MT3516

WTE POWER SEMICONDUCTORS MT25, 35 SERIES Pb 25, 35A GLASS PASSIVATED THREE-PHASE BRIDGE RECTIFIER Features ! ! ! ! ! ! ! Glass Passivated Die Construction Low Forward Voltage Drop High Current Capability High Reliability High Surge Current Capability Ideal for Printed Circuit Boards Recognized File # E157705 D ~ ~ H E ~ + A Mechanical Data ! ! ! ! ! Case: Epoxy Case with Heat Sink Internally Mounted in the Bridge Encapsulation Terminals: Plated Faston Lugs Solderable per MIL-STD-202, Method 208 B Polarity: As Marked on Body Weight: 21 grams (approx.) Mounting Position: Bolt Down on Heatsink With Silicone Thermal Compound Between Bridge and Mounting Surface for Maximum Heat Transfer Efficiency Mounting Torque: 23 cm-kg (20 in-lbs) Max. Marking: Type Number Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 7 G C MT Dim Min Max 28.40 28.70 A — 10.00 B 22.86 23.86 C — 25.30 D 16.00 Typical E 6.35 x 0.80 G 5.10 Ø 5.30 Ø H All Dimensions in mm Metal Heatsink ! ! ! Maximum Ratings and Electrical Characteristics Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. @TA=25°C unless otherwise specified Voltage Ratings Characteristics Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Peak Non-Repetitive Reverse Voltage RMS Reverse Voltage Symbol VRRM VRWM VR VRSM VR(RMS) MT25, 35 00 50 75 35 01 100 150 70 02 200 275 140 04 400 500 280 06 600 725 420 08 800 900 560 10 12 14 16 Unit 1000 1200 1400 1600 1100 1300 1500 1700 700 840 980 1120 V V V MT25, 35 SERIES 1 of 7 © 2006 Won-Top Electronics Forward Conduction Characteristic Average Rectified Output Current MT25 @TC = 70°C, MT35 @ TC = 60°C Non-Repetitive Peak Forward Surge Current (No Voltage Reapplied t = 8.3ms at 60Hz) (No Voltage Reapplied t = 10ms at 50Hz) (100% VRRM Reapplied t = 8.3ms at 60Hz) (100% VRRM Reapplied t = 8.3ms at 50Hz) Symbol IO MT25 MT35 Unit A 25 35 IFSM 375 360 314 300 500 475 420 400 A I2t Rating for Fusing (No-Voltage Reapplied t = 8.3ms at 60Hz) (No-Voltage Reapplied t = 10ms at 50Hz) (100% VRRM Reapplied t = 8.3ms at 60Hz) (100% VRRM Reapplied t = 10ms at 50Hz) Maximum Forward Voltage Drop @Tj = 25°C, @IFM = 40Apk per single junction Peak Reverse Current (per leg) @Tj = 25°C At Rated DC Blocking Voltage @Tj = 125°C RMS Isolation Voltage from Case to Lead I2t 580 635 410 450 1030 1130 730 800 A2s VF IR VISO 1.26 10 5.0 2500 1.19 V µA mA V Thermal Characteristics Thermal Resistance Junction to Case at DC Operation per Bridge Thermal Resistance Case to Heatsink Mounting Surface, Smooth, Flat and Greased Operating Temperature Range Storage Temperature Range R
JC R
CS Tj TSTG 1.42 0.2 -40 to +150 -40 to +150 1.16 K/W K/W °C °C MT25, 35 SERIES 2 of 7 © 2006 Won-Top Electronics °C) 160 MT25 Series Inst antan eous F orwar d Curr ent (A) 1000 MT25 Series M mu Allo ble Ca Te per tu ( axi m wa se m a re 140 100 Per Junction 120 120° (Rect) 100 10 TJ = 15O°C TJ = 25°C 1 0 0.5 1 1.5 2 2.5 3 3.5 4 80 60 0 5 10 15 20 25 30 Total Output Current (A) Instantaneous Forward Voltage (V) Fig. 1 - Current Ratings Characteristics 55 50 45 40 35 30 25 20 15 10 5 0 0 5 10 15 20 25 0 25 50 120° (Rect) MT25 Series TJ= 150°C 2 Fig. 2 - Forward Voltage Drop Characteristics Ma xi mu m To ta l Po wer Lo ss (W ) K/ W 3K /W 4K /W 5K /W 7 K/W 10 K/W 1 W K/ Rt A hS W K/ .7 =0 a elt -D R 75 100 125 150 Total Output Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 3 - Total Power Loss Characteristics 320 300 P akHalf Sne W ve F e i a orward Cu nt (A rre ) 280 260 240 220 200 180 160 140 120 100 80 1 10 100 Num ber Of Equal Amplitude Half Cycle Current Pulses (N) P akHa S e Wv e F rw Cu nt (A e lf in a o ard rre ) At Any Rated Load Condition And W ith Rated V RRM Applied Following Surge. Initial TJ = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 400 360 320 280 240 200 160 120 80 0.01 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T = 150°C J No Voltage Reapplied Rated V RRM Reapplied MT25 Series MT25 Series 0.1 Pulse Train Duration (s) 1 Fig. 4 - Maximum Non-Repetitive Surge Current Fig. 5 - Maximum Non-Repetitive Surge Current MT25, 35 SERIES 3 of 7 © 2006 Won-Top Electronics 150 M axim Allowable Case Tem um perature ( C) ° MT35 Series 130 1000 MT35 Series Instantaneous Forward Current (A) 100 Per Junction 110 120° (Rect) 90 10 T J= 15O°C T J= 25°C 1 0 0.5 1 1.5 2 2.5 3 3.5 4 70 50 0 5 10 15 20 25 30 35 40 Total Output Current (A) Instantaneous Forward Voltage (V) Fig. 6 - Current Ratings Characteristics 80 Ma ximum Total Powe r Loss (W) 70 60 50 40 30 20 10 0 0 5 10 15 20 25 30 35 0 25 50 120° (Rect) MT35 Series TJ= 150°C Rt A hS Fig. 7 - Forward Voltage Drop Characteristics 1K /W = W K/ 0.7 a elt -D R 2K /W 3K /W 4K /W 5 K/W 7 K/W 10 K/W 75 100 125 150 Total Output Current (A) Maximum Allowable Ambient Temperature (°C) Fig. 8 - Total Power Loss Characteristics 450 Pe Ha Sine W ve Forwa C ak lf a rd urrent (A) 400 350 300 250 200 150 100 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Peak H Sin eW ve Fo ard Cu nt (A) alf a rw rre At Any Rated Load Condition And With Rated V RRMApplied Following Surge. Initial TJ = 150°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 500 450 400 350 300 250 200 150 100 0.01 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial T J = 150°C No Voltage Reapplied Rated VRRM Reapplied MT35 Series MT35 Series 0.1 Pulse Train Duration (s) 1 Fig. 9 - Maximum Non-Repetitive Surge Current Fig. 10 - Maximum Non-Repetitive Surge Current MT25, 35 SERIES 4 of 7 © 2006 Won-Top Electronics 10 Transient Therm Im al pedance Z thJC (K/W) Steady State Value: R thJC = 1.42 K/W 1 (DC Operation) 0.1 0.01 M T25 Series Per Bridge 0.001 0.001 0.01 0.1 1 10 100 Square W ave Pulse Duration (s) Fig. 11 - Thermal Impedance ZthJC Characteristics 10 Transient Therm Im al pedance Z thJC (K/W) Steady State Value: R thJC = 1.16 K/W 1 (DC Operation) 0.1 0.01 MT35 Series Per Bridge 0.001 0.001 0.01 0.1 1 10 100 Square Wave Pulse Duration (s) Fig. 12 - Thermal Impedance ZthJC Characteristics MT25, 35 SERIES 5 of 7 © 2006 Won-Top Electronics MARKING INFORMATION WTE — + MTxxyy WTE MTxxyy xx yy Polarity = Manufacturer’s Logo = Device Number = 25 or 35 = 00, 01, 02, 04, 06, 08, 10, 12, 14 or 16 = As Marked on Body PACKAGING INFORMATION BULK Inner Box Size L x W x H (mm) 195 x 195 x 40 Quantity (PCS) 50 Carton Size L x W x H (mm) 405 x 205 x 240 Quantity (PCS) 500 Approx. Gross Weight (KG) 12.0 Note: 1. Paper box, white or brown color. MT25, 35 SERIES 6 of 7 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. MTxx00 MTxx01 MTxx02 MTxx04 MTxx06 MTxx08 MTxx10 MTxx12 MTxx14 MTxx16 1. 2. Package Type Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Shipping Quantity 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box 50 Units/Box Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, MT2500-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. MT25, 35 SERIES 7 of 7 © 2006 Won-Top Electronics