150066RG74000

Dimensions: [mm] Recommended Land Pattern: [mm] Absolute Maximum Ratings (Ambient Temperature 25°C): Properties typ 3 1 4 0,9 ±0,1 2 Test conditions 72 mW Power Dissipation (Green) PDiss G 105 mW Peak Forward Current IF Peak ESD Threshold/ Human Body Model Junction Temperature 3 60 mA IF duty/ 10 @ 1 kHz 30 mA VREV 5 V VESD HBM 1000 V TJ 95 °C Optical Properties: Chip Technology 3° 0,7 ±0,1 Scale - 15:1 Waterclear General Information: 1 R + 4 1,6 ±0,1 3 Red & Green Lens Type Polarity Mark 4 AlInGaP + InGaN Emitting Color Schematic: 0,3 ±0,1 1,6 ±0,1 2 Unit PDiss R Reverse Voltage 1,1 ±0,1 1 Value Power Dissipation (Red) Continuous Forward Current 1,7 4 1 0,8 0,3 . 2 0,2 2,0 1,5 ±0,1 R0 ,1 6 2 G + 3 Operating Temperature -40 up to +85 °C Storage Conditions (in original packaging) < 40 °C ; < 90 % RH Storage Conditions (for single parts) -40 up to +100 °C Moisture Sensitivity Level (MSL) 3 Scale - 15:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 002.000 2022-03-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SBCW SMT Bi-color Chip LED Waterclear ORDER CODE 150066RG74000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0606 eiPal Valid 1/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Electrical & Optical Properties: Test conditions Value min. typ. max. Unit Peak Wavelength (Red) λPeak R 20 mA 630 nm Peak Wavelength (Green) λPeak G 20 mA 515 nm Dominant Wavelength (Red) λDom R 20 mA 625 nm Dominant Wavelength (Green) λDom G 20 mA 520 nm mcd Luminous Intensity (Red) IV R 20 mA 150 300 Luminous Intensity (Green) IV G 20 mA 330 560 Forward Voltage (Red) VF R 20 mA 2 2.4 V Forward Voltage (Green) VF G 20 mA 3.2 3.4 V Spectral Bandwidth (Red) Δλ R 20 mA 20 nm Spectral Bandwidth (Green) Δλ G 20 mA 30 nm Reverse Current IREV 5V Viewing Angle Phi 0° 2θ50% 20 mA mcd 10 130 Certification: RoHS Approval Compliant [2011/65/EU&2015/863] REACh Approval Conform or declared [(EC)1907/2006] µA ° - 65° 0° 10° 100 20° 30° 90 Relative Luminous Intensity (%) Properties Viewing Angle: 40° 80 45° 70 50° 60 50 60° 65° 40 70° 30 Halogen Free Conform [IEC 61249-2-21] 20 Halogen Free Conform [JEDEC JS709B] 10 80° 90° -90 -45 0 10 20 30 40 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 002.000 2022-03-24 DIN ISO 2768-1m 50 60 70 80 90 100 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SBCW SMT Bi-color Chip LED Waterclear ORDER CODE 150066RG74000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0606 eiPal Valid 2/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Spectral: Forward Current vs. Forward Voltage: 60 50 100 Forward Current [mA] Relative Intensity [%] 80 60 40 20 40 30 20 0 400 450 500 550 600 650 700 750 Wavelength [nm] 10 0 1,5 2,0 2,5 3,0 Forward Voltage [V] CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 002.000 2022-03-24 DIN ISO 2768-1m 3,5 4,0 PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SBCW SMT Bi-color Chip LED Waterclear ORDER CODE 150066RG74000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0606 eiPal Valid 3/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Luminous Intensity vs. Forward Current: Derating Curve: 1000 40 900 35 800 30 Forward Current [mA] Luminous Intensity [mcd] 700 600 500 400 25 20 15 10 300 200 5 100 0 0 10 20 0 0 10 20 30 40 Forward Current [mA] 50 30 40 50 60 70 80 90 Ambient Temperature [°C] 60 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 002.000 2022-03-24 DIN ISO 2768-1m PROJECTION METHOD DESCRIPTION Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SBCW SMT Bi-color Chip LED Waterclear ORDER CODE 150066RG74000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0606 eiPal Valid 4/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Packaging Specification - Tape: [mm] Packaging Specification - Reel: [mm] P0 A K0 P2 T W3 E1 D0 W1 close to center A E2 B0 N W F D B C Top Cover Tape D1 A P1 A0 End W2 T1 T2 Polarity Mark Feeding direction Start Carrier Tape detail B Cover Tape B Cover Tape Chip Cavity Sprocket Hole No Component min.160mm Components No Component min.100mm Cover Tape min. 400mm Embossment packaging is reffered to the international standard IEC 60286-3:2013 A0 typ. 1,83 B0 typ. 1,83 W +0,3/ -0,1 8,00 T max. 0,60 T1 max. 0,10 T2 typ. 1,26 K0 typ. 0,95 P0 ±0,1 4,00 P1 ±0,1 4,00 P2 ± 0.05 2,00 D0 +0,1/ -0,0 1,50 D1 min. 0,30 E1 ±0,1 1,75 E2 min. 6,25 F ± 0.05 3,50 Tape Type 2a Polycarbonate VPE / packaging unit pcs. 4000 165° - 180° A (mm) ± 2,0 178 B (mm) min. 1.5 C (mm) min. 12.8 D (mm) min. 20.2 N (mm) min. 50 W1 (mm) +1,5 8.4 W2 (mm) max. 14.4 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PLD 002.000 2022-03-24 DIN ISO 2768-1m W3 (mm) min. 7.9 W3 (mm) max. 10.9 Material Polystyrene PROJECTION METHOD DESCRIPTION Pull-of force Tape width 8 mm 0,1 N - 1,0 N Würth Elektronik eiSos GmbH & Co. KG EMC & Inductive Solutions Max-Eyth-Str. 1 74638 Waldenburg Germany Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos@we-online.com WL-SBCW SMT Bi-color Chip LED Waterclear ORDER CODE 150066RG74000 SIZE/TYPE BUSINESS UNIT STATUS PAGE 0606 eiPal Valid 5/9 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. Classification Reflow Profile for SMT components: Classification Reflow Soldering Profile: Profile Feature Tp tp Max. Ramp Up Rate Max. Ramp Down Rate TL Temperature Ts max tL Preheat Area Ts min TC –5°C Value Preheat Temperature Min Ts min 150 °C Preheat Temperature Max Ts max 200 °C Preheat Time ts from Ts min to Ts max ts Ramp-up Rate (TL to TP) max. 60 - 120 seconds 3 °C/ second max. Liquidous Temperature TL 217 °C Time tL maintained above TL tL max. 60 seconds Peak package body temperature Tp Tp ≤ Tc, see Table below Time within 5°C of actual peak temperature tp max. 10 seconds Ramp-down Rate (TP to TL) 6 °C/ second max. Time 25°C to peak temperature max. 220 seconds refer to IPC/ JEDEC J-STD-020E tS Package Classification Reflow Temperature (Tc): Volume mm³ 350-2000 Volume mm³ >2000 PB-Free Assembly | Package Thickness 260 °C < 1.6 mm 260 °C 260 °C PB-Free Assembly | Package Thickness 260 °C 1.6 mm - 2.5 mm 250 °C 245 °C PB-Free Assembly | Package Thickness 250 °C > 2.5 mm 245 °C 245 °C Properties 25 Time 25°C to Peak Time Applied cycles Volume mm³