ER1601FCT

WTE POWER SEMICONDUCTORS ER1600FCT – ER1606FCT Pb 16A GLASS PASSIVATED DUAL SUPERFAST RECTIFIER Features ! ! ! ! ! ! Glass Passivated Die Construction Super-Fast Switching Low Forward Voltage Drop C Low Reverse Leakage Current High Surge Current Capability G Plastic Material has UL Flammability Classification 94V-O












































D F P I H L B ITO-220 Dim Min Max 14.60 15.40 A 9.70 10.30 B 2.55 2.85 C 3.56 4.16 D 13.00 13.80 E 0.30 0.90 F 3.00 Ø 3.50 Ø G 6.30 6.90 H 4.20 4.80 I 2.50 2.90 J 0.36 0.80 K 2.90 3.30 L 2.29 2.79 P All Dimensions in mm A PIN1 2 3 Mechanical Data ! ! ! ! ! ! ! Case: ITO-220, Full Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 2.24 grams (approx.) Mounting Position: Any Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 E PIN 1 - + PIN 2 J K PIN 3 - Maximum Ratings and Electrical Characteristics Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. @TA=25°C unless otherwise specified Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 105°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage @IF = 8.0A Symbol VRRM VRWM VR VR(RMS) IO ER ER ER ER ER ER ER 1600FCT 1601FCT 1601AFCT 1602FCT 1603FCT 1604FCT 1606FCT Unit 50 35 100 70 150 105 200 140 16 300 210 400 280 600 420 V V A IFSM VFM IRM trr Cj Tj, TSTG 35 80 0.95 125 1.3 10 500 50 60 -65 to +150 1.7 A V µA nS pF °C Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 125°C Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. ER1600FCT – ER1606FCT 1 of 4 © 2006 Won-Top Electronics 

IF, INSTANTANEOUS FORWARD CURRENT (A) 20 I(AV), AVERAGE FORWARD CURRENT (A) 100 16 1600 - 1602 1603 - 1604 10 12 8 1606 1.0 4 Pulse width = 300µs 2% duty cycle 0 0 50 100 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.1 0 0.6 1.2 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 225 400 8.3 ms single half-sine-wave JEDEC method IFSM, PEAK FORWARD SURGE CURRENT (A) Tj = 25°C f = 1.0MHz 150 Cj, CAPACITANCE (pF) 100 ER1600FCT ER1602FCT 75 ER1603FCT ER1606FCT 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Maximum Non-Repetitive Surge Current 100 10 0.1 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr +0.5A 50Ω NI (Non-inductive) 10Ω NI Device Under Test (-) Pulse Generator (Note 2) 0A (+) 50V DC Approx -0.25A (-) 1.0Ω NI Oscilloscope (Note 1) (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit ER1600FCT – ER1606FCT 2 of 4 © 2006 Won-Top Electronics MARKING INFORMATION WTE ER160xFCT WTE ER160xFCT x Polarity = Manufacturer’s Logo = Device Number = 0, 1, 1A, 2, 3, 4 or 6 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) 525 x 31 x 6 Quantity (PCS) 50 Inner Box Size L x W x H (mm) 555 x 145 x 95 Quantity (PCS) 2,000 Carton Size L x W x H (mm) 572 x 306 x 218 Quantity (PCS) 8,000 Approx. Gross Weight (KG) 19.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT The full molded plastic package affords a major reduction of hardware as compared to a standard TO-220 package. However, precautions should be made in mounting procedure. A conical washer should be used to apply proper force to the device. Screw should not be tightened with any type of air-forced torque or equipment that may cause crack on device package. A layer of thermal grease or thermal pad in the interface will be considerably helpful for heat dissipation. 6-32 HEX Head Screw Plain Washer Rectifier Heatsink Conical Washer 6-32 HEX Nut ER1600FCT – ER1606FCT 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. ER1600FCT ER1601FCT ER1601AFCT ER1602FCT ER1603FCT ER1604FCT ER1606FCT 1. 2. Package Type ITO-220 ITO-220 ITO-220 ITO-220 ITO-220 ITO-220 ITO-220 Shipping Quantity 50 Units/Tube 50 Units/Tube 50 Units/Tube 50 Units/Tube 50 Units/Tube 50 Units/Tube 50 Units/Tube Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, ER1600FCT-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. ER1600FCT – ER1606FCT 4 of 4 © 2006 Won-Top Electronics