SD1060YS-T3

SD1060YS-T3

  • 厂商:

    WTE

  • 封装:

  • 描述:

    SD1060YS-T3 - 10A DPAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER - Won-Top Electronics

  • 详情介绍
  • 数据手册
  • 价格&库存
SD1060YS-T3 数据手册
WTE POWER SEMICONDUCTORS SD1020YS – SD10100YS 10A DPAK SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Features ! ! ! ! ! ! ! Schottky Barrier chip A C J Guard Ring Die Construction B Low Profile Package D High Surge Current Capability Low Power Loss, High Efficiency Ideal for Printed Circuit Board E PIN 1 2 3 For Use in Low Voltage, High Frequency Inverters, Free Wheeling Applications G H L P P D PAK/TO-252AA Dim Min Max A 6.4 6.8 B 5.0 5.4 C 2.35 2.75 D — 1.60 E 5.3 5.7 G 2.3 2.7 H 0.4 0.8 J 0.4 0.6 K 0.3 0.7 L 0.50 Typical P — 2.3 All Dimensions in mm K Mechanical Data ! ! ! ! ! ! Case: Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band Weight: 0.4 grams (approx.) Mounting Position: Any Marking: Type Number Standard Packaging: 16mm Tape (EIA-481) PIN 1 PIN 3 - + Case PIN 2 ! Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SD 1020YS SD 1030YS SD 1040YS SD 1050YS SD 1060YS SD SD Unit 1080YS 10100YS Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TL = 100°C Symbol VRRM VRWM VR VR(RMS) IO IFSM VFM IRM Cj RJA Tj TSTG 2 20 14 30 21 40 28 50 35 10 100 60 42 80 56 100 70 V V A A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage (Note 1) Peak Reverse Current At Rated DC Blocking Voltage @IF = 10A @TA = 25°C @TA = 100°C 0.55 0.2 50 600 60 0.75 0.85 V mA pF K/W °C °C Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Ambient Operating Temperature Range Storage Temperature Range -50 to +125 -50 to +150 Note: 1. Mounted on P.C. Board with 14mm (0.13mm thick) copper pad. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. SD1020YS – SD10100YS 1 of 3 © 2002 Won-Top Electronics 10 40 8 IF, NSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE OUTPUT CURRENT (A) 1020YS - 1040YS 20 6 1050YS - 1060YS 1080YS - 10100YS 4 10 2 Single Pulse Half-Wave 60 Hz Resistive or Inductive Load Tj = 25ºC Pulse Width = 300 µs 2% Duty Cycle 0 10 40 60 80 100 120 140150 0.1 0 0.5 1.0 1.5 2.0 2.5 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TL, LEAD TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve 125 2000 Tj = 25ºC f = 1MHz IFSM , PEAK FORWARD SURGE CURRENT (A) 100 Cj, CAPACITANCE (pF) 8.3ms Single Half Sine-Wave JEDEC Method 75 1000 50 25 100 0 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Peak Fwd Surge Current 0.1 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance SD1020YS – SD10100YS 2 of 3 © 2002 Won-Top Electronics ORDERING INFORMATION Product No.! SD1020YS-T3 SD1030YS-T3 SD1040YS-T3 SD1050YS-T3 SD1060YS-T3 SD1080YS-T3 SD10100YS-T3 ! Package Type DPAK DPAK DPAK DPAK DPAK DPAK DPAK Shipping Quantity 2500/Tape & Reel 2500/Tape & Reel 2500/Tape & Reel 2500/Tape & Reel 2500/Tape & Reel 2500/Tape & Reel 2500/Tape & Reel T3 suffix refers to a 13” reel. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. RECOMMENDED FOOTPRINT 0.165 (4.191) 0.100 (2.54) 0.118 (3.0) 0.063 (1.6) 0.190 (4.826) 0.243 (6.172) inches(mm) Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. SD1020YS – SD10100YS 3 of 3 © 2002 Won-Top Electronics
SD1060YS-T3
1. 物料型号: - SD1020YS-T3, SD1030YS-T3, SD1040YS-T3, SD1050YS-T3, SD1060YS-T3, SD1080YS-T3, SD10100YS-T3,这些型号均采用DPAK封装,每卷2500个,T3后缀指的是13英寸的卷轴。

2. 器件简介: - 这些是10A DPAK表面贴装肖特基势垒整流器,具有肖特基势垒芯片、防护环芯片结构、低轮廓封装、高浪涌电流能力、低功耗、高效率等特点,适合用于印刷电路板,用于低电压、高频率的逆变器、自由轮应用。

3. 引脚分配: - 引脚3为0V(负极),引脚2为P(正极)。

4. 参数特性: - 包括峰值重复反向电压、工作峰值反向电压、直流阻断电压、RMS反向电压、平均整流输出电流、非重复峰值正向浪涌电流、正向电压、峰值反向电流、典型结电容和典型热阻等参数。

5. 功能详解: - 这些整流器能够在100°C时承受10A的电流,具有低正向电压降和高浪涌电流能力,适用于高效率的电源转换。

6. 应用信息: - 适用于低电压、高频率的逆变器和自由轮应用,不推荐用于生命支持设备或系统。

7. 封装信息: - 采用DPAK/TO-252AA封装,塑封,引脚为镀层可焊,标记为型号编号,标准包装为16mm胶带(EIA-481)。
SD1060YS-T3 价格&库存

很抱歉,暂时无法提供与“SD1060YS-T3”相匹配的价格&库存,您可以联系我们找货

免费人工找货