FR2J-T3

WTE POWER SEMICONDUCTORS FR2A – FR2K Pb 2.0A SURFACE MOUNT GLASS PASSIVATED FAST RECOVERY DIODE Features ! ! ! ! ! ! ! Glass Passivated Die Construction Ideally Suited for Automatic Assembly B Low Forward Voltage Drop, High Efficiency Surge Overload Rating to 50A Peak Low Power Loss A Fast Recovery Time F Plastic Case Material has UL Flammability Classification Rating 94V-O C H G




















































































E SMB/DO-214AA Dim Min Max 3.30 3.94 A 4.06 4.70 B 1.91 2.11 C 0.152 0.305 D 5.08 5.59 E 2.13 2.44 F 0.051 0.203 G 0.76 1.27 H All Dimensions in mm D Mechanical Data ! ! ! ! ! ! Case: SMB/DO-214AA, Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Type Number Weight: 0.093 grams (approx.) Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 Maximum Ratings and Electrical Characteristics Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TL = 90°C Symbol VRRM VRWM VR VR(RMS) IO FR2A @TA=25°C unless otherwise specified FR2B FR2D FR2G FR2J FR2K Unit 50 35 100 70 200 140 2.0 400 280 600 420 800 560 V V A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage Peak Reverse Current At Rated DC Blocking Voltage Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range @IF = 2.0A @TA = 25°C @TA = 125°C IFSM VFM IRM trr Cj R
JL Tj, TSTG 150 50 1.30 5.0 300 250 50 20 -50 to +150 500 A V µA nS pF °C/W °C Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on P.C. Board with 8.0mm2 land area. FR2A – FR2K 1 of 4 © 2006 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) 3.0 IO, AVERAGE RECTIFIED CURRENT (A) 10 2.0 1.0 1.0 0.1 Tj = 25°C IF Pulse Width: 300 µs 0 25 50 75 100 125 150 175 0.01 0 0.4 0.8 1.2 1.6 TL , LEAD TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IR, INSTANTANEOUS REVERSE CURRENT (µA) IFSM, PEAK FORWARD SURGE CURRENT (A) Single Half-Sine-Wave (JEDEC Method) 1000 Tj = 125°C 50 Tj = 150°C 100 40 30 10 20 1.0 Tj = 25°C 10 0 1 10 100 0.1 0 20 40 60 80 100 120 140 NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4, Typical Reverse Characteristics trr +0.5A 50Ω NI (Non-inductive) 10Ω NI Device Under Test (-) Pulse Generator (Note 2) 0A (+) 50V DC Approx -0.25A (-) 1.0Ω NI Oscilloscope (Note 1) (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit FR2A – FR2K 2 of 4 © 2006 Won-Top Electronics MARKING INFORMATION RECOMMENDED FOOTPRINT WTE FR2x Cathode WTE FR2x x = Polarity Band = Manufacturer’s Logo = Device Number = A, B, D, G, J or K 0.050 MIN (1.27 MIN) 0.082 MIN (2.10 MIN) 0.106 MAX (2.65 MAX) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 8mm 330mm 12mm 4mm 12mm Product ID Label 1.6mm Reel Diameter (mm) 330 Quantity (PCS) 3,000 Inner Box Size L x W x H (mm) 340 x 337 x 45 Quantity (PCS) 6,000 Carton Size L x W x H (mm) 370 x 370 x 420 Quantity (PCS) 48,000 Approx. Gross Weight (KG) 14.0 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. FR2A – FR2K 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. FR2A-T3 FR2B-T3 FR2D-T3 FR2G-T3 FR2J-T3 FR2K-T3 1. 2. Package Type SMB SMB SMB SMB SMB SMB Shipping Quantity 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel 3000/Tape & Reel Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, FR2A-T3-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. FR2A – FR2K 4 of 4 © 2006 Won-Top Electronics