KBPC15

W TE PO WE R SEM IC O ND UC TO R S KBPC15, 25, 35/W SERIES 15, 25, 35A HIGH CURRENT BRIDGE RECTIFIER Features ! ! ! ! ! ! Diffused Junction Low Reverse Leakage Current Low Power Loss, High Efficiency Electrically Isolated Metal Case for Maximum Heat Dissipation Case to Terminal Isolation Voltage 2500V UL Recognized File # E157705 A C G ~ D + ~ C C ~ D ~ + A C G H H E B KBPC KBPC Dim A B C D E G H Mechanical Data ! ! ! ! ! ! Case: Metal Case with Electrically Isolated Epoxy Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Symbols Marked on Case Mounting: Through Hole for #10 Screw Weight: KBPC 31.6 grams (approx.) KBPC-W 28.5 grams (approx.) Marking: Type Number "W” Suffix Designates Wire Leads No Suffix Designates Faston Terminals E B KBPC-W KBPC-W Min Max Min Max 28.40 28.70 28.40 28.70 10.97 11.23 10.97 11.23 15.70 16.70 17.10 19.10 17.50 18.50 10.90 11.90 22.86 25.40 30.50 — Hole for #10 screw, 5.08Ø Nominal 6.35 Typical 0.97Ø 1.07Ø All Dimension in mm Maximum Ratings and Electrical Characteristics Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Output Current @TC = 60°C KBPC15 KBPC25 KBPC35 Symbol VRRM VRWM VR VR(RMS) -00/W 50 35 @TA=25°C unless otherwise specified -01/W 100 70 -02/W 200 140 -04/W 400 280 15 25 35 -06/W 600 420 -08/W 800 560 -10/W 1000 700 Unit V V IO A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave Superimposed on rated load (JEDEC Method) KBPC15 KBPC25 KBPC35 IFSM 300 400 400 A Forward Voltage Drop (per element) KBPC15 @IF = 7.5A KBPC25 @IF = 12.5A KBPC35 @IF = 17.5A @TC = 25°C @TC = 125°C KBPC15 KBPC25 KBPC35 VFM 1.2 V Peark Reverse Current At Rated DC Blocking Voltage I2t Rating for Fusing (t < 8.3ms) (Note 1) IRM 10 1.0 373 373 664 µA mA I2t A2s KBPC15, 25, 35/W SERIES 1 of 4 © 2002 Won-Top Electronics Maximum Ratings and Electrical Characteristics Typical Junction Capacitance (per element) (Note 2) Typical Thermal Resistance Junction to Case (per element) (Note 3) KBPC15 KBPC25 KBPC35 Cj @TA=25°C unless otherwise specified 300 6.3 3.8 2.7 2500 -65 to +150 pF R
JC K/W RMS Isolation Voltage from Case to Lead Operating and Storage Temperature Range VISO Tj, TSTG V °C * Glass passivated forms are available upon request. Note: 1. Measured at non-repetitive, for t > 1ms and < 8.3ms. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 3. Thermal resistance junction to case mounted on heatsink. KBPC15, 25, 35/W SERIES 2 of 4 © 2002 Won-Top Electronics KBPC35 IF, AVERAGE FORWARD CURRENT (A) Mounted on a 220 x 220 x 50 mm AL plate heatsink 30 KBPC25 IF, INSTANTANEOUS FORWARD CURRENT (A) 40 100 10 20 KBPC15 1.0 10 0.1 Tj = 25°C Resistive or Inductive load Pulse Width = 300µs 0 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 25 50 75 100 125 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward. Current Derating Curve VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) IFSM, PEAK FWD. SURGE CURRENT (A) 400 Single Half-Sine Wave (JEDEC Method) 1000 f = 1 Mhz Tj = 25°C 300 KBPC25, 35 200 KBPC15 Cj, CAPACITANCE (pF) 100 100 Tj = 150°C 0 1 10 NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current 100 Tj = 125°C 100 10 0.1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance (per element) 1.0 IR, INSTANTANEOUS REVERSE CURRENT (µA) 10 1.0 0.1 Tj = 25°C 0.01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics (per element) KBPC15, 25, 35/W SERIES 3 of 4 © 2002 Won-Top Electronics ORDERING INFORMATION Product No. KBPCxx00 KBPCxx00W KBPCxx01 KBPCxx01W KBPCxx02 KBPCxx02W KBPCxx04 KBPCxx04W KBPCxx06 KBPCxx06W KBPCxx08 KBPCxx08W KBPCxx10 KBPCxx10W Package Type Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Shipping Quantity 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. © 2002 Won-Top Electronics KBPC15, 25, 35/W SERIES 4 of 4