140106146000

Dimensions: [mm] Recommended Land Pattern: [mm] General Properties: Type Optocoupler Phototransistor Input 10,6 4 8,4 4 2 3,44 1 1,64 10,2 ±0,3 3 8,5 ±0,3 0,2 typ. 7,6 ±0,2 2 4 3 Plastic Housing Color White RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] Halogen Free Conform [JEDEC JS709B] Halogen Free Conform [IEC 61249-2-21] VDE Approval 40051484 [DIN EN 60747-5-5 (VDE0884-5); EN 60747-5-5:2011; A1:2015] cULus Approval E513104 [UL 1577] CQC Approval CQC20001271516 [GB4943.1-2001; GB8898-2011] 0,1 typ. 2,1 typ. Schematic: General Information: 3,6 ±0,2 1 Scale - 4:1 2,0 ±0,1 0,5 typ. LSOP4 Certification: 2,54 typ. 1 3 0,4 typ. 2 DC Package 1 4 Anode Collector 2 3 Cathode Emitter Operating Temperature -55 up to +110 °C Storage Conditions (for single parts) -55 up to +125 °C Storage Conditions (in original packaging) < 40 °C ; < 75 % RH Moisture Sensitivity Level (MSL) 1 Scale - 4:1 Product Marking: Pin 1 Anode o Marking 106 Marking - Date Code YWW CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 001.003 2023-08-22 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-OCPT Optocoupler Phototransistor ORDER CODE 140106146000 SIZE/TYPE BUSINESS UNIT STATUS PAGE LSOP4 eiPal Valid 1/12 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Absolute Maximum Ratings Input Properties (Ambient Temperature 25 °C unless otherwise specified): Properties Test conditions Electrical & Optical Output Properties: Value Unit Forward Current IF max. 60 mA Peak Forward Current IF Peak duty/ 100 @ 100 Hz 1 A PI 100 mW VREV 6 V Input Power Dissipation Reverse Voltage Absolute Maximum Ratings Output Properties: (Ambient Temperature 25 °C unless otherwise specified): Properties Value Unit Collector Emitter Voltage VCE 80 V Emitter Collector Voltage VEC 7 V Collector Current ICE.P 50 mA PO 150 mW Output Power Dissipation Value Unit Power Dissipation 1) PDiss 250 mW Isolation Voltage VISO AC for 1 Minute, RH 40~60 % 5000 V (RMS) 1) Test conditions Properties Test conditions Forward Voltage VF IF = 10 mA Reverse Current IREV VREV = 6 V Input Capactiance Cin V=0V f = 1 kHz Value max. 1.24 1.4 V 10 µA 30 pF max. Unit Collector-Emitter Breakdown Voltage V(BR)CE IC = 100 µA IF = 0 80 V Emitter-Collector Breakdown Voltage V(BR)EC IE = 100 µA IF = 0 7 V 100 nA Electrical & Optical Transfer Properties: Properties Current Transfer Ratio Test conditions CTR Value min. IF = 5 mA VCE = 5 V typ. max. 100 10 mA VCEsat IIF = C = 1 mA Unit 300 % 0.1 0.3 V Rise Time tr VCE = 2 V IC = 2 mA RL = 100 Ω 5 18 µs Fall Time tf VCE = 2 V IC = 2 mA RL = 100 Ω 6 18 µs Cut-Off Frequency fc VCE = 2 V IC = 2 mA RL = 100 Ω -3 dB 80 kHz Floating Capacitance CIO V=0V f = 1 MHz 0.4 pF Isolation Resistance RISO DC = 500 V 40~60 % R.H. 100 TΩ Unit typ. min. ICEO.Dark VI CE= =0 20 V F Total power dissipation of the whole component Electrical & Optical Input Properties: Value Test conditions Collector-Emitter Dark Current Collector-Emitter Saturation Voltage Absolute Maximum Ratings Common Properties: Properties Properties 1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 001.003 2023-08-22 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-OCPT Optocoupler Phototransistor ORDER CODE 140106146000 SIZE/TYPE BUSINESS UNIT STATUS PAGE LSOP4 eiPal Valid 2/12 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Total Power Dissipation vs. Ambient Temperature: Collector Dark Current vs. Ambient Temperature: 160 10000 Phototransistor- PO (mW) VCE= 20V VCE= 10V 120 Collector Dark Current (nA) Collector Power Dissipation (mW) Forward Current (mA) 140 100 80 60 IR-diode - IF (mA) 40 1000 100 10 20 0 1 -55 -35 -15 5 25 45 65 85 105 125 25 45 65 85 105 125 Ambient Temperature (°C) Ambient Temperature (°C) CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 001.003 2023-08-22 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-OCPT Optocoupler Phototransistor ORDER CODE 140106146000 SIZE/TYPE BUSINESS UNIT STATUS PAGE LSOP4 eiPal Valid 3/12 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Relative CTR vs. Ambient Temperature: Collector-Emitter Saturation Voltage vs. Ambient Temperature: 0,14 1,4 0,12 1,2 IC= 1mA IF= 10mA VCE= 5V 0,8 VCE= 0,4V 0,6 Saturation Voltage (V) 0,1 VCE= 2,5V 1 Relative CTR I C= 1mA IF = 5mA I C= 1mA I F= 20mA 0,08 0,06 0,04 0,4 0,02 0,2 0 -60 0 -60 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 120 120 Ambient Temperature (°C) Ambient Temperature (°C) Testcondition: IF= 5mA; Normalized to TA= 25°C CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 001.003 2023-08-22 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-OCPT Optocoupler Phototransistor ORDER CODE 140106146000 SIZE/TYPE BUSINESS UNIT STATUS PAGE LSOP4 eiPal Valid 4/12 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Forward Current vs. Forward Voltage: Collector Current vs. Collector-Emitter Voltage: 100 IF=1mA Collector Current (mA) Forward Current (mA) 110°C 85°C 25°C0°C -55°C 10 1 0,1 0,8 0,9 1 1,1 1,2 1,3 1,4 1,5 1,6 1,7 IF=2mA IF=5mA IF=10mA IF=20mA IF=50mA 0,1 1 10 Collector-Emitter Voltage (V) Forward Voltage (V) Testcondition: TA= 25°C CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 001.003 2023-08-22 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-OCPT Optocoupler Phototransistor ORDER CODE 140106146000 SIZE/TYPE BUSINESS UNIT STATUS PAGE LSOP4 eiPal Valid 5/12 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Relative CTR vs. Forward Current: Switching time vs. Load Resistance: 1,5 30 VCE= 0.4V VCE= 5V Response Time (µs) Relative CTR 1 VCE= 2,5V 0,5 20 10 tf tr 0 0,1 0 0,1 1 10 1 100 Load Resistance (kΩ) Forward Current (mA) Testcondition: IF= 5mA; TA= 25°C 10 Testcondition: IC= 2mA; VCE= 2V; TA= 25°C CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 001.003 2023-08-22 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-OCPT Optocoupler Phototransistor ORDER CODE 140106146000 SIZE/TYPE BUSINESS UNIT STATUS PAGE LSOP4 eiPal Valid 6/12 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Gain vs. Frequency: 0 100Ω -10 Gain (dB) -20 1kΩ -30 10kΩ -40 -50 0,1 1 10 100 1000 Frequency (kHz) Testcondition: IC= 2mA; VCE= 2V; TA= 25°C CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 001.003 2023-08-22 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-OCPT Optocoupler Phototransistor ORDER CODE 140106146000 SIZE/TYPE BUSINESS UNIT STATUS PAGE LSOP4 eiPal Valid 7/12 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 A K0 P2 W3 T E1 D0 A N W B0 E2 F D W1 close to center Top Cover Tape D1 A P1 B T1 A0 T2 Start Feeding direction End W2 C Carrier Tape detail B Cover Tape Cover Tape B Chip Cavity Sprocket Hole No Component min. 160mm Components No Component min. 100mm Embossment Cover Tape min. 400mm Packaging is referred to the international standard IEC 60286-3:2019 Tape Type 2a A0 (mm) typ. 4,70 B0 (mm) typ. 10,50 W (mm) +0,3/ -0,1 16,00 T (mm) ref. 0,40 T1 (mm) ref. 0,10 T2 (mm) typ. 4,60 K0 (mm) typ. 4,20 P0 (mm) ±0,1 4,00 P1 (mm) ±0,1 8,00 P2 (mm) ±0,1 2,00 D0 (mm) +0,1/ -0,0 1,50 D1 (mm) min. 1,50 E1 (mm) ±0,1 1,75 E2 (mm) min. 14,25 F (mm) ±0,1 7,50 Material Qty. (pcs.) Polystyrene 3000 165° - 180° Tolerance Value A (mm) ± 2,0 330,00 B (mm) typ. 2,20 C (mm) typ. 13,00 D (mm) typ. 20,90 N (mm) typ. 97,20 W1 (mm) typ. 16,70 W2 (mm) typ. 20,70 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE SaVo 001.003 2023-08-22 DIN ISO 2768-1m W3 (mm) min. 15,90 W3 (mm) max. 19,40 Material Polystyrene PROJECTION METHOD DESCRIPTION Pull-off force Tape width 16 mm 0,1 N - 1,3 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-OCPT Optocoupler Phototransistor ORDER CODE 140106146000 SIZE/TYPE BUSINESS UNIT STATUS PAGE LSOP4 eiPal Valid 8/12 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³