WSH201

WSH201 Linear Hall Effect Sensor IC Features: Wide operating range 2.2~12V, -20℃~100℃ Flat Response to 16kHz Low operating current 3mA High Sensitivity on different supplied voltage Sensitivity: 10mV/Guass (Differential output) on 3V Sensitivity: 20mV/Guass (Differential output) on 5V Two package styles TO-94/SOT-25 available. Functional Description : The W201 integrates Hall sensing element, linear amplifer, sensitivity controller and emitter follower output stage.It accurately tracks extremely small change in magnetic flux density –generally too small to operate Hall effect switch. W201 can be applied as current sensor, tooth sensor, proximity detectors and motion detectors. As sensitive monitor of magnetic flux, it can effectively measure a system’s performance with negligible system loading while providing isolation from contaminated and electrically noisy environments. Winson reserves the right to make changes to improve reliability or manufacturability. ©Winson, 2009/5/19 WSH201 Electrical Characteristics: Characteristic Symbol Test Conditions Supply Voltage Vcc ─ Supply Current Isupply B=0 Guass Quiescent Vout Vout B=0 Guass Sensitivity (Single △Vout B= 0 to ± 50 G Ended) Sensitivity △Vout B= 0 to ± 50 G (Differential) Bandwidth BW Measurable Range MR Input Impedence Rin B=0 Guass Min 2.2 ─ 2.0 7.0 15.0 － － － (T=+25˚C, Vdd=5.0V ) Typ Max Units 12 V ─ 3.25 5.0 mA 2.25 2.5 V 10.0 13.0 mV/G 20.0 16 ±100 3.3 25.0 － － － mV/G kHz Guass kΩ All output-voltage measurements are made with a voltmeter having an input impedance of at least 100kΩ Winson reserves the right to make changes to improve reliability or manufacturability. ©Winson, 2009/5/19 WSH201 Package Information: TO94: SOT-25: Winson reserves the right to make changes to improve reliability or manufacturability. ©Winson, 2009/5/19