 5. 6. 7. GENERAL DESCRIPTION ......................................................................................................... 4 FEATURES ................................................................................................................................. 4 PIN CONFIGURATION SOIC 150-MIL....................................................................................... 5 PIN CONFIGURATION SOIC 208-MIL....................................................................................... 5 PIN CONFIGURATION PDIP 300-MIL ....................................................................................... 5 PAD CONFIGURATION WSON 6X5-MM .................................................................................. 6 PIN DESCRIPTION..................................................................................................................... 6 7.1 7.2 7.3 7.4 7.5 7.6 7.7 8. 9. Package Types ............................................................................................................... 7 Chip Select (/CS) ............................................................................................................ 7 Serial Data Output (DO) ................................................................................................. 7 Write Protect (/WP)......................................................................................................... 7 HOLD (/HOLD) ............................................................................................................... 7 Serial Clock (CLK) .......................................................................................................... 7 Serial Data Input / Output (DIO) ..................................................................................... 7 BLOCK DIAGRAM ...................................................................................................................... 8 FUNCTIONAL DESCRIPTION ................................................................................................... 9 9.1 SPI OPERATIONS ......................................................................................................... 9 9.1.1 9.1.2 9.1.3 SPI Modes........................................................................................................................9 Dual Output SPI................................................................................................................9 Hold Function ...................................................................................................................9 Write Protect Features....................................................................................................10 9.2 10. WRITE PROTECTION.................................................................................................. 10 9.2.1 CONTROL AND STATUS REGISTERS................................................................................... 11 10.1 STATUS REGISTER .................................................................................................... 11 10.1.1 10.1.2 10.1.3 10.1.4 10.1.5 10.1.6 10.1.7 BUSY............................................................................................................................11 Write Enable Latch (WEL) ............................................................................................11 Block Protect Bits (BP2, BP1, BP0)..............................................................................11 Top/Bottom Block Protect (TB).....................................................................................11 Reserved Bits ...............................................................................................................11 Status Register Protect (SRP) ......................................................................................12 Status Register Memory Protection ..............................................................................13 Manufacturer and Device Identification.........................................................................14 Instruction Set...............................................................................................................15 Write Enable (06h)........................................................................................................16 Write Disable (04h).......................................................................................................16 Read Status Register (05h) ..........................................................................................17 10.2 INSTRUCTIONS........................................................................................................... 14 10.2.1 10.2.2 10.2.3 10.2.4 10.2.5 -2- W25X10A, W25X20A, W25X40A, W25X80A 10.2.6 10.2.7 10.2.8 10.2.9 10.2.10 10.2.11 10.2.12 10.2.13 10.2.14 10.2.15 10.2.16 10.2.17 Write Status Register (01h) ..........................................................................................18 Read Data (03h) ...........................................................................................................19 Fast Read (0Bh) ...........................................................................................................20 Fast Read Dual Output (3Bh) .......................................................................................21 Page Program (02h) ...................................................................................................22 Sector Erase (20h) .....................................................................................................23 Block Erase (D8h) ......................................................................................................24 Chip Erase (C7h)........................................................................................................25 Power-down (B9h) ......................................................................................................26 Release Power-down / Device ID (ABh) .....................................................................27 Read Manufacturer / Device ID (90h) .........................................................................29 JEDEC ID (9Fh)..........................................................................................................30 11. ELECTRICAL CHARACTERISTICS......................................................................................... 31 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 11.10 11.11 Absolute Maximum Ratings .......................................................................................... 31 Operating Ranges......................................................................................................... 31 Endurance and Data Retention .................................................................................... 32 Power-up Timing and Write Inhibit Threshold .............................................................. 32 DC Electrical Characteristics ........................................................................................ 33 AC Measurement Conditions........................................................................................ 34 AC Electrical Characteristics ........................................................................................ 35 AC Electrical Characteristics (cont’d) ........................................................................... 36 Serial Output Timing ..................................................................................................... 37 Input Timing................................................................................................................. 37 Hold Timing ................................................................................................................. 37 8-Pin SOIC 150-mil (Package Code SN)...................................................................... 38 8-Pin SOIC 208-mil (Package Code SS)...................................................................... 39 8-Pin PDIP 300-mil (Package Code DA) ...................................................................... 40 8-Pad WSON 6x5mm (Package Code ZP) .................................................................. 41 8-Pad WSON 6x5mm Cont’d........................................................................................ 42 12. PACKAGE SPECIFICATION .................................................................................................... 38 12.1 12.2 12.3 12.4 12.5 13. 14. ORDERING INFORMATION .................................................................................................... 43 REVISION HISTORY ................................................................................................................ 45 -3- Publication Release Date: February 27, 2008 Revision B W25X10A, W25X20A, W25X40A, W25X80A 1. GENERAL DESCRIPTION The W25X10A (1M-bit), W25X20A (2M-bit), W25X40A (4M-bit) and W25X80A (8M-bit) Serial Flash memories provide a storage solution for systems with limited space, pins and power. The 25X series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code download applications as well as storing voice, text and data. The devices operate on a single 2.7V to 3.6V power supply with current consumption as low as 5mA active and 1µA for power-down. All devices are offered in space-saving packages. The W25X10A/20A/40A/80A array is organized into 512/1024/2048/4096 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time using the Page Program instruction. Pages can be erased in groups of 16 (sector erase), groups of 256 (block erase) or the entire chip (chip erase). The W25X10A/20A/40A/80A has 32/64/128/256 erasable sectors and 2/4/8/16 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage. (See figure 2.) The W25X10A/20A/40A/80A supports the standard Serial Peripheral Interface (SPI), and a high performance dual output SPI using four pins: Serial Clock, Chip Select, Serial Data I/O and Serial Data Out. SPI clock frequencies of up to 100MHz are supported allowing equivalent clock rates of 200MHz when using the Fast Read Dual Output instruction. These transfer rates are comparable to those of 8 and 16-bit Parallel Flash memories. A Hold pin, Write Protect pin and programmable write protect, with top or bottom array control features, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device identification. 2. FEATURES • Family of Serial Flash Memories – W25X10A: 1M-bit / 128K-byte (131,072) – W25X20A: 2M-bit / 256K-byte (262,144) – W25X40A: 4M-bit / 512K-byte (524,288) – W25X80A: 8M-bit / 1M-byte (1,048,576) – 256-bytes per programmable page – Uniform 4K-byte Sectors / 64K-byte Blocks • SPI with Single or Dual Outputs – Clock, Chip Select, Data I/O, Data Out – Optional Hold function for SPI flexibility • Data Transfer up to 200M-bits / second – Clock operation to 100MHz – Fast Read Dual Output instruction – Auto-increment Read capability • Flexible Architecture with 4KB sectors – Sector Erase (4K-bytes) – Block Erase (64K-byte) – Page program up to 256 bytes