ER1603CT

WTE POWER SEMICONDUCTORS ER1600CT – ER1606CT Pb 16A GLASS PASSIVATED DUAL SUPERFAST RECTIFIER Features ! ! ! ! ! ! Glass Passivated Die Construction Super-Fast Switching Low Forward Voltage Drop C Low Reverse Leakage Current High Surge Current Capability G Plastic Material has UL Flammability Classification 94V-O












































D F P I H L B TO-220 Dim Min Max 13.90 15.90 A 9.80 10.70 B 2.54 3.43 C 3.56 4.56 D 12.70 14.73 E 0.51 0.96 F 3.55 Ø 4.09 Ø G 5.75 6.85 H 4.16 5.00 I 2.03 2.92 J 0.30 0.65 K 1.14 1.40 L 2.29 2.79 P All Dimensions in mm A PIN1 2 3 Mechanical Data ! ! ! ! ! ! ! Case: TO-220, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 2.24 grams (approx.) Mounting Position: Any Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 E PIN 1 - + Case, PIN 2 J K PIN 3 - Maximum Ratings and Electrical Characteristics Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. @TA=25°C unless otherwise specified Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 105°C Symbol VRRM VRWM VR VR(RMS) IO ER ER ER ER ER ER ER Unit 1600CT 1601CT 1601ACT 1602CT 1603CT 1604CT 1606CT 50 35 100 70 150 105 200 140 16 300 210 400 280 600 420 V V A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage Peak Reverse Current At Rated DC Blocking Voltage Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range @IF = 8.0A @TA = 25°C @TA = 125°C IFSM VFM IRM trr Cj Tj, TSTG 35 80 0.95 125 1.3 10 500 50 60 -65 to +150 1.7 A V µA nS pF °C Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. ER1600CT – ER1606CT 1 of 4 © 2006 Won-Top Electronics 

IF, INSTANTANEOUS FORWARD CURRENT (A) 20 I(AV), AVERAGE FORWARD CURRENT (A) 100 16 1600 - 1602 1603 - 1604 10 12 8 1606 1.0 4 Pulse width = 300µs 2% duty cycle 0 0 50 100 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.1 0 0.6 1.2 1.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 225 400 8.3 ms single half-sine-wave JEDEC method IFSM, PEAK FORWARD SURGE CURRENT (A) Tj = 25°C f = 1.0MHz 150 Cj, CAPACITANCE (pF) 100 ER1600CT ER1602CT 75 ER1603CT ER1606CT 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Maximum Non-Repetitive Surge Current 100 10 0.1 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr +0.5A 50Ω NI (Non-inductive) Device Under Test 50V DC Approx 10Ω NI (-) Pulse Generator (Note 2) (+) 0A -0.25A (-) 1.0Ω NI Oscilloscope (Note 1) (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit ER1600CT – ER1606CT 2 of 4 © 2006 Won-Top Electronics MARKING INFORMATION WTE ER160xCT WTE ER160xCT x Polarity = Manufacturer’s Logo = Device Number = 0, 1, 1A, 2, 3, 4 or 6 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) 525 x 31 x 6 Quantity (PCS) 50 Inner Box Size L x W x H (mm) 555 x 145 x 95 Quantity (PCS) 2,000 Carton Size L x W x H (mm) 572 x 306 x 218 Quantity (PCS) 8,000 Approx. Gross Weight (KG) 19.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT Recommended isolated mounting when screw is at heatsink potential. 4-40 hardware is used. Screw should not be tightened with any type of air-forced torque or equipment that may cause high impact on device package. The insulating bushing inside the mounting hole will insure the screw threads do not contact the metal base. The interface should apply a layer of thermal grease or a highly conductive thermal pad for better heat dissipation. 4-40 PAN or HEX Head Screw Plain Washer Insulating Bushing Rectifier Insulator Heatsink Compression Washer 4-40 HEX Nut ER1600CT – ER1606CT 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. ER1600CT ER1601CT ER1601ACT ER1602CT ER1603CT ER1604CT ER1606CT 1. 2. Package Type TO-220 TO-220 TO-220 TO-220 TO-220 TO-220 TO-220 Shipping Quantity 50 Units/Tube 50 Units/Tube 50 Units/Tube 50 Units/Tube 50 Units/Tube 50 Units/Tube 50 Units/Tube Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, ER1600CT-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. ER1600CT – ER1606CT 4 of 4 © 2006 Won-Top Electronics