U30D30C

WTE POWER SEMICONDUCTORS U30D05C – U30D60C Pb 30A GLASS PASSIVATED DUAL SUPEFAST RECTIFIER Features ! ! ! ! ! ! Glass Passivated Die Construction Super-Fast Switching Low Forward Voltage Drop Low Reverse Leakage Current S High Surge Current Capability Plastic Material has UL Flammability R Classification 94V-O












































L N M A B H Dim A B C D E G H J K L M N P R S TO-3P Min Max 3.20 3.50 4.70 5.30 — 23.00 19.00 — 2.80 3.20 0.45 0.85 — 16.20 1.70 2.70 3.15 Ø 3.65 Ø — 4.50 5.25 5.65 1.10 1.40 — 2.50 11.70 12.70 5.00 6.00 All Dimensions in mm J K PIN1 2 3 P Mechanical Data ! ! ! ! ! ! ! Case: TO-3P, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-750, Method 2026 Polarity: See Diagram Weight: 5.6 grams (approx.) Mounting Position: Any Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 C PIN 1 - + Case, PIN 2 G D E PIN 3 - Maximum Ratings and Electrical Characteristics Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. U30D 05C 50 35 @TA=25°C unless otherwise specified Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 100°C Symbol VRRM VRWM VR VR(RMS) IO U30D 10C 100 70 U30D 15C 150 105 U30D 20C 200 140 U30D 30C 300 210 U30D 40C 400 280 U30D 50C 500 350 U30D 60C 600 420 Unit V V A 30 Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage Peak Reverse Current At Rated DC Blocking Voltage Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range @IF = 15A @TA = 25°C @TA = 100°C IFSM VFM IRM trr Cj Tj, TSTG 35 150 0.975 300 1.3 10 500 50 100 -55 to +150 1.7 A V µA nS pF °C Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. See figure 5. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. U30D05C – U30D60C 1 of 4 © 2006 Won-Top Electronics 

IF, INSTANTANEOUS FORWARD CURRENT (A) 30 I(AV), AVERAGE FORWARD CURRENT (A) 100 24 05C - 20C 30C - 40C 10 18 12 50C - 60C 1.0 6 Pulse width = 300µs 2% duty cycle 0 0 50 100 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.1 0 0.5 1.0 1.5 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 300 400 8.3 ms single half-sine-wave JEDEC method IFSM, PEAK FORWARD SURGE CURRENT (A) Tj = 25°C f = 1.0MHz Cj, CAPACITANCE (pF) 200 U30D05C U30D40C 100 U30D50C U30D60C 100 0 1 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Maximum Non-Repetitive Surge Current 100 10 0.1 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr +0.5A 50Ω NI (Non-inductive) 10Ω NI Device Under Test (-) Pulse Generator (Note 2) 0A (+) 50V DC Approx -0.25A (-) 1.0Ω NI Oscilloscope (Note 1) (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit U30D05C – U30D60C 2 of 4 © 2006 Won-Top Electronics MARKING INFORMATION U30DxxC U30DxxC xx Polarity = Device Number = 05, 10, 15, 20, 30, 40, 50 or 60 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) 505 x 46 x 6.5 Quantity (PCS) 30 Inner Box Size L x W x H (mm) 520 x 145 x 95 Quantity (PCS) 1,200 Carton Size L x W x H (mm) 540 x 306 x 115 Quantity (PCS) 2,400 Approx. Gross Weight (KG) 18.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT Recommended isolated mounting when screw is at heatsink potential. 6-32 hardware is used. A conical washer should be used to apply proper force to the device. Screw should not be tightened with any type of air-forced torque or equipment that may cause high impact on device package. The interface should apply a layer of thermal grease or a highly conductive thermal pad for better heat dissipation. 6-32 HEX Head Screw Plain Washer Rectifier Insulator Heatsink Conical Washer 6-32 HEX Nut U30D05C – U30D60C 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. U30D05C U30D10C U30D15C U30D20C U30D30C U30D40C U30D50C U30D60C 1. 2. Package Type TO-3P TO-3P TO-3P TO-3P TO-3P TO-3P TO-3P TO-3P Shipping Quantity 30 Units/Tube 30 Units/Tube 30 Units/Tube 30 Units/Tube 30 Units/Tube 30 Units/Tube 30 Units/Tube 30 Units/Tube Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, U30D05C-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com We power your everyday. U30D05C – U30D60C 4 of 4 © 2006 Won-Top Electronics