Dimensions: [mm]
Recommended Land Pattern: [mm]
General Properties:
0,5 typ.
3
2,54 typ.
Type
2
AC
10,75
Package
7,55
Plastic Housing Color
DIP 4, S-Type
White
Certification:
4
2
3
1,54
1
10,15 ±0,3
3,54
4
1
Optocoupler Phototransistor
Input
7,62 ±0,3
1,3 ±0,1
3,5 ±0,2
Compliant [2011/65/EU&2015/863]
REACh Approval
Conform or declared [(EC)1907/2006]
Halogen Free
Conform [JEDEC JS709B]
Halogen Free
Conform [IEC 61249-2-21]
VDE Approval
40051484 [DIN EN 60747-5-5 (VDE0884-5); EN
60747-5-5:2011; A1:2015]
cULus Approval
4,3 ±0,3
0,25 typ.
6,5 ±0,2
RoHS Approval
E513104 [UL 1577]
CQC Approval
CQC20001274582 [GB4943.1-2001; GB8898-2011]
Schematic:
0,8 typ.
1
4
2
3
4,58 ±0,2
General Information:
1
4
Anode/ Cathode
Collector
2
Cathode/ Anode
3
Operating Temperature
-55 up to +110 °C
Storage Conditions (for single
parts)
-55 up to +125 °C
Storage Conditions (in original
packaging)
< 40 °C ; < 75 % RH
Moisture Sensitivity Level (MSL)
1
Emitter
Scale - 3:1
Product Marking:
Pin 1 Anode
Marking
Marking - Date Code
•
814 (Series 814)
YWW
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
SaVo
001.003
2023-08-22
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-OCPT Optocoupler
Phototransistor
ORDER CODE
140814242000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DIP 4
eiPal
Valid
1/12
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Absolute Maximum Ratings Input Properties (Ambient Temperature 25 °C unless
otherwise specified):
Properties
Test conditions
Forward Current
IF max.
Peak Forward Current
IF Peak duty/ 100 @ 100 Hz
Input Power Dissipation
Reverse Voltage
Value
Electrical & Optical Output Properties:
Unit
±60 mA
±1 A
PI
100
mW
VREV
6
V
Absolute Maximum Ratings Output Properties: (Ambient Temperature 25 °C unless
otherwise specified):
Properties
Value
Unit
Collector Emitter Voltage
VCE
80
V
Emitter Collector Voltage
VEC
7
V
Collector Current
ICE.P
50
mA
PO
150
mW
Output Power Dissipation
Absolute Maximum Ratings Common Properties:
Properties
Value
Unit
PDiss
Test conditions
200
mW
Isolation Voltage
VISO AC for 1 Minute, RH 40~60 %
5000
V (RMS)
Total power dissipation of the whole component
Test conditions
Forward Voltage
VF
IF = +/- 10 mA
Reverse Current
IREV
VREV = 6 V
Input Capactiance
Cin
V=0V
f = 1 kHz
Value
Unit
typ.
max.
1.24
1.4
V
10
µA
10
min.
max.
Unit
ICEO.Dark VI CE= =0 20 V
F
Collector-Emitter Breakdown
Voltage
V(BR)CE
IC = 100 µA
IF = 0
80
V
Emitter-Collector Breakdown
Voltage
V(BR)EC
IE = 100 µA
IF = 0
7
V
100
nA
Electrical & Optical Transfer Properties:
Properties
Current Transfer Ratio
Collector-Emitter Saturation
Voltage
Test conditions
Value
min.
typ.
max.
IF = +/- 1 mA
VCE = 5 V
20
300
1 mA
CTR SYM IVF = =+/CE 5 V
0.7
1.3
CTR
VCEsat
IF = +/- 20 mA
IC = 1 mA
Unit
%
0.06
0.2
V
Rise Time
tr
VCE = 2 V
IC = 2 mA
RL = 100 Ω
3
18
µs
Fall Time
tf
VCE = 2 V
IC = 2 mA
RL = 100 Ω
4
18
µs
Cut-Off Frequency
fc
VCE = 2 V
IC = 2 mA
RL = 100 Ω
-3 dB
80
kHz
Floating Capacitance
CIO
V=0V
f = 1 MHz
0.4
pF
Electrical & Optical Input Properties:
Properties
Value
Test conditions
Collector-Emitter Dark Current
CTR Symmetry
Power Dissipation 1)
1)
Properties
pF
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
SaVo
001.003
2023-08-22
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-OCPT Optocoupler
Phototransistor
ORDER CODE
140814242000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DIP 4
eiPal
Valid
2/12
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Electrical & Optical Transfer Properties:
Properties
Isolation Resistance
Test conditions
RISO
DC = 500 V
40~60 % R.H.
Total Power Dissipation vs. Ambient Temperature:
Value
min.
typ.
1
100
max.
Unit
160
TΩ
Phototransistor- PO (mW)
Collector Power Dissipation (mW)
Forward Current (mA)
140
120
100
80
60
IR-diode - IF (mA)
40
20
0
-55
-35
-15
5
25
45
65
85
105
125
Ambient Temperature (°C)
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
SaVo
001.003
2023-08-22
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-OCPT Optocoupler
Phototransistor
ORDER CODE
140814242000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DIP 4
eiPal
Valid
3/12
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Collector Dark Current vs. Ambient Temperature:
Relative CTR vs. Ambient Temperature:
1,4
10000
1,2
VCE= 20V
1000
1
Relative CTR
Collector Dark Current (nA)
VCE= 10V
100
0,8
VCE= 2,5V
0,6
0,4
VCE= 5V
10
VCE= 0,4V
0,2
1
0
25
45
65
85
105
125
-60
-40
-20
Ambient Temperature (°C)
0
20
40
60
80
100
120
Ambient Temperature (°C)
Testcondition: IF= +/- 1mA; Normalized to TA= 25°C
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
SaVo
001.003
2023-08-22
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-OCPT Optocoupler
Phototransistor
ORDER CODE
140814242000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DIP 4
eiPal
Valid
4/12
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Collector-Emitter Saturation Voltage vs. Ambient Temperature:
Forward Current vs. Forward Voltage:
0,14
100
IC= 1mA
IF = 5mA
110°C 85°C 25°C 0°C -55°C
0,12
Saturation Voltage (V)
0,08
IC= 1mA
IF= 20mA
0,06
0,04
Forward Current (mA)
I C= 1mA
I F= 10mA
0,1
10
1
0,02
0
-60
-40
-20
0
20
40
60
80
100
120
0,1
0,8
0,9
1
1,1
1,2
1,3
1,4
1,5
1,6
1,7
Ambient Temperature (°C)
Forward Voltage (V)
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
SaVo
001.003
2023-08-22
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-OCPT Optocoupler
Phototransistor
ORDER CODE
140814242000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DIP 4
eiPal
Valid
5/12
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Collector Current vs. Collector-Emitter Voltage:
Relative CTR vs. Forward Current:
2
IF=1mA
VCE= 5V
IF=2mA
IF=10mA
IF=20mA
IF=50mA
1,5
Relative CTR
Collector Current (mA)
IF=5mA
VCE= 2,5V
1
VCE= 0.4V
0,5
0,1
1
10
0
0,1
1
Collector-Emitter Voltage (V)
Testcondition: TA= 25°C
10
100
Forward Current (mA)
Relative to IF= 1mA; TA= 25°C
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
SaVo
001.003
2023-08-22
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-OCPT Optocoupler
Phototransistor
ORDER CODE
140814242000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DIP 4
eiPal
Valid
6/12
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Switching time vs. Load Resistance:
Gain vs. Frequency:
0
30
100Ω
1kΩ
20
-20
Gain (dB)
Response Time (µs)
-10
10
10kΩ
-30
tf
-40
tr
0
0,1
1
10
-50
0,1
1
10
1000
Frequency (kHz)
Load Resistance (kΩ)
Testcondition: IC= 2mA; VCE= 2V; TA= 25°C
100
Testcondition: IC= 2mA; VCE= 2V; TA= 25°C
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
SaVo
001.003
2023-08-22
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-OCPT Optocoupler
Phototransistor
ORDER CODE
140814242000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DIP 4
eiPal
Valid
7/12
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Packaging Specification - Tape: [mm]
Packaging Specification - Reel: [mm]
P0
A
K0
P2
W3
T
E1
D0
A
N
W
B0
E2
F
D
W1
close to center
Top Cover
Tape
D1
A
P1
B
T1
A0
T2
Carrier Tape
Start
Feeding direction
End
W2
C
detail B
Cover Tape
Cover Tape
B
Chip Cavity
Sprocket Hole
No Component
min. 160mm
Components
No Component
min. 100mm
Embossment
Cover Tape
min. 400mm
Packaging is referred to the international standard IEC 60286-3:2019
Tape Type
Tolerance
Value
2a
A0
(mm)
typ.
5,00
B0
(mm)
typ.
10,75
W
(mm)
+0,3/ -0,1
16,00
T
(mm)
ref.
0,40
T1
(mm)
ref.
0,10
T2
(mm)
typ.
5,20
K0
(mm)
typ.
4,80
P0
(mm)
±0,1
4,00
P1
(mm)
±0,1
8,00
P2
(mm)
±0,1
2,00
D0
(mm)
+0,1/ -0,0
1,50
D1
(mm)
min.
1,50
E1
(mm)
±0,1
1,75
E2
(mm)
min.
14,25
F
(mm)
±0,1
7,50
Material
Qty.
(pcs.)
Polystyrene
1500
165° - 180°
Tolerance
Value
A
(mm)
± 2,0
330,00
B
(mm)
typ.
2,20
C
(mm)
typ.
13,00
D
(mm)
typ.
20,90
N
(mm)
typ.
97,20
W1
(mm)
typ.
16,70
W2
(mm)
typ.
20,70
CHECKED
REVISION
DATE (YYYY-MM-DD)
GENERAL TOLERANCE
SaVo
001.003
2023-08-22
DIN ISO 2768-1m
W3
(mm)
min.
15,90
W3
(mm)
max.
19,40
Material
Polystyrene
PROJECTION
METHOD
DESCRIPTION
Pull-off force
Tape width
16 mm
0,1 N - 1,3 N
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
Tel. +49 (0) 79 42 945 - 0
www.we-online.com
eiSos@we-online.com
WL-OCPT Optocoupler
Phototransistor
ORDER CODE
140814242000
SIZE/TYPE
BUSINESS UNIT
STATUS
PAGE
DIP 4
eiPal
Valid
8/12
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH
& Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation, transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic
component which is used in electrical circuits that require high safety and reliability functions or performance.
Classification Reflow Profile for SMT components:
Classification Reflow Soldering Profile:
Profile Feature
Tp
tp
Max. Ramp Up Rate
Max. Ramp Down Rate
TL
Temperature
Ts max
tL
Preheat Area
Ts min
TC –5°C
Value
Preheat Temperature Min
Ts min 150 °C
Preheat Temperature Max
Ts max 200 °C
Preheat Time ts from Ts min to Ts max
ts
Ramp-up Rate (TL to TP)
max. 60 - 120 seconds
3 °C/ second max.
Liquidous Temperature
TL
217 °C
Time tL maintained above TL
tL
max. 60 seconds
Peak package body temperature
Tp
Tp ≤ Tc, see Table below
Time within 5°C of actual peak
temperature
tp
max. 10 seconds
Ramp-down Rate (TP to TL)
6 °C/ second max.
Time 25°C to peak temperature
max. 220 seconds
refer to IPC/ JEDEC J-STD-020E
tS
Package Classification Reflow Temperature (Tc):
Volume mm³
350-2000
Volume mm³
>2000
PB-Free Assembly | Package Thickness 260 °C
< 1.6 mm
260 °C
260 °C
PB-Free Assembly | Package Thickness 260 °C
1.6 mm - 2.5 mm
250 °C
245 °C
PB-Free Assembly | Package Thickness 250 °C
> 2.5 mm
245 °C
245 °C
Properties
25
Time 25°C to Peak
Time
Applied cycles
Volume mm³
工商网监
湘ICP备2023018690号
