PB1000S

PB1000S

  • 厂商:

    WTE

  • 封装:

  • 描述:

    PB1000S - 10A SINGLE-PHASE BRIDGE RECTIFIER - Won-Top Electronics

  • 详情介绍
  • 数据手册
  • 价格&库存
PB1000S 数据手册
WTE POWER SEMICONDUCTORS PB1000S – PB1010S Pb 10A SINGLE-PHASE BRIDGE RECTIFIER Features ! ! ! ! ! ! ! Diffused Junction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has UL Flammability 94V-0 Recognized File # E157705 H G + E ~ ~ A Dim A B C D E KBPC-6 Min Max 14.73 15.75 5.80 6.90 19.00 — 1.00 Ø Typical 1.70 2.72 Hole for #6 screw G 3.60 4.00 10.30 11.30 H All Dimensions in mm Mechanical Data ! ! ! ! ! ! ! ! Case: KBPC-6, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Marked on Body Weight: 3.8 grams (approx.) Mounting Position: Through Hole for #6 Screw Mounting Torque: 10 cm-kg (8.8 in-lbs) Max. Marking: Type Number Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 D C B A Maximum Ratings and Electrical Characteristics Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. @TA=25°C unless otherwise specified Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @TC = 50°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage per leg Peak Reverse Current At Rated DC Blocking Voltage I2t Rating for Fusing (t 1ms and < 8.3ms. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. PB1000S – PB1010S 1 of 4 © 2006 Won-Top Electronics  IAV, AVERAGE FORWARD OUTPUT CURRENT (A) 10 Resistive or Inductive load Mounted on Metal chassis 10 8 IF, FORWARD CURRENT (A) 6 Mounted on PC Board 1.0 4 0.1 2 Tj = 25°C Pulse width = 300µs 0 25 50 75 100 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 125 0.01 0 0.4 0.8 1.6 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per element 150 IF, PEAK FORWARD SURGE CURRENT (A) TC = 50°C 125 Single half sine-wave JEDEC method IR, INSTANTANEOUS REVERSE CURRENT (µA) 10 Tj = 100°C 100 1.0 75 50 0.1 25 Tj = 25°C 0 1.0 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current 0.01 0 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics, per element PB1000S – PB1010S 2 of 4 © 2006 Won-Top Electronics MARKING INFORMATION AC + WTE PB10xxS WTE PB10xxS xx Polarity = Manufacturer’s Logo = Device Number = 00, 01, 02, 04, 06, 08 or 10 = As Marked on Body PACKAGING INFORMATION BULK Inner Box Size L x W x H (mm) 198 x 198 x 50 Quantity (PCS) 200 Carton Size L x W x H (mm) 425 x 215 x 280 Quantity (PCS) 2,000 Approx. Gross Weight (KG) 8.0 Note: 1. Paper box, white or brown color. PB1000S – PB1010S 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. PB1000S PB1001S PB1002S PB1004S PB1006S PB1008S PB1010S 1. 2. Package Type Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Shipping Quantity 200 Units/Box 200 Units/Box 200 Units/Box 200 Units/Box 200 Units/Box 200 Units/Box 200 Units/Box Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, PB1000S-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. PB1000S – PB1010S 4 of 4 © 2006 Won-Top Electronics
PB1000S
1. 物料型号: - PB1000S-PB1010S

2. 器件简介: - 10A单相桥式整流器,具有以下特点: - 扩散结 - 大电流能力 - 高外壳耐电压 - 高浪涌电流能力 - 适用于印刷电路板应用 - 塑料材料具有UL可燃性94V-0等级 - 9认可文件#E157705

3. 引脚分配: - 引脚:镀锡引线,可焊性符合MIL-STD-202,方法208 - 极性:在本体上标记 - 通孔安装,适用于#6螺丝

4. 参数特性: - 峰值反向重复电压(VRRM)、工作峰值反向电压(VRWM)、直流阻断电压(VR) - 有效值反向电压(VR(RMS)) - 平均整流输出电流(Io),在50°C时 - 非重复峰值正向浪涌电流(IFSM),8.3ms单半正弦波叠加在额定负载上(JEDEC方法) - 每腿正向电压(VFM)在5.0A时 - 在额定直流阻断电压下的最大反向峰值电流(IR)在25°C和125°C时 - 用于熔断的额定电流(It),小于8.3ms(2s) - 典型结电容(Cj) - 典型每腿热阻(RJC) - 工作和存储温度范围(T范围,TSTG):-65至+125°C

5. 功能详解: - 单相,半波,60Hz,电阻性或电感性负载 - 对于电容器负载,电流需降低20%

6. 应用信息: - 适用于需要大电流整流的应用场合,特别是在印刷电路板应用中。

7. 封装信息: - 封装类型:KBPC-6,模塑塑料 - 尺寸:包括A、B、C、D、E、G和H等不同维度的最小值和最大值 - 标记:型号编号 - 无铅:对于RoHS/无铅版本,在零件编号后添加“-LF”后缀,见第4页
PB1000S 价格&库存

很抱歉,暂时无法提供与“PB1000S”相匹配的价格&库存,您可以联系我们找货

免费人工找货