PB1004

W TE PO WE R SEM IC O ND UC TO R S PB1000 – PB1010 10A BRIDGE RECTIFIER Features ! ! ! ! ! ! Diffused Junction High Current Capability High Case Dielectric Strength High Surge Current Capability Ideal for Printed Circuit Board Application Plastic Material has Underwriters Laboratory Flammability Classification 94V-O H J G E ~ E + ~ A Dim A B C D E KBPC-8 Min Max 18.54 19.56 6.35 7.60 19.00 — 1.27 Ø Typical 5.33 7.37 Hole for #6 screw G 3.60 4.00 H 12.20 13.20 J 2.38 x 45°C Typical All Dimensions in mm Mechanical Data ! ! ! ! ! ! ! Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Marked on Body Weight: 5.4 grams (approx.) Mounting Position: Through Hole for #6 Screw Mounting Torque: 5.0 Inch-pounds Maximum Marking: Type Number D C B A Maximum Ratings and Electrical Characteristics Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. PB 1000 50 35 @TA=25°C unless otherwise specified Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @TC = 50°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage (per element) Peak Reverse Current At Rated DC Blocking Voltage I2t Rating for Fusing (t 1ms and < 8.3ms. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 4. Thermal resistance junction to case per element. PB1000 – PB1010 1 of 3 © 2002 Won-Top Electronics IAV, AVERAGE FORWARD OUTPUT CURRENT (A) 10 Resistive or Inductive load Mounted on Metal chassis 10 8 IF, FORWARD CURRENT (A) 6 Mounted on PC Board 1.0 4 0.1 2 Tj = 25°C Pulse width = 300µs 0 25 50 75 100 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 125 0.01 0 0.4 0.8 1.6 1.2 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics, per element 150 IF, PEAK FORWARD SURGE CURRENT (A) TC = 50°C 125 Single half sine-wave JEDEC method IR, INSTANTANEOUS REVERSE CURRENT (µA) 10 Tj = 100°C 100 1.0 75 50 0.1 25 Tj = 25°C 0 1.0 10 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Max Non-Repetitive Peak Fwd Surge Current 0.01 0 40 80 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics, per element PB1000 – PB1010 2 of 3 © 2002 Won-Top Electronics ORDERING INFORMATION Product No. PB1000 PB1001 PB1002 PB1004 PB1006 PB1008 PB1010 Package Type Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Square Bridge Shipping Quantity 200 Units/Box 200 Units/Box 200 Units/Box 200 Units/Box 200 Units/Box 200 Units/Box 200 Units/Box Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. © 2002 Won-Top Electronics PB1000 – PB1010 3 of 3